Filters
Summit Racing™ valve cover grommets are designed to control oil leakage into breather caps and keep oil from getting all over your valve covers. The baffled grommets help to eliminate oil blowby, as well. These inexpensive replacements are made to fit most stamped or diecast valve covers. Order the size and style preferred for your application.
( 148 )
$3.99
—
$9.99
Summit Racing™ offers valve cover breathers in a variety of styles, sizes, materials, and finishes. They're designed to fit most stock or aftermarket valve covers. Add a dash of flash under the hood; top off your valve covers with snazzy breathers from Summit Racing™.
( 120 )
$5.99
—
$12.99
ACDelco Gold PCV valves are high-quality aftermarket components. The PCV (positive crankcase ventilation) valve controls the volume of crankcase vapors that are drawn into the intake manifold. A restrictive PCV valve can cause oil leaks or increase oil consumption. These replacements have been manufactured to meet or exceed your expectations for fit and performance. Order the model recommended for your vehicle.
( 34 )
$1.99
—
$8.99
Our Summit Racing™ valve cover hold-down tabs are designed to spread the fastener load over a larger area of your valve cover flange. This minimizes distortion and decreases the possibility of oil leaks.
( 39 )
$7.99
—
$9.99
Standard Motor Products replacement PCV valves are emissions-control devices that route unburned crankcase blowby gases back into the intake manifold where they can be re-burned. By totally eliminating crankcase emissions, the constant recirculation of air through the crankcase helps to remove moisture, which would otherwise cause sludge to form. Standard Motor Products replacement PCV valves will extend the life of the oil and the engine.
( 50 )
$1.99
—
$11.99
Did you lose or damage a valve cover bolt? Chevrolet Performance has you covered with these replacement valve cover bolts. They are just like your factory originals, so you have no worries about fit or appearance--everything will be just how the engineers at Chevy intended. Chevrolet offers these replacement valve cover bolts for most of their popular engines, so finding the right one will be easy.
( 15 )
$5.99
Dress up your engine compartment while keeping oil in its place and the dirt at bay with Summit Racing™ valve cover oil fill caps. They're manufactured from high-quality material, providing a proper fit and seal to prevent oil loss. These round, steel caps are available to fit a variety of applications, including GM, Mopar, Ford, AMC, Jeep, and other make/model vehicles. Whatever your part needs, chances are Summit Racing™ has it!
( 34 )
$4.99
Made from high-quality black rubber, these Proform grommet sets will fit valve covers with 1.22 in. holes. They seal breather caps, oil filler caps, and PCV valves to your valve covers to prevent vacuum leaks and the loss of oil. These kits include two grommets--one for push-in air breathers, and one for PCV valves.
( 22 )
$4.99
—
$7.95
Allstar Performance valve cover breathers are offered in shielded and non-shielded versions. These aluminum breathers can be used on valve covers with breather tubes.
( 15 )
$10.99
On Sale
Mr. Gasket flat black valve cover breathers add a stealth appearance to your engine compartment. They are available with or without a PCV fitting and offer a fast and easy way to customize your under-the-hood look.
( 17 )
$9.82
Scott Drake valve cover grommets offer a good seal for your classic. They are designed for your valve covers, when installing oil caps or a PCV valve. The grommets are available in a variety of styles and sizes. Order the model recommended for your application.
( 35 )
$8.23
Control what your PCV system allows back into your highly tuned combustion chamber with Keyser Manufacturing valve cover breathers. They prevent less-than combustible byproducts from being recycled into the combustion chamber, causing a buildup of crud on your valves and a less-than-optimal mixture in your combustion chamber. These breathers allow vapors to escape while catching any sludge, preventing it from leaking over your engine block.
( 6 )
$8.99
—
$10.99
Moroso PCV grommets with integral baffles are designed for those using extra-tall valve covers without the integral oil control baffles. The special oil-resistant design keeps oil out of the PCV valve. They'll work with all GM PCV valves and will fit any valve cover with a 1.22 in. diameter hole.
( 20 )
$9.99
Improve your vehicle's performance by replacing your clogged PCV valves with new ones from Beck/Arnley. Clogged PCV valves mean poor performance from your car--poor idling, poor gas mileage, and no power. Beck/Arnley quality replacements provide a perfect fit every time for your vehicle. Check and clean your PCV valves periodically, and when you need to replace, choose Beck/Arnley.
( 24 )
$3.99
—
$11.99
Edelbrock oil fill hole plugs are designed to plug the oil fill hole on any of Edelbrock's Signature series or similarly designed valve covers with a 1.25 in. hole. They're made of high-quality material with chrome finish and recessed Edelbrock script logo.
( 19 )
$14.95
Allstar Performance breather socks help catch residual oil discharged from the engine through valve cover breathers. They offer a practical alternative to wrapping dirty shop rags around valve cover breathers! The socks fit over standard 3 in. diameter, 2 1/2 in. tall valve cover breathers and are easily cleaned with a mild detergent. They're available for both standard and shielded breather models.
( 6 )
$7.99
—
$9.99
No more struggling to replace the grommet of your valve cover bolt. BTR valve cover fasteners are direct replacements of the stock parts, and they include the bolt and grommet. Secure your valve covers the hassle-free way with BTR replacement valve cover bolts.
Not Yet Reviewed
$4.99
Moroso breather grommets with integral baffles are designed for use with valve covers that do not have an oil control baffle system. They are made from oil-resistant rubber and will fit into any valve cover with a 1.22 in. diameter hole, replacing the OEM-style grommets. The built-in baffles provide oil control. Note: These breather grommets will not clear stud girdles.
( 28 )
$10.99
Edelbrock PCV valve cover grommets are available for a variety of applications, including dozens of Jeep and American Motors vehicles from the 1960s and '70s. These rubber accessories are ideal and affordable components to complement your V8 intake manifold.
( 6 )
$13.95
Despite their importance, valve cover grommets are often overlooked--and if they're not replaced in time, leaks can easily occur. Fel-Pro offers a range of quality replacement sealing solutions, including these valve cover grommets. They provide reliable, leak-free sealing to help keep your vehicle operating at peak efficiency. The Fel-Pro grommets meet or exceed OE specifications and are validated to provide accurate fit, form, and function.
( 11 )
$3.99
—
$13.99
Use Mr. Gasket valve cover grommets to ensure a positive oil seal. These grommets are made from neoprene and are available to fit most stamped or die-cast valve covers.
( 28 )
$6.95
—
$9.61
MotoRad crankcase breather caps provide the oil circulation and air ventilation that your engine needs to run properly. Made from heavy-duty steel, MotoRad caps perform well under pressure. Many of these direct fit, high-quality crankcase breather caps are given a zinc plated finish for optimal rust resistance. Get replacements that perform and fit like the originals--MotoRad crankcase breather caps.
( 1 )
$4.99
—
$9.99
Spectre valve cover oil fill caps are designed to be pushed into your standard 1.25 in. valve cover breather hole. They include a rubber grommet and can be installed in just seconds. The caps are available in your choice of steel or aluminum, so you can match up what's best for your engine style.
( 28 )
$8.99
—
$9.99
On Sale
Add a little pizzazz to your engine with Mr. Gasket chrome valve cover breathers. These custom chrome breathers keep your crankcase properly vented and add a little shine under the hood. Mr. Gasket valve cover breathers are available in push-on or push-in styles.
( 46 )
$11.95
$8.96
—
$10.55
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
