Filters
JET Performance Products brings decades of drag racing, stock car, and off-road know-how to every one of its tuning products, and you’ll find them all right here...
JET Performance Products brings decades of drag racing, stock car, and off-road know-how to every one of its tuning products, and you’ll find them all right here at Summit Racing! Choose from an extensive line of high–volume carburetors and accessories for your musclecar or hard-working truck, and put all of that power to the ground with JET’s variety of transmission performance products. For newer vehicles, check out JET’s carburetors, chips, modules, and handheld programmers to instantly modify air and fuel ratios, ignition timing, shift points, and factory settings for an easy...
JET Performance Products brings decades of drag racing, stock car, and off-road know-how to every one of its tuning products, and you’ll find them all right here at Summit Racing! Choose from an extensive line of high–volume carburetors and accessories for your musclecar or hard-working truck, and put all of that power to the ground with JET’s variety of transmission performance products. For newer vehicles, check out JET’s carburetors, chips, modules, and handheld programmers to instantly modify air and fuel ratios, ignition timing, shift points, and factory settings for an easy performance boost without getting your hands dirty!
JET Streetmaster Quadrajet Stage 2 carburetors have all the same great attributes of JET's Stage 1 versions—plus the additional benefits of fully recalibrated idle, off idle, main, accelerator pump, and high-speed circuits to match any modifications done to the engine, such as the intake manifold, headers, ignition, or mild cam change. With the JET Streetmaster Quadrajet Stage 2 carburetors, you can expect improved idle quality, and instant throttle response, along with maximum torque and horsepower for street/strip vehicles, tow vehicles, RVs, and watercraft with modified engines.
( 113 )
$499.95
The JET Streetmaster Quadrajet Stage 1 carburetors start with a complete disassembly of the hand selected core, cleaning and inspection procedure. The casting plugs are sealed with epoxy to prevent leak-down into the intake manifold. All circuits are checked for proper sizing and the calibration is checked for proper jets, primary metering rods and secondary metering rods. The carburetor is then carefully reassembled using the highest quality components with a new float, choke pull-off and bronze brushed throttle shafts. Stage 1 Quadrajet carburetors are intended to restore factory stock performance. Not intended for engines with RV or performance type cams.
( 33 )
$499.95
JET Powr-Flo mass airflow sensors are designed to deliver improved horsepower, torque, and mileage from your car, truck, or SUV by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET mass air sensors provide airflow increases of up to 45 percent and installs in 10 minutes or less. They are compatible with other aftermarket upgrades including but not limited to: Performance tuning (chips, modules, etc.), exhaust modifications (cat-back, headers, etc.), cold air intakes, and ignition systems. Order the model designed to fit your needs.
( 233 )
$149.96
—
$337.49
JET Powr-Flo throttle bodies are direct replacements for factory units, and can be used to replace a worn-out throttle body or to upgrade your existing throttle body. They provide increased airflow for improved throttle response by taking advantage of JET's unique inlet design, and they include all new pre-installed calibrated electronics to allow for a simple "remove and replace" installation. JET Powr-Flo throttle bodies increase air velocity to the intake manifold, improving throttle reaction and provide horsepower throughout the entire rpm range. Order the JET Powr-Flo throttle body compatible with your vehicle.
( 105 )
$284.96
—
$469.46
Jet Stage 3 Quadrajet carburetors are intended for serious street/strip and race applications such as Circle Track and NHRA Super Stock classes. An oversized 0.149 in. needle and seat assembly is the start to these fully modified race carburetors. Main well size is increased and balanced to ensure proper top-end, high-rpm fuel flow. The Stage 3 carburetors' extensive circuit modifications are performed to keep the fuel curve correct throughout the rpm range. They will help you to obtain clean idle quality and instant off-the-line response for consistent, race-winning performance.
( 8 )
$499.95
JET Rochester 2G Stage 1 carburetors are perfect for use in Circle Track racing. JET begins with a .130 in. needle and seat assembly for adequate fuel supply, and a small diameter float for maximum float blow volume. The cluster is then modified, based on engine and vehicle specs, to keep the fuel curve correct throughout the rpm range. Idle, transition, and accelerator pump circuits are modified for each specific application. The 2Gs are then tapped to accept Holley jets for ease of tuning, and finished with a 3/8 in. fuel inlet. Only the highest quality components are used throughout the assembly process as the 2Gs are returned to factory color and condition.
( 14 )
$399.95
JET Performance has released these Quadrajet carburetors for Chevy and GMC cars and trucks with 396 c.i.d. and larger modified big block engines. The carburetors are extensively reworked with an increased main well size and are balanced to ensure top-end high-rpm fuel flow. Several circuit modifications are made to keep the fuel curve correct throughout the entire rpm range and to keep consistent idle quality. The carburetors include a .149 in. needle and seat to ensure adequate fuel flow. They are designed for modified big block motors with dual plane intake manifolds, headers, an 8.5-9.5:1 compression ratio, and mild ported or aftermarket heads.
( 15 )
$499.95
TH-700-R4 transmissions are controlled by an adjustable throttle valve (TV) cable that attaches to the carburetor or injector linkage with a special bracket. The cable regulates internal line pressure, shift points, and downshifts, so proper installation and adjustment is critical. These JET TV cable brackets fit most popular carburetors and TBI units for TH-700-R4 Conversions. These brackets are designed to work with GM factory cables.
( 21 )
$59.96
These JET adjustable TBI billet fuel pressure regulators ensure that your vehicle's fuel supply is precisely metered for optimum mileage and performance. Don't take chances with your fuel supply--rely on Jet for your vehicle's fuel system needs.
( 12 )
$119.96
—
$149.96
JET offers a complete line of marine carburetors to keep your boat motoring the waterways. They are remanufactured using the highest quality parts to meet strict quality standards and ensure high performance for your boat. Don't be left in the wash--power your vessel with quality remanufactured JET marine carburetors.
( 19 )
$367.46
—
$499.95
With one of these low-temperature JET thermostats, you get consistent engine cooling and increased horsepower by reducing engine temperature. You'll also obtain more precise metering of water throughout your engine—as well as a long product life, since the thermostats are made from stainless steel.
( 132 )
$18.94
—
$59.24
JET Performance programmers let you take control and program your own vehicle computer to match your driving style. JET's exclusive Tri-Power tuning allows you to program for performance using lower cost regular octane fuel, or for optimal performance gains you can program for mid-grade or premium fuels. All three tuning modes are designed to operate the engine at peak efficiency based on the octane level being used to improve horsepower and mileage. The programmer will also correct your speedometer and turn off the ABS system trouble light if you change tire size or gear ratios. JET Performance programmers include a built-in scan tool to read and clear diagnostic trouble codes when your check engine light comes on saving you a costly trip to the dealer. The programmer simply plugs into the vehicle's diagnostic port under the dash and then the easy to use installation software allows you to make your changes by answering simple yes or no questions.
( 13 )
$337.49
—
$352.46
Designed for the performance enthusiast who wants total control of their vehicle's programming, JET Dynamic Spectrum Tuners are powerful tuning packages. Their DST software provides you with the tools needed for precise ECU performance tuning, using your laptop or PC. Use of this software will give you the ability to modify virtually every aspect of the vehicle's programming. The stock programming from the vehicle is initially downloaded and saved to your PC with the supplied JET interface cable that connects to the vehicle's diagnostic port. The stock programming can be reloaded to the computer at any time, to return the vehicle's ECU to its original state. The comprehensive, easy-to-use software allows extensive modification of the vehicle's software. This allows control of fuel and spark tables, speed and rev limiters, transmission functions, torque management tables, and many other functions. Modifications are made using detailed table and graph views for easy and accurate parameter editing. Your modifications are saved as a new file, and downloaded to the vehicle's computer.
( 21 )
$399.99
Are you looking to upgrade your Quadrajet carburetor's choke from a heat tube style to an electric unit? If so, then these Jet electric choke conversion kits are exactly what you need. These kits include an electric choke thermostat, choke hold-downs, a drill bit, tap, and all other necessary hardware and electrical connectors to make for a complete installation. Get more convenience and reliability from your Quadrajet with these Jet electric choke conversion kits.
( 18 )
$52.46
JET carburetor fuel lines give your installation professional fit, function, and style. Made from top-grade stainless steel and hand-polished, they present your Holley or Holley-style carburetor with a custom look of high performance. The fuel lines include aluminum fittings anodized in your choice of several colors, as well as the fittings and gaskets for the carburetor bowls and a -6 AN inlet fitting. Make your engine bay look great with the addition of JET stainless steel carburetor fuel lines.
( 3 )
$74.96
—
$104.96
Restore lost horsepower caused by vacuum leaks or worn-out parts with one of these JET carburetor rebuild kits. Your carb regulates the precise amount of fuel and air to maximize engine performance, but sealing components need to be updated periodically. JET rebuild kits are available for a variety of carburetors, such as Holley, Quadrajet, and Rochester, and they include all parts needed for your specific make/model--gaskets, seals, O-rings, needle and seat assemblies, and accelerator pumps. Find the rebuild kit to match your carburetor specs, and experience the efficiency upgrade of JET Performance.
( 14 )
$46.46
—
$51.71
These JET Powr-Flo throttle body spacers use aerospace engineering combined with years of experience. The exceptional design of the bore causes the incoming airflow to actually smooth out and speed up. This creates a type of compacted air-charge that enters through the throttle body and builds pressure in the combustion chamber. This will result in an extensive gain in the midrange power band and an overall increase in fuel economy.
( 69 )
$96.94
—
$132.71
These JET Holley bushing service kits contain everything you need for smooth throttle operation. These service kits include 16 throttle shaft bushings, a reamer, and instructions.
( 4 )
$112.46
JET adjustable TPI fuel pressure regulators enable you to obtain maximum efficiency and horsepower gains in a tuned port injection system. Unlike other designs, these JET regulators incorporate a steel insert on the adjuster to avoid stripping. Convert your factory regulator to an adjustable-style TPI fuel pressure regulator for the performance you demand!
( 3 )
$119.96
JET Stage 2 performance chips/modules have been programmed to deliver peak power increases under hard throttle conditions, such as towing and wide-open throttle. These modules offer a full-range of DST programming of the air/fuel ratio, ignition advance, and transmission, and are fully track and dyno tested to ensure the most possible power without affecting day-to-day drivability. Stage 2 power chips/modules must use the following for proper performance: * 180 degree thermostat * 91 octane or greater fuel * Free-flowing exhaust
( 107 )
$141.71
—
$292.46
Quadrajet carburetor electric choke thermostats from Jet Performance are replacement only. These quality components are designed to fit all Quadrajets that came with an electric choke, including the Jet Quadrajet carburetor models with an electric choke (35001, 35002, 36001, and 36002).
( 13 )
$32.21
Jet skip shift eliminators bypass the computer aided gear selector feature (first to fourth gear) on newer GM six speed transmissions. These units are OBDII compatible, and installation is a simple unplug and plug in.
( 39 )
$32.96
JET quadrajet bushing service kits will restore your throttle valve assembly to better than new tolerances. Using the supplied bronze bushings, they eliminate common vacuum leak problems, inconsistent idle speeds, and binding or sticking throttle. The kits contain 16 bushings, 1 drill bit reamer, 4 retaining screws and an instruction sheet.
( 2 )
$99.71
JET Quadrajet bolt kits are designed to properly fit various Quadrajet and Rochester Quadrajet carburetors. They include two long bolts, two studs, and the accompanying washers and nuts. JET Quadrajet bolt kits are standard hex-style, stainless steel with a polished finish.
( 2 )
$14.21
Modal Header
Truck / SUV
Jeep®
Gifts, Clothing, & More
Restoration
Stock Replacement
Late Model Muscle
Tools
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
