Filters
The amazing HydraMat fuel pickups feature Holley's patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks, as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling. The Holley HydraMat fuel pickups are the solution! Surface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity. Holley HydraMats are available in various sizes and shapes to fit a wide variety of stock fuel tanks and/or race fuel cells. Features and benefits: * Patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells * Greatly reduces the potential for air to enter into the fuel system which can result in poor engine performance and/or engine stalling * Perfect for vehicles experiencing fuel starvation during hard cornering, acceleration, stopping, inclines, and low fuel conditions * Surface tension and fluid wicking allow the HydraMat to continue to draw fuel from the tank or cell even when part of the mat uncovered * As an area of the HydraMat is uncovered, tiny pores in the media seal off through surface tension, forcing fuel to be drawn from other areas of the mat where fuel continues to be available * Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions * Eliminates the need for specialty reservoirs, sumps and pick up pumps saving cost and greatly reducing complexity * Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump * Can be folded and compressed for easy installation through a variety of fuel cell openings * HydraMats are also available in other sizes and shapes to fit a variety of stock fuel tanks and/or race fuel cells * Not for use with diesel fuels
( 64 )
$181.95
—
$227.95
Rhodes Race Cars Pro Series fuel cells are made specifically to support today's high-horsepower vehicles and their thirst for more fuel. These fuel cells are built to match the high fuel demands required by pump manufacturers. All of their cells are made from .100 thick, 5051 aircraft aluminum alloy—to ensure the best quality material and craftsmanship go into every cell produced. All Pro Series cells feature an aircraft-style flush mount cap, as well as AN fittings for the pick-up, vent, and return fittings. They're available in a variety of sizes and tank capacities, with or without sending units.
( 26 )
$139.95
—
$269.95
ATL fuel cell replacement SF103 foam renews the anti-slosh, explosion suppression, and safety of your cell. The SF103 foam kits are ATL's most popular for gas and limited alcohols, and are available in many sizes, densities, and styles for a variety of cells. Although engineered to last, high alcohol content in fuels will impact the life span of the foam. Inspect your foam quarterly, and when you need to replace, go with ATL.
( 29 )
$119.99
—
$268.99
Summit Racing™ aluminum fuel cells are crafted from 5051 aircraft aluminum alloy with TIG-welded seams. They offer superior strength in a lightweight package. The cells are available in nearly a dozen sizes/capacities, with models that are compatible with gasoline, diesel, alcohol, or E85. Depending on the fuel cell you select, other features may include: flush-mount, aircraft-style cap; -8 AN pickup; vent; return fittings; foam; and 0-90 ohm GM sending unit. Order the model best-suited for your vehicle.
( 116 )
$169.99
—
$275.99
Summit Racing™ fuel tanks are designed to meet or exceed the quality of factory fuel tanks. Whether you have a track car, classic car, or car you're restoring, Summit Racing™ has the high-quality fuel tanks you're looking for.
( 208 )
$101.99
—
$271.99
Rhodes Race Cars Drag Series fuel cells are made from .100 thick, 5051 aircraft aluminum alloy to ensure the best quality material and craftsmanship go into every cell they produce. They also feature an aircraft-style flush mount cap, plus AN fittings for the pick-up, vent, and return fittings. These fuel cells are available in a variety of sizes and tank capacities, with or without sending units.
( 32 )
$209.95
—
$269.95
These OER fuel tank kits were made to replace all of the necessary components on multiple applications. Each kit provides the individual components needed for a complete replacement. When looking to replace your fuel tank, make sure that you take care of everything else with these OER fuel tank kits.
( 10 )
$136.99
—
$249.99
RCI drag race fuel cells combine rugged construction with intelligent engineering to keep you safe and help you win. They feature tough polyethylene construction for maximum impact resistance and available internal safety foam to reduce fuel slosh. RCI gives you a selection of flat bottom or sump-style pick-ups to prevent fuel starvation and enhance performance for whatever your fuel cell needs are. Other features include flush-mount aircraft-type lids, two -8 AN outlets, and one -8 AN vent fitting.
( 42 )
$145.99
—
$233.99
"Driven to Excellence", RCI has taken great pride in building the finest high-quality products at an affordable price, while maintaining a high safety standard for all types of racing for over 30 years. RCI uses 5052 aircraft aluminum alloy and TIG welding to make their aluminum racing fuel cells lightweight and strong. Ranging in sizes from 1 to 20 gallons, they feature 12-bolt heavy-duty aircraft-style flush mount lid assemblies, safety foam, fuel pickups, return, and rollover vent. RCI aluminum racing cells are available in natural aluminum color or powdercoated red, blue, or black.
( 62 )
$158.99
—
$284.99
Are you experiencing issues with your stock gas tank, such as a strong fuel odor, a slow leak, or any other problem? CA offers replacement gas tank kits for classic muscle cars. Each direct-fit assembly consists of a steel fuel tank (in the specific gallon capacity for your application), a drain plug, filler neck, hose, gasket, hose clamps, and the required fuel tank mounting hardware. Order the model designed for your '60s era Mustang.
( 5 )
$244.99
—
$272.92
Jaz Products drag race fuel cells feature a seamless, rotomolded, cross-linked polyethylene outer shell. They're available with or without aviation safety foam. These Jaz Products drag race fuel cells have a flush-mount, aircraft-style cap assembly and tapered sump in the rear for better fuel pickup. These fuel cells also feature 360 degree mounting strap recesses.
( 36 )
$131.99
—
$276.99
Tanks Inc. offers a wide range of street rod gas tanks and related accessories—including Shelby Cobra polished aluminum filler neck and fuel caps. These stylish parts feature a flip-open top with roller latch. Shelby Cobras are considered by many to be the most iconic American sports car in history. When restoring or replacing components, use factory models designed to fit and perform properly. Additional details: * Vented * Connects with a 2 in. I.D. hose * 5 1/8 in. O.D. mounting flange * Mounts with six screws on a 4 5/8 in. bolt circle diameter * Stainless steel mounting hardware and gasket included
( 1 )
$144.99
Positioned beneath the chassis, your fuel tank is vulnerable to weather, rust, leaks, and other potential damage. And with the price of a fill-up, you sure don't wanna be dripping gas on the driveway or the open road. Yes, there are many reasons to consider a replacement fuel tank from Dorman. Tested to meet durability standards, these direct-fit units are corrosion-resistant. Hundreds of models are in stock for a wide range of makes and models. The fuel tanks are available in various size capacities, finishes, and configurations; some include a filler neck, baffled sump, and/or lock ring set. Find the Dorman replacement tank that matches your vehicle specs for a factory-like fit and installation.
( 430 )
$91.99
—
$292.99
"Driven to Excellence", RCI has taken great pride in building the finest high-quality products at an affordable price, while maintaining a high safety standard for all types of racing for over 30 years. RCI uses 5052 aircraft aluminum alloy and TIG welding to make their aluminum street fuel cells lightweight and strong. Ranging in sizes from 12 to 19 gallons, they feature 12-bolt heavy-duty remote fill necks for use with standard 1 3/4 in. hose, a fuel pickup, return, rollover vent, and a sending unit. A billet aluminum cap is included for non-remote use. RCI aluminum street cells are available in natural aluminum color or powdercoated red, blue, or black.
( 130 )
$213.99
—
$278.99
Rhodes Race Cars flat bottom fuel cells are custom-built from .100 thick, 5051 aircraft aluminum alloy to ensure the best quality material and craftsmanship go into every cell produced. The cells feature an aircraft-style flush mount cap, plus AN fittings for the pick-up, vent, and return fittings. Suitable for street, strip, drag racing, or off-road trucks, flat bottom fuel cells are available in a variety of sizes and tank capacities, with or without sending units.
( 11 )
$209.95
—
$269.95
Need a fuel tank? There's only one place to get exactly what you need: Tanks Inc.! They offer a large variety of polyethylene, stainless steel, mild steel, and alloy coated steel reproduction gas tanks in applications set up to fuel many popular vehicles and even a few that are not-so-popular. So, whatever you desire to fit a tank to, be it a street rod, muscle car, classic truck, or that special ride, Tanks Inc. fuel tanks deliver the best quality and fit, blended with their knowledge and expertise, to power your project successfully. NOTE: These are standard stock replacement tanks for carbureted engine applications. If you have retrofitted your engine for electronic fuel injection, please see the Tanks Inc. EFI-Ready Fuel Tank options.
( 389 )
$159.99
—
$274.99
Rhodes Race Cars custom fuel cells are small and ideal for Circle Track, off-road truck, and road and drag race applications. These cells are built from .100 in. thick 5051 aircraft aluminum alloy to ensure the best quality material and craftsmanship. They feature an aircraft-style flush-mount cap, plus AN fittings for the pick-up, vent, and return fittings.
( 8 )
$129.95
—
$234.95
OER offers gas tanks for countless applications from the 1940s and up. Leaky or rusted fuel tanks are both costly and dangerous. These replacements are careful reproductions of the originals, in a variety of sizes, configurations, materials and finishes. All OER gas tanks are meticulously constructed to factory specifications for a proper fit for your specific vehicle. Additional details: * Includes lock ring and O-ring gasket for the fuel sender * Does not include fuel sender (sold separately) * Zinc coated steel tanks offer standard corrosion resistance * OE-quality ni-terne coated steel fuel tanks provide better corrosion resistance * Polished stainless steel fuel tanks offer both show-quality appearance and superior corrosion resistance
( 56 )
$105.99
—
$264.99
Our Drag Race cells have features like seamless polyethylene construction for outstanding impact resistance, aviation foam filling to prevent fuel slosh and aeration, and a one-way flapper valve vent in the cap, to allow air to displace fuel as it's being used. Ideal for drag racing, they include a 2 in. deep sump in the rear for better fuel pickup during launches, two -8 AN outlets, a -6 AN vent fitting, a flush mount aircraft-type cap, and 360 degree mounting strap recesses. And best of all, you get all of this for a very affordable price.
( 134 )
$215.99
—
$234.99
"Driven to Excellence", RCI has taken great pride in building the finest high-quality products at an affordable price, while maintaining a high safety standard for all types of racing for over 30 years. RCI Standard Circle Track fuel cells are available in two versions, several sizes, and either side-to-side or front-to-back styles. All Standard complete cells offer spot-welded steel construction with cross-linked, high-strength polyethylene bladders and the cans are powdercoated in red, black, or white. Each features a 2.5 in. lid assembly with flapper, fuel pickup in the right rear, and vent. Ranging in sizes from 3 to 32 gallon, the 22 gallon and larger cells include fuel return and are available in SFI-approved models (black only) with safety foam.
( 21 )
$233.99
—
$261.99
Jaz Products maintains its own factory, equipment, and molds, producing the highest quality fuel cells, rotationally molded in seamless cross-linked polyethylene. These Econo Rail fuel cells feature a unique shape that's designed for dragsters. They are available with or without aviation safety foam and feature a flush-mount, aircraft-style cap assembly.
( 2 )
$186.99
—
$254.99
ACDelco GM Genuine Parts fuel vapor canisters are specifically made for the applications noted and will drop right into the stock holder. These emission control components are GM-recommended replacements for your vehicle's original part. They capture and store evaporating fuel vapors from the fuel tank to be drawn into the intake manifold during engine operation. They are manufactured to provide you with the same performance, durability and service life you expect from General Motors.
( 12 )
$102.99
—
$249.99
Cap off your fuel cell with these Earl's Performance assemblies. A great alternative to your boring stock cap, Earl's are CNC-machined from 6061-T6 billet aluminum. They are then coated with a bright black anodize that adds great looks and corrosion protection. They feature an easy-to-grip, screw-on design with O-ring, and include stainless steel hardware. Finishing these fuel cell caps is a laser-etched Earl's logo, letting everyone know they are quality performance items.
( 25 )
$139.95
—
$162.95
Omix-Ada fuel tanks are available for a wide variety of Jeep applications. These high-quality restoration fuel tanks are direct replacements for your Jeep's original components to ensure a perfect fit and proper operation.
( 13 )
$142.99
—
$249.99
Modal Header
Truck / SUV
Jeep®
Gifts, Clothing, & More
Restoration
Stock Replacement
Late Model Muscle
Tools
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
