Filters
Airflow Research developed these 185cc SBF Enforcer cylinder heads for maximum small block Ford performance. They're manufactured from tough but lightweight A356 aluminum and feature 185cc intake runners and 64cc combustion chambers. Enforcer heads feature a 0.325 in. deck, stock valve locations, and are designed for blocks with a minimum bore of 4.000 in. The heads are available bare or fully assembled with stud mount rocker mounting.
( 21 )
$767.55
AFR's 335cc BBC Enforcer cylinder heads feature their Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. These budget-friendly heads are perfect for your 509 to 540 cu.in. operating below 6,500 rpm. They come fully assembled with the identical components found in AFR's higher end CNC-ported cylinder heads—such as ARP rockers studs, PAC Racing springs, Viton® valve seals, AFR adjustable guide plates, machined bead valve locks (not stamped), hardened spring seats, and AFR's one-piece 8mm 21 4N stainless steel valves. Order the cylinder heads recommended for your year/make and engine application.
( 4 )
$1,023.75
AFR 210cc LS1/LS2/LS6 Enforcer cylinder heads are available in standard and small bore applications. They feature Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. The budget-friendly heads are perfect for your OEM engine operating below 6,300 rpm. Fully assembled Enforcer models include the identical components found in AFR's higher end CNC-ported cylinder heads—such as PAC Racing springs, Viton® valve seals, machined bead valve locks (not stamped), hardened spring seats, and one-piece 8mm 21 4N stainless steel valves. The heads are available without any parts for the DIY. Sold as a single piece, two heads are required per engine.
( 1 )
$780.15
Trick Flow® PowerPort® 190 cylinder heads for small block Mopar engines are made from A356-T61 aluminum because it's much lighter but every bit as strong as cast iron. The intake runners have been enhanced to increase airflow, and both intake and exhaust runners feature Trick Flow's® special CNC Street Ported treatment that combines premium-quality CNC machining with a standard resolution finish that's perfect for making more power. That's not all! Newly designed rocker arm shaft mounting bosses are stronger than the OE design, and larger diameter pushrod holes have been incorporated to accommodate 3/8 in. pushrods for use with flat tappet and hydraulic roller camshafts. Bronze alloy valve guides, ductile iron valve seats, and multi-angle valve seats further increase performance and durability. Assembled cylinder heads include premium 11/32 in. stainless steel valves, Trick Flow by PAC Racing® valve springs, steel valve stem locks—and have chromoly and titanium retainer options. The heads fit all non-emissions 318, 340, and 360 engines found in many Chrysler vehicles from 1967-2003. You read that right: these heads fit both LA and Magnum-series engines, giving builders a truly "best of both worlds" scenario. That means Magnum builders can use readily available LA engine parts such as intake manifolds and valve covers. PowerPort® 190 cylinder heads are available fully assembled or as bare castings; sold separately. Order the model recommended for your year/make and engine application.
( 15 )
$938.99
—
$1,157.99
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 159 )
$870.50
—
$1,035.50
Summit Racing™ Pro LS forged steel crankshafts deliver industry-leading fit, finish, and durability at an affordable price. Order the model recommended for your year/make and engine application. Check out the long list of premium features: * 4340 forged steel * Tested to over 1,200 hp in boosted applications * Core hardened to optimum strength, then tempered to remove stresses * Nitride hardened, which results in less distortion, excellent case depth, and more fatigue life * Profiled counterweights reduce windage * Precision stroke and indexing * Lightening holes are drilled in the rod journals for quicker engine acceleration * Gun-drilled Main Journals for quicker engine acceleration * Each crank is magnetic particle tested to ensure it's free of flaws * Large radius fillets for increased strength, narrowed rod bearings for reduced friction * Straight shot oiling for maximum lubrication just prior to maximum load angle * Maximum journal tolerances of +/- .0001 in. ensure consistent bearing clearance * Micro-polished journals with chamfered oil holes for maximum durability and bearing life * Optimized counterweight placement for reduced twisting at high RPM and ease of balancing * High-quality reluctor rings are installed with precision fixturing * Extra 3/16 in. front keyway for blower cars
( 12 )
$839.99
Summit Racing™ precision cast cylinder heads are made from tough A-356 aluminum alloy and feature Permanent Mold "As-Cast" technology. Port accuracy is unrivaled--meaning CNC porting is not required to provide superior flow. The result is CNC-ported performance at a fraction of the price! We start with precision CNC-finished faces and bolt holes for accuracy and fitment. American craftsmen expertly size and install the manganese bronze valve guides and interlocking ductile iron seats before finishing with a competition-grade valve job. From there, the decks are given a final pass for superior finish. They are finish-assembled in the USA with top-quality components like PAC Racing springs, fasteners, one-piece 21 4N stainless valves, machined locks, Viton® seals and chromoly steel retainers. The final result is the performance you want and Summit Racing™ quality you TRUST!
( 11 )
$841.99
All the quality, reliability, and workmanship you have relied upon for years from the Compstar lineup is taken to the Xtreme--Callies Compstar Xtreme connecting rods. Specifically designed for power adder and diesel applications, these rods utilize the same proven 4340 material and ARP 2000 or L19 fasteners. Strength was added by thickening up the flanges of the H-beam and a reduced depth-of-cut towards the center of each rod, then non-essential weight is taken out of the beam to help keep the overall weight of these Xtreme rods in check. Choose a set for your high output, boosted application.
Not Yet Reviewed
$976.00
—
$1,064.00
No camshaft swap is complete without a new set of lifters. Treat your engine to the "good stuff" with new Trick Flow® hydraulic lifters or lash adjusters. Featuring durable hardened steel construction, these lifters and adjusters are a must when installing new cams—and are perfect replacements for worn or ticking lifters in used engines. The retro-fit roller lifters with vertical-style link bars are designed for a roller cam conversion in engines originally equipped with a hydraulic flat tappet cam. Overhead valve engines may require different length pushrods. The sets are available in a variety of fitment options for applications from 1955 and up.
( 44 )
$755.99
If you plan on adding performance to your street machine or building a serious racer, Harland Sharp Original Series roller rockers are recommended for you. Using the very latest manufacturing technology and only the very finest materials, the Original Series rockers incorporate race-proven enhancements, such as improved strength, performance, and lighter weight over conventional rocker arm designs. Don't settle for any old rocker arm--go with a true leader in roller rocker arm technology--Harland Sharp.
( 174 )
$754.99
—
$999.99
Don't compromise your engine's performance or risk the well-being of your valvetrain with inferior lifters! Ensure consistent valve timing, efficient valvetrain operation, and maximum power with Isky Silver Series HPx needle-bearing hydraulic roller lifters. Isky Racing Cams uses advanced design and precision engineering to provide the quality that your ride deserves—find out for yourself when your order the Isky Silver Series HPX hydraulic roller lifters designed to fit your application.
( 9 )
$831.99
—
$948.99
No longer will fans of the small block Chevy have to choose between vintage looks or modern cylinder head power—Trick Flow® DHC™ 175 cylinder heads give you both! Made from premium grade, lightweight A356-T61 aluminum, DHC™ 175 heads feature the exterior styling and straight spark plug holes that deliver the nostalgic appearance of the original factory performance 186, 291,461,462 "double hump" or "camel back" castings that customers want. To keep with the vintage design, the heads are available with 69' later or without 68' earlier accessory bolt holes cast into them. 60cc CNC-profiled combustion chambers combined with a state of the art valve job and CNC blended bowl work under the valves and small cross-section intake runners promote low-rpm torque increases and boost high-rpm horsepower. The runners are finished with Trick Flow's® superior Fast As Cast® process that precisely duplicates the runner profile and performance levels of fully CNC-ported heads without the added machining cost. Ductile iron valve seats for use with unleaded fuel, stainless steel valves, bronze alloy valve guides, multi-angle valve seat machining, and decks and walls cast extra thick for increased casting strength and to provide extra room for porting round out the features. Trick Flow® DHC™ 175 cylinder heads are available fully assembled or as bare castings. Sold individually.
( 18 )
$787.99
—
$815.99
Get more for your dollar with Howards Cams Retro-Fit hydraulic roller camshaft and lifter kits. You'll get more lift and power for less money with these street performance grinds. They're perfect for those wanting to upgrade to hydraulic roller cams. Howards manufactures their cams using the highest grade race-quality cores and precision-grinds their cams to provide the quality and performance that you want at a reasonable price. They've matched these hydraulic cams with a perfect set of their premium lifters. Overhaul your valvetrain for mild to wild street performance with Howards Cams Retro-Fit hydraulic roller camshaft and lifter kits.
( 64 )
$986.99
—
$1,094.99
These March Performance Sport Track Chevy serpentine pulley kits are designed for the budget-minded engine builder with the same quality and innovation as the normal March Performance kits. They are designed to mount the air conditioning low and on the passenger side for a compact and clean appearance. The serpentine pulley kits will eliminate belt throwing and offer no-slip operation. These March Performance Sport Track Chevy serpentine pulley kits are manufactured from 6061-T6 billet aluminum and are available in black or silver powdercoated finishes.
( 55 )
$779.99
—
$1,044.99
Musclecar sound is back and nastier than ever with these Thumpr retrofit hydraulic roller cam and lifter kits from COMP Cams! These cams feature a thumping high performance idle and provide significant horsepower and torque increases. Specially engineered profiles are offered for each unique engine, providing the perfect combination of an early intake valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap to maximize your engine's nasty-idling characteristics without negatively impacting streetability. These kits include high-quality matched lifters for unbeatable performance, durability, and ease of installation.
( 21 )
$825.95
—
$1,123.95
Crower cutaway severe-duty roller lifters are a must for high-pressure, high engine rpm applications. These mechanical roller lifters feature a special alloy body, a lightweight design, and a heavy-duty blade that has been moved up to fit late model blocks. They are available in standard or offset sizes. Order the model designed for your specific application.
( 14 )
$758.99
—
$1,119.99
On Sale
Summit Racing™ forged crankshafts offer maximum strength and the best value for your dollar! Our crankshafts are non-twist forged from certified 4340 steel. They are put through several stages of heat-treatment, and then stress-relieved and shot-peened to provide the strength and reliability you demand for your high performance application. Each journal is micro-polished and a .125 in. radius is used for increased strength. Summit Racing™ forged crankshafts help you get the most in value and performance.
( 9 )
$892.99
$757.99
—
$997.99
Don't trust your engine investment to just any no-name rocker manufacturer. Harland Sharp heavy-duty roller rockers are specifically designed for the heavy spring pressure and high-lift geometry of highly modified engines. They're also engineered with wider bodies, resulting in increased rocker strength and longevity. So, when your engine requires extra durability, use Harland Sharp heavy-duty roller rockers.
( 58 )
$794.99
—
$1,037.99
Chevrolet Performance LSA cylinder heads offer high-strength cast aluminum casting for your supercharged application with premium steel intake and Inconel exhaust valves. Offering high strength, high flow, and high performance, LSA assembled cylinder heads provide an advantage to doing a build your way. Chevrolet Performance delivers those power-building attributes to you with a range of production-style aluminum heads.
( 2 )
$861.99
Big combustion chambers plus larger runners equal massive power! Trick Flow GenX® 195 cylinder heads are designed for GM LT1 engines with superchargers or turbochargers. They retain the stock LT1's 23 degree valve angles—and feature large, standard cast 62cc combustion chambers to reduce compression. Big 195cc intake/72cc exhaust Fast As Cast® runners substantially increase horsepower and torque in boosted applications. Trick Flow® GenX 195 heads accept all stock sensors and fittings, and are available fully assembled or as bare castings. Sold individually.
( 2 )
$849.99
Cam Motion lifters are available to fit your desired level of performance and budget. From economical stock replacements to their High Performance, Racing, and Premium lines of lifters, Cam Motion covers many applications. Their Premium hydraulic roller lifters feature cold-forged steel construction, precision-ground needle roller bearings and extra-long pistons, precision oil metering, and high-flow, quick-reacting check valves. Cam Motion lifters are available in factory tray/retainer-styles and tie bar-styles.
( 7 )
$766.32
—
$1,052.19
On Sale
Better by design, Callies Compstar connecting rods offer high performance and a trouble-free engine build. Concerns about out-of-round, big-end bore sizing, repeatability, time-saving details, and upgrade costs are a thing of the past. Their forged 4340 steel rods are put through a lengthy stress-relief process and burnishing of threads and bolt spot faces to ensure dimensional repeatability, no matter how many times rods are torn down and reassembled. Pin bushings are chamfered and honed, parting line edges are generously chamfered, and bearing locating tab slots are deburred, all in an effort to save you time and trouble. ARP 2000 bolts and stroker clearances are standard with Compstar rods. Choose either their original H-beam design or heavy-duty I-beam designed rods. For high performance use right out of the box, plus value and peace of mind, try Callies Compstar connecting rods.
( 18 )
$1,032.00
$768.00
—
$1,044.00
Eagle forged 4340 steel crankshafts are great for high performance applications. They feature non-twist forging, undergo a multi-stage heat-treatment process, and are stress-relieved and shot-peened. These cranks are X-rayed, magnafluxed, and sonic-tested, so you know you're getting a top-quality piece. Each crankshaft has chamfered oil holes for improved oiling, a .125 in. radius on rod and main journals for increased strength, and the journals are precision-ground and micro-polished to less than 5 R.A. A target bob weight of +/- 2 percent greatly reduces balancing time. Many options are available; order the model recommended for your year/make and engine application.
( 50 )
$774.99
—
$1,099.99
COMP Cams introduces another industry first with their Max-Lift BSR shaft rocker systems, a bolt-in bushed shaft rocker system that increases valve train stiffness helping your engine achieve higher levels of performance. By tying all eight rocker arms together on a single shaft that fits in the stock rocker stand, COMP Cams has found a way to improve valve train dynamics, increase valve train stiffness and reduce deflection under extreme loads. The increased valve train stiffness created the BSR rocker system allows your existing cam to act like a larger camshaft by transferring more of the motion to the valve or the use of more aggressive, higher lift cams without losing control of the valve train. Take complete control of your valves with the COMP Cams Max-Lift BSR shaft rocker system.
( 2 )
$840.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
