Filters
If high spring pressures or extreme operating conditions have you worried about lobe scuff and lifter wear, then these Crower Camsaver hydraulic lifters are for you. They deliver 20 to 30 percent more oil to your lobe and lifter faces for the best possible insurance against premature lobe and lifter failure. These flat tappet styles are available in a variety of outside diameters for proper fitment on specific applications.
( 62 )
$14.99
—
$18.99
Crower ZPaste camshaft assembly lubricant is specially formulated to stay on contact points longer than other lubes, protecting parts from damage during initial startup. And after being dissolved in the oil, ZPaste's components will continue to help protect engine parts during break-in. Protect your cams, lifters, and other valve components during initial startup with the ultimate cam assembly lubricant—ZPaste. Crower ZPaste lubricant features: * Proprietary formulation of Zinc Dialkyl DithioPhosphate (ZDDP) types with a Molybdenum DiSulfide (MoS2) additive in a Calcium Sulfonate base * Extreme adhesion allows it to remain in place longer during initial break-in * ZPaste is designed to be used along with a bottle of ZDDPlus for initial engine break-in, and actually, increases the ZDDP level of your oil as it dissolves--no special break-in oil is required
Not Yet Reviewed
$46.79
Crower hydraulic lifters feature ball-check oil control valving, precision radius faces, and quick break-in. New lifters must be used when installing a new camshaft, to avoid premature lobe and lifter wear. These flat tappet styles are available in a variety of outside diameters. Order the model that best suits your application.
( 17 )
$11.99
—
$15.99
Crower Coolface solid lifters feature a small-diameter .024 in. metering port that is precision-machined in the face of the lifter. They will provide longer camshaft and lifter life with no loss of oil pressure. These lifters are designed to eliminate lobe and lifter wear caused by inadequate lubrication at the cam and lifter surface. With today's high-rpm, high rocker arm ratio and high spring pressures, cam and lifter failure is at an all-time high. To make sure that you don't experience any problems, install Crower Coolface solid lifters for maximum reliability. They're available in a variety of diameters for fitment on specific vehicle and engine applications.
( 5 )
$19.99
Crower performance valve springs are available for a variety of applications. Proper valve springs are essential to valvetrain performance, when matched with the right cam. With Crower valve springs, you can get the performance you want at a price you'll like.
( 18 )
$11.99
—
$22.99
These high-quality Crower cam bolts have increased preload clamping force to ensure positive timing gear register. Their increased material strength overcomes valvetrain harmonics and stress. Crower cam bolt kits have a reduced head size that makes installation and removal easier.
( 1 )
$10.99
Only the finest 4130 seamless chromoly tubing is used to manufacture Crower radius pushrods. All ends are heat-treated to a surface hardness of RC60 for maximum durability and wear resistance. Crower's clearance tip radius pushrods feature one end with a 210 degree radius, and are available in 5/16 and 3/8 in. diameters for high-lift applications where added clearance is necessary.
Not Yet Reviewed
$16.99
Crower LS1 beadlock 7-degree valve stem keepers provide superior clamping. These billet performance keepers are precision machined from premium billet bar stock chromoly steel and are heat-treated for maximum strength to ensure against shoulder shearing (common with stock and lesser quality keepers). Crower offers standard height, .050 in. higher, and .050 in. lower to achieve the correct installed spring height.
( 1 )
$13.99
These solid lifters from Crower help to avoid premature lobe wear and ensure long cam and lifter life. They feature precision-ground radius faces and finishes for fast break-in and trouble-free operation.
( 14 )
$13.99
—
$22.99
Crower camshaft degree checking springs are designed to help you get your camshaft degreed in properly. They are direct replacements for Crower degreeing kits.
Not Yet Reviewed
$16.99
Crower Cheater hydraulic lifters are really solid lifters; they just look like hydraulics. These lifters are available for Chevy and some Ford applications.
Not Yet Reviewed
$17.99
—
$19.99
Crower's valve spring retainers are made of high-quality steel and are machined and heat-treated for strength. They have a black oxide finish to guard against the damaging effects of rust and corrosion.
( 3 )
$12.99
Crower Cams connecting rod alignment sleeves are precision ground from high-grade alloy. These hollow dowel sleeves are offered individually in several diameters from 5/16 in. to 1/2 in. When you employ a set of Crowerods, fit them with genuine connecting rod alignment sleeves from Crower for flawless performance.
Not Yet Reviewed
$11.99
Crower uses premium aluminum-bronze, one-piece billet bushings in all of the rods that they manufacture.
Not Yet Reviewed
$22.99
Crower rocker arm studs are rated to 190,000 psi tensile strength and ensure reliability in your valvetrain. These screw-in studs are machined and finished from 8740 aircraft quality steel and heat-treated for maximum strength. All the threads of Crower rocker arm studs are cold rolled for concentricity and extreme durability.
Not Yet Reviewed
$11.99
Crower lash caps protect the ends of your valves from excessive wear and help to correct rocker geometry by increasing rocker arm to retainer clearance. Machined from high-grade chromoly steel and heat-treated for added strength, they give your valves an added .060 in. margin of protection. Highly recommended for performance applications, they're a must for costly stainless steel or titanium valves.
( 4 )
$18.99
Crower valve spring seat cups eliminate the need for seat cutting in some instances and shimming in others. Designed to keep springs from wandering, these seat cups also protect aluminum heads from galling. Spring seat discs are available as well.
( 1 )
$11.99
—
$12.99
These Crower high strength steel alloy connecting rod bolts will make sure you have a strong foundation for your connecting rods. They feature 180,000 psi tensile strength, 12-point heads, and rolled threads after the heat-treating process.
Not Yet Reviewed
$19.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
