Filters
The hot new small block V8 in the GM lineup is the hyper-aggressive LS3 6.2L 376 c.i.d. 495 hp engine assembly from Chevrolet Performance. It offers a high-revving 376 c.i.d. combination that represents generations of small block V8 development and engineering. Not only is the LS3 an amazing engine in its stock configuration, but with those high-flowing rectangular port cylinder heads, the LS3 is loaded with potential. To tap into this, the engineers at GM Performance Parts offer you the LS376/480—an LS3 with an upgraded camshaft that boosts power by a whopping 50 hp! The LS376/480 comes with the same great features as the LS3 crate engine. The bottom-end includes a 6-bolt aluminum block, nodular crank, high performance rods, and 10.7:1 pistons. The heads are high-flowing rectangular-port L92 units that have been upgraded with high-revving, hollow-stem valves. The same EFI intake manifold feeds the hungry engine, while 1.7:1 roller rockers work with the upgraded camshaft. The GM Performance Parts engineers picked the LS Hot Cam (P/N 88958733) to take the LS3 to the next level. This cam specs out with .525 in. intake and exhaust valve lift. Duration (at .050 in.) is 219 degrees intake and 228 degrees exhaust, which allows for a dramatic increase in power. The engine will idle and cruise just like an LS3, but the power increase is there whenever you need it. A 14 in. automatic flexplate is included. Specifications: * Engine type: LS Series Gen IV small block V8 * 495 hp at 6,200 rpm, 473 lbs.-ft. torque at 5,000 rpm * Displacement: 376 cubic inch (6.2L) * Bore x Stroke (in.): 4.06 x 3.62 (103.25 x 92mm) * Block: Cast-aluminum with 6-bolt, cross-bolted main caps * Crankshaft: Nodular iron * Connecting rods: Powdered metal * Pistons: Hypereutectic aluminum * Camshaft type: Hydraulic roller * Valve lift: .525 in. intake / .525 in. exhaust * Camshaft duration (at .050 in): 219 degrees intake / 228 degrees exhaust * Cylinder heads: Aluminum L92 style port; as cast with 68cc chambers * Valve size: 2.165 int / 1.59 exhaust * Compression ratio: 10.7:1 * Rocker arms: Investment-cast, roller trunnion * Rocker arm ratio: 1.7:1 * Recommended fuel: 92 octane * Maximum recommended RPM: 6600 * Reluctor wheel: 58X * Balanced: Internal
Not Yet Reviewed
$10,763.71
Chevrolet Performance's ZZ632/1000 deluxe long block crate engines are their biggest and baddest big blocks! They start with a tall deck Sportsman Bowtie block and an all-forged roller assembly, then add a hydraulic roller camshaft and high-flow spread-port CNC-machined cylinder heads derived from Pro Stock racing technology. The RS-X design cylinder heads feature symmetrical ports to produce similar power from all eight cylinders. ZZ632 crate engines have a crank-trigger ignition system with coil-near-plug ignition coils mounted on a unique valley plate. Included is a pre-programmed, self-learning control system for precise fuel control and amazing output on premium pump gas. These big block engines reach peak power at 6,600 rpm and rev to a recommended maximum of 7,000 rpm. Technical specs: * Bore and stroke: 4.600 in. by 4.750 in. * Power is 1,004 hp at 6,600 rpm * Torque is 876 lbs.-ft. at 5,600 rpm * Cast iron block with 4-bolt mains * Forged 4340 steel crankshaft * Forged steel H-beam connecting rods * Forged aluminum 2618 alloy pistons * Aluminum high-rise single-plane intake manifold * Dominator 4500-style throttle body * 86 lb.-hr. fuel injectors * Billet steel hydraulic roller camshaft * Valve lift of 0.780 in. intake and 0.782 in. exhaust * Camshaft duration at 0.050 in. is 270 intake and 287 exhaust * Aluminum RS-X symmetrical spread-port cylinder heads with 70cc chambers * Titanium 2.450 in. intake/1.800 in. exhaust valves with a 5/16 in. stem * 58X reluctor crank-triggered, coil-near-plug ignition * Compression ratio of 12.0:1 * Forged aluminum shaft-mount roller rocker arms with 1.8:1 ratio * Aluminum water pump * Steel 8-quart oil pan * Recommended fuel: 93 octane or higher
( 1 )
$32,935.35
Chevrolet Performance 6.2L 376 C.I.D. 495 hp engine assemblies feature an impressive 495 hp at 5,570 rpm with 475 lb.-ft. of torque. The assemblies use a production bottom end and the race-tested LS "Hot" cam. With significantly more duration than the stock camshaft, the valves remain open longer allowing these engines to pull in increased amounts of clean air through the large rectangular ports. Specifications include: * Compression ratio of 10.7:1 * Recommended fuel is 92 octane * Cast aluminum block with 6-bolt cross-bolted main caps * Nodular iron crankshaft * Powdered metal connecting rods * Hypereutectic aluminum pistons * Steel hydraulic roller tappet camshaft * Valve lift of 0.525 in. for intake and exhaust * Duration at 0.050 in. is 219 degrees intake and 228 degrees exhaust * Lobe separation angle is 112 degrees * Combustion chamber volume is 68cc * Valve diameter is 2.165 in. for the intake and 1.590 in. for exhaust * Cast roller trunnion rocker arms with a 1.7:1 ratio * Internally balanced * 58x Gen IV reluctor wheel * Maximum recommended rpm is 6,600 * Recommended torque converter stall is 2,400-2,800 Engine includes: * Fully assembled long block * Oil pump, pick-up and oil pan * Harmonic balancer * Front timing cover * Oil filter and passenger side oil dipstick and tube
( 3 )
$7,423.35
Looking for more power for your ride? Want to drop your quarter mile times substantially? Does OEM reliability and parts interchangeability interest you? Well my friend, you've come to the right place. Why bother rebuilding your existing engine with old, used, and worn-out parts when you can step up to brand-new with these affordable crate engines from Chevrolet Performance. You read it right, these engines feature all-new components built and manufactured by the pros at GM.
( 2 )
$6,610.77
—
$8,971.76
Chevrolet Performance LS3 6.2L 376 c.i.d. engine assemblies use an impressive 10.7:1 compression ratio to put out 525 hp at 6,200 rpm and 486 lbs.-ft. of torque at 5,200 rpm. They feature a cast aluminum block with a nodular iron crankshaft, powdered metal connecting rods, and hypereutectic pistons. The steel hydraulic roller camshaft has a .525 in. intake and .525 in. exhaust valve lift, with a 226 degree intake and 236 degree exhaust valve duration at .050 in. cam lift. Assemblies also include: * Ignition coil packs * Spark plug wires * Spark plugs * Intake manifold * Fuel injectors * Throttle body * Exhaust manifolds * 14 in. flexplate * Front timing cover * Aluminum water pump * Harmonic balancer * Passenger side right hand dipstick and tube
Not Yet Reviewed
$11,289.50
Here, at last, is the king of all big block crate engines from Chevrolet Performance. These 502 cu. in. engines are available unassembled or fully assembled. Each version makes extensive use of aluminum to keep weight down—including aluminum heads, intake, water pump, and valve covers. Additionally, ZZ502 c.i.d. deluxe long block crate engines are full of heavy-duty parts, such as: forged aluminum pistons, forged shot-peened steel connecting rods with 7/16 in. bolts, forged steel crankshaft, 14 in. automatic transmission flexplate, 4-bolt main blocks, stainless steel valves, 6 qt. oil pan, and windage trays. The complete Chevrolet Performance engine kits come with Gen 6 four-bolt main blocks with one-piece rear main seals. Hydraulic roller camshaft specs are: .527 in. intake lift, .544 in. exhaust lift; the duration at .050 in. for intake is 224, and 234 for exhaust with a 112-degree lobe centerline. Other features include a single roller timing chain, aluminum large oval port, and 110cc combustion chambered heads. Intake runner volume is 290cc; stainless steel valves are installed, with 2.25 in. intake side and 1.88 in. on the exhaust side. Valve springs are rated at 140 lbs. closed and 368 lbs. open, good for up to .680 in. lift. These heads have exhaust crossovers. Aluminum high-rise dual-plane square bore bolt pattern intake manifolds and an 870 cfm carburetor are also included.
( 3 )
$12,993.69
Chevrolet Performance has recreated the classic L88 Big Block combination in the ZZ427/480 long block crate engine. Rated at 480 hp, it features an iron block, forged steel crankshaft, and high-flow aluminum cylinder heads. An upgraded hydraulic roller camshaft improves drivability and rpm range, while lower 10.1:1 compression means you can enjoy the power on pump gas, too. The ZZ427 comes complete with: high-flow oval port heads, a high-lift camshaft, aluminum intake manifold, 770 cfm Holley carburetor, an HEI distributor, aluminum water pump, balancer, spark plug wires, and a 14 in. flexplate. If you're looking for a modern version of the classic L88, the Chevrolet Performance ZZ427/480 long block crate engine is the answer. Additional specs and features include: * 4.250 in. bore with 3.750 in stroke * Cast iron block with 4-bolt main caps * Forged steel crankshaft * Forged steel connecting rods * Forged aluminum pistons * Hydraulic roller camshaft: - Valve lift .527 in. intake/.544 in. exhaust - Duration (.050 in) 224 intake/ 234 exhaust * Aluminum oval port heads with 110cc chambers * 2.190 in. intake/1.880 in. exhaust valves * 10.1:1 compression ratio * Aluminum 1.7:1 ratio roller rocker arms * HEI distributor * 770 cfm carburetor * Aluminum short water pump * Ignition timing base 10 degrees BTDC, 36 degrees total * 6,400 maximum recommended rpm
( 5 )
$14,436.01
Chevrolet Performance 7.0L 427 c.i.d. LS7 long block crate engines feature a unique big-bore cylinder block that is anchored with a forged crankshaft, lightweight titanium connecting rods, and hypereutectic pistons with coated skirts. Bolted on top of that is a pair of CNC-ported cylinder heads with 2.200 in. titanium intake valves and 1.610 in. sodium-filled exhaust valves. The Chevrolet Performance 7.0L 427 c.i.d. LS7 long block crate engines also include: * Dry sump Corvette oil pan * Front timing cover * Harmonic balancer
Not Yet Reviewed
$18,499.99
Chevrolet Performance LSX 454 long block crate engines are built with an all-forged, super-tough rotating assembly and feature a pair of new deep-breathing LSX 6-bolt cylinder heads. They also come dressed with great looking, all-new orange powdercoated valve covers with an engraved LSX 454 logo. With a carburetor and high-flow Chevrolet Performance intake manifold (sold separately), these engines are good for about 627 hp and 586 lbs.-ft. of torque. Due to the number of application variations, the LSX 454 crate engines do not include an oil pan, and the valve covers do not include provisions for mounting the ignition coil brackets. Other specifications include: * 4.185 in. bore * 4.125 in. stroke * Cast iron LSX Series block with cross-bolted 6-bolt main caps * Forged steel crankshaft * Forged steel connecting rods * Forged aluminum 11.0:1 compression pistons * Hydraulic roller camshaft * 0.635 in. lift intake/0.635 in. lift exhaust, 236 intake/246 exhaust duration at .050 in. lift * Aluminum LSX-LS7 cylinder heads with 70cc chambers * 1.8:1 aluminum roller rocker arms * 58-tooth reluctor wheel
( 1 )
$14,745.07
Chevrolet Performance 5.7L 350 C.I.D L05 Gen I 210 HP truck crate engines deliver performance and value. These long blocks start with a precisely CNC-machined 4-bolt main block, graphite coated hypereutectic pistons, and a flat-tappet hydraulic camshaft. Then they're topped with cast iron cylinder heads designed to be extremely durable while still providing good airflow through the engine. All Chevrolet Performance 350 L05 crate engines comply with an 18-step quality process, then get torque-to-turn, compression, and oil pressure-tested at the end of the line. More product features, items, and specs include: * Roller camshaft ready * Mechanical fuel pump capable * Cylinders honed on a computer-controlled machine * Forged steel crankshaft * One-piece rear seal * Powdered metal connecting rods * Silent link-type timing chain * New valve covers, oil pan, timing cover, and harmonic balancer for fewer labor hours at your installer * 210 hp at 4,000 rpm * 300 lbs.-ft. torque at 2,800 rpm * 9.4 to 1 compression ratio * Camshaft with 165/174 duration at 0.050, 0.382 In./0.402 ex. lift * 1.94 in. intake/1.50 in. exhaust valves * Center bolt cylinder heads (65.3cc chambers)
( 1 )
$4,729.99
Chevrolet Performance designed SP350/357 Deluxe crate engines as affordable performers to match just about any budget. Better still, they use stronger components and modern technology to make them a better alternative to rebuilding. Based on the value-driven 350 HO crate engine, their engineers swapped the flat-tappet camshaft for a hydraulic roller and added the latest small block intake manifold design. Together, they help build more power across the rpm band. These SP350/357 motors leverage the strength of a strong rotating assembly secured in a brand-new block with 4-bolt mains and economical Vortec iron cylinder heads to offer years of high-performance excitement at an excellent value. For power, durability, and affordability in the classic Chevy muscle motor, order your own Chevrolet Performance SP350/357 deluxe crate engine! SP350/357 Deluxe packages include: * Intake manifold * Distributor * Damper * 12.750 in. externally-balanced, 153-tooth, automatic transmission flexplate Installation notes: * Holley 4-barrel carb included but not installed on engine * Requires externally balanced flywheel for manual transmission * Requires fuel line from the fuel pump to carburetor * Designed for pre-1976 street vehicles or any off-road vehicle * Not intended for marine applications
( 2 )
$7,618.95
If you want big block power for your ride but want to have a say in the final product, Chevrolet Performance has the solution. Their 502 c.i.d. short blocks can be configured to deliver all of the muscle you want. The heart of these powerhouses is the same short block that GM uses for their 502 c.i.d., 502 hp bruiser—so you know they can crank out the power. Chevrolet starts with a Gen VI 4-bolt main block with a one-piece rear main seal and priority oiling for the main bearings. To that, they add: an externally balanced, forged crank that's shot-peened and magnafluxed; forged steel "dimple" connecting rods; forged aluminum pistons; a single-roller heavy-duty timing chain set; and a hydraulic roller camshaft. The cam has 0.527 in. of intake lift and 0.544 exhaust lift, with 110 degrees of lobe separation. Duration at 0.050 in. of lift is 224 degrees for the intakes, and 234 for the exhausts. These long blocks come complete with a powdercoated cast aluminum timing cover (will not accommodate double-row chains); aluminum cylinder heads and valve covers; a 6 qt. truck-type oil pan (will not fit Chevelle, Camaro, Nova, or Impala); a 14 in. flexplate; and an 8 in. harmonic balancer.
( 1 )
$7,334.37
You won't go broke finishing off your project car with this 350 Vortec c.i.d. HO turn-key crate engine from Chevrolet Performance! It's packed with all the features you need to get a reliable 330 hp and 380 lbs.-ft. of torque from a dependable, time-tested combination of GM Performance Parts. Of course, all the components used in this engine are brand new, not remanufactured parts like the competition is trying to sell you. Designed by GMPP's in-house engineers to give you maximum return for your hot rod dollar, the 350 HO Turn-Key is a great choice for your small-block crate engine needs. The 350 HO is based on a tough, Chevy 4-bolt block that holds a strong nodular iron crankshaft, good rods, and aluminum pistons. The high-lift camshaft gives the engine its own unique, aggressive idle. The cam is based on the same one found in 1965-67 Corvette 327 engines, but it has even more lift and duration. SPECIFICATIONS: * Power: 330 hp at 5000 rpm, 380 ft. lbs. of torque at 3800 rpm * Displacement: 350 c.i.d., 5.7L * Bore x Stroke: 4.00 in. x 3.48 in. * Compression Ratio: 9.0:1 * Recommended Fuel: 92 Octane * Block: Cast Iron, 1-piece rear seal, 4-bolt main caps * Crankshaft: Nodular Iron * Connecting Rods: Powdered Metal Steel * Pistons: Cast Aluminum * Camshaft: Hydraulic Flat Tappet * Cam Lift: .435 in. intake / .460 in. exhaust * Cam Duration at .050 in.: 212 deg. Intake / 222 deg. Exhaust * Lobe Separation: 112.5 degree * Cylinder Heads: Vortec Cast Iron, 3/8 in. pressed-in rocker studs * Combustion Chamber: 64cc * Valves: .194 in. Intake/ 1.50 in. Exhaust * Rocker Arms: Stamped Steel, 1.5:1 Ratio * Valve Springs: 10212811 * Balance: Internal * Maximum GM Recommended RPM: 5500 * Ignition Timing: Base 10 degrees BTDC, 32 degrees total Engine Includes: * Fully GM assembled long block * Chrome steel valve covers with Chevy Bowtie logo * Oil pump, pick-up and oil pan * Front timing cover * Passenger side RH oil dipstick and tube * Warranty: - General Motors limited 2-year / 50,000 mile parts and labor warranty.
( 1 )
$5,661.89
If it's affordable performance you're looking for to power your project vehicle, Chevrolet Performance's SP350/357 Base Chevrolet crate engine delivers! With 357 hp and a deep reserve of low-rpm torque, it quickly reminds you why Chevrolet's original 350 small block has been the industry benchmark for decades. The SP350/357 leverages the strength of a strong rotating assembly secured in a brand-new block with 4-bolt mains, along with economical Vortec iron cylinder heads. A roller camshaft optimizes driveability and airflow capability. It all adds up to a 24 hp gain over CPP's 350 HO crate engine—and a great, affordable alternative to rebuilding. This base crate engine package includes an assembled long block, including the oil pan. You finish it off your way, with the ignition system, induction system and additional accessories. SPECIFICATIONS: Engine: SP350/357 Base Horsepower: 357 hp at 5500 rpm Torque: 407 lbs.-ft. at 4000 rpm Compression Ratio: 9.0:1 nominal Block: Cast iron with 4-bolt main caps, 4.000 in. bore Crankshaft: Cast Nodular Iron Heads: Cast Iron; 64cc Chambers Valves: 1.940 in./1.500 in. Camshaft Lift: 0.473 in./0.473 in. Hydraulic Roller Duration at 0.050 in.: 215 degree/223 degree INSTALLATION NOTES: * Use the Holley 670 cfm 4-barrel carburetor P/N 19170092 to achieve the listed horsepower and torque * Requires intake manifold, carburetor, distributor, spark plug wires, and water pump to complete assembly * Requires feed line from fuel pump to carburetor * Not intended for marine applications * Balancer and flexplate are NOT included
( 1 )
$6,215.21
Chevrolet Performance LT1 6.2L E-Rod long block crate engines have it all. They're architecturally similar to the LS family of small block engines, but with a unique block casting, cylinder head design, oiling system, and more. LT1 engines also combine advanced technologies—including direct-injection and continuously variable valve timing to support an advanced combustion system. Offered with a wet-sump or dry-sump oiling system, the Chevy E-Rod engine systems include the specially designed engine controller for retro-fit applications and harness needed to get the engine running. Engine specs and features: * Cast aluminum with 6-bolt nodular iron main bearing caps * Direct-injection, spark-ignition Gen-V small block V8 * Horsepower: 455 at 6,000 rpm * Torque: 465 lbs.-ft. at 4,600 rpm * Crankshaft: Forged steel * Connecting rods: Forged powdered metal * Pistons: Eutectic * Camshaft type: Billet steel roller * Valve lift (in.): .561 intake/.531 exhaust * Camshaft duration (at 0.050 in.): 200 degrees intake/212 degrees exhaust * Cylinder heads: Aluminum, rectangular port D/I * Valve size (in.): 2.13 intake/1.59 exhaust * Compression ratio: 11.5:1 * Rocker arms: Investment-cast, roller trunnion * Rocker arm ratio: 1.81:1 * Recommended fuel: Premium pump * Maximum recommended rpm: 6,600 * Reluctor wheel: 58x * Balanced: Internal * Engine control module * Exhaust manifolds * Catalytic converters * Mass airflow sensor and sensor boss * Oxygen sensors and sensor bosses * Air filter * Accelerator pedal * Evaporative emissions canister * Instruction manual
Not Yet Reviewed
$11,618.16
—
$12,212.88
Specially tuned for torque, the all-new HT383 delivers great power in a small block package for your truck or street rod. These Chevrolet Performance 383 c.i.d. 4-bolt main, cast iron engines, have approximately 9.1: 1 compression with 323 hp at 4,200 rpm, and 444 ft.-lbs. of torque at 3,000 rpm. Included with these engines are forged 4340 steel externally balanced crankshafts, 5.7 in. powdered metal connecting rods, hypereutectic dished top pistons with offset pins. Hydraulic billet steel roller camshafts are installed with .431 in. intake lift, .451 in. exhaust lift and duration at .050 in. for intake is 196 and 206 for exhaust with lobe centerline at 109 degrees. Stamped steel self aligning rocker arms with 1.5:1 ratios are installed on the Vortec cylinder heads. All aluminum dual plane dual flange intakes with external EGR provisions, cast iron long leg, standard "V" belt rotation water pumps with 1979-86 power steering pump boss. Valve measurements are 1.940 in. for intake and 1.50 in. for exhaust. Additional items installed with these crate engines are 8 in. harmonic balancers, 12 3/4 automatic flexplates, 4-qt. oil pans with windage trays, painted valve covers with oil cap, grommets, provisions for PCV and breathers. Composite front timing covers, brass freeze plugs, engine oil dipstick and tube for passenger side location. Spark plugs come installed along with fuel pump block-off plates and Engine lift tabs for easy installs. These HT383 are ideal replacements for any 1978 and older carbureted engines or off-road applications.
( 1 )
$7,688.77
Chevrolet Performance CPP LT1 6.2L long block crate engines were introduced on the seventh-generation Corvette Stingray, and opened the next chapter in the long, historic legacy of small block engines. Architecturally similar to the LS family of engines, these LT1 engines feature a unique block casting, cylinder head design, oiling system and more. They're offered with a wet-sump or dry-sump oiling system. Chevrolet Performance CPP LT1 6.2L long block crate engine features and specs: * Engine type: Direct injection spark ignition Gen V small block V8 * Displacement: 376 c.i.d. * Bore x stroke: 4.065 x 3.622 (103.25 x 92mm) * Block: Cast aluminum with 6-bolt nodular iron main bearing caps * Crankshaft: Forged steel * Connecting rods: Forged powdered metal * Pistons: Hypereutectic aluminum * Camshaft type: Billet steel roller * Valve lift: .561 intake/.531 exhaust * Camshaft duration (@ 0.050 in.): 242 degrees intake/244 degrees exhaust * Cylinder heads: Aluminum, rectangular port * Valve size: 2.130 intake/1.590 exhaust * Compression ratio: 11.5:1 * Rocker arms: Investment-cast roller trunnion * Rocker arm ratio: 1.81:1 * Recommended fuel: Premium pump * Maximum recommended rpm: 6600 * Reluctor wheel: 58X * Balanced: Internal
Not Yet Reviewed
$9,656.54
Chevrolet Performance LS3 6.2L 376 c.i.d. 430 hp long block crate engines use an impressive 10.7:1 compression ratio to put out 430 hp at 5,900 rpm and 425 lbs.-ft. of torque at 4,600 rpm. Based on the production LS3 engine, these engines use L92-style rectangular-port heads. They feature a cast aluminum engine block with a nodular iron crankshaft, powdered metal connecting rods, and hypereutectic pistons. The steel hydraulic roller camshaft has a .551 in. intake and .522 in. exhaust valve lift with 204 degrees intake and 211 degrees exhaust valve duration at .050 in. camshaft lift. Long block crate engines also include: * F-body style oil pan, pump and pickup * Harmonic balancer * Front timing cover * Oil Filter
( 5 )
$7,094.42
Chevrolet Performance has released its latest factory-engineered LS high-performance engine: the 376/525 LS3 long block. It blends the racing-derived ASA camshaft with the LS3 6.2L production engine to create the most powerful production-based crate engine in Chevrolet Performance's portfolio, delivering 525 hp at 6,200 rpm and 486 lbs.-ft. torque at 5,200 rpm. (For installation in older vehicles, the engine controller kit part number 19354332 is calibrated specifically for this new engine.) Using the LS3 production engine—the same used in Corvettes and Camaros—as the foundation for the LS 376/525 helped keep the retail price lower; while the ASA camshaft is a proven, power-building component that's been successful in the high-RPM world of Circle Track racing. The ASA camshaft is a hydraulic roller with .525-inch lift on both the intake and exhaust sides, along with 226 degrees duration on the intake side and 236 degrees on the exhaust side. Coupled with a tight, 110-degree lobe separation angle, it helps the engine deliver excellent throttle response and breath exceptionally well at high RPM. The cam also gives the LS 376/525 the most aggressive personality among Chevrolet Performance's growing lineup of production-based high-performance crate engines, which also includes the LS 376/480 and the carbureted LS 376/515. Front-end accessories must be obtained separately, along with the engine controller kit. Chevrolet Performance offers several accessory drive kits to suit a variety of applications; and some installations for older vehicles will require the oil pan changed. Engine specifications: * Power: 525 hp at 6,200 rpm, 486 lbs.-ft. of torque at 5,200 rpm * Displacement: 376 C.I.D., 6.2L * Bore x Stroke: 4.060 in. x 3.620 in. * Compression Ratio: 10.7:1 * Recommended Fuel: 92 Octane * Block: Cast Aluminum with 6-bolt cross bolted main caps * Crankshaft: Nodular Iron * Connecting Rods: Powdered Metal Steel * Pistons: Hypereutectic Aluminum * Camshaft: Steel Hydraulic Roller Tappet * Cam Lift: .525 in. Intake / .525 in. Exhaust * Cam Duration at .050 in.: 226 deg. Intake / 236 deg. Exhaust * Lobe Separation: 110 Degree * Cylinder Heads: Aluminum L92 style ports * Combustion Chamber: 68cc * Valves: 2.165 in. Intake/ 1.590 in. Exhaust * Rocker Arms: Cast Roller Trunnion, 1.7:1 Ratio * Balance: Internal * Reluctor: 58X * Maximum GM Recommended RPM: 6,600 * GM Recommended Torque Converter Stall 3000-3400 Engine Includes: -- Fully GM assembled long block -- Oil pump, pick-up and Camaro oil pan (12628771) -- Corvette harmonic balancer -- Front timing cover with cam sensor -- Oil filter -- Passenger side RH oil dipstick and tube (not included) (Note: Does not include oil dipstick tube, oil dipstick, or steam crossover tube.)
( 2 )
$7,890.20
Chevrolet Performance LS3 6.2L 376 c.i.d. 430 hp long block crate engines use an impressive 10.7:1 compression ratio to put out 430 hp at 5,900 rpm and 425 lbs.-ft. of torque at 4,600 rpm. They feature a cast aluminum engine block with a nodular iron crankshaft, powdered metal connecting rods, and hypereutectic pistons. The steel hydraulic roller camshaft has a .551 in. intake and .522 in. exhaust valve lift with 204 degrees intake and 211 degrees exhaust valve duration at .050 in. cam lift. Long block crate engines also include: * Ignition coil packs * Spark plug wires * Spark plugs * Intake manifold * Fuel injectors * Throttle body * Exhaust manifolds * 14 in. flexplate * Front timing cover * Aluminum water pump * Harmonic balancer * Passenger side right hand dipstick and tube
Not Yet Reviewed
$10,206.16
Chevrolet Performance's 350 c.i.d. base long block crate engines are their most popular choice—because no one else can deliver as much performance for this kind of value. Chevrolet Performance believes that everyone should be able to afford a high-quality GM V8 without going broke. Got a tired, old Chevy that needs a lift? Then these replacement engines are just right for you. Chevrolet Performance 350 base long block engine assemblies start with a 4-bolt main bearing block, aluminum pistons, and a hydraulic camshaft. Then they're topped with cast iron cylinder heads designed to be extremely durable, while still providing good airflow through the engine.
( 4 )
$5,401.99
Chevrolet Performance LT4 6.2L supercharged wet sump crate engines are engineered for supremacy. These powerhouses are the heart of the Corvette Z06 and feature 1.7L Eaton R1740 TVS superchargers spinning up to 20,000 rpm--enough to generate more than 9 lbs. of boost, along with big horsepower and torque. These LT4 long blocks have several unique features designed to support their higher output and the greater cylinder pressures created by forced induction. They include Rotocast A356 T-6 aluminum cylinder heads that are stronger and handle heat better than conventional castings, lightweight titanium intake valves, and stronger forged aluminum pistons. Technical specs: * Engine type: Gen V small block V8 * Displacement: 376 c.i.d. * Bore x stroke: 4.065 in. x 3.622 in. * Block: Cast aluminum with 6-bolt, cross-bolted main caps * Crankshaft: Forged steel * Connecting rods: Forged powdered metal steel * Pistons: Forged aluminum * Compression ratio: 10.0:1 * Camshaft type: Hydraulic roller * Valve lift: .492 in. intake/.551 in. exhaust * Camshaft duration (at .050 in.): 189 degrees intake/223 degrees exhaust * Cylinder heads: A356 T-6 Rotocast aluminum, as-cast with 65.5cc chambers * Valve size: 2.130 in. intake/1.590 in. exhaust * Recommended fuel: Premium pump * Maximum recommended rpm: 6,600 * Please note: Assembly does not include any electronics
( 2 )
$17,917.84
—
$19,007.73
Here, at last, is the king of all big block crate engines from Chevrolet Performance. The ZZ502 cu. in. Base Engine is the same long block assembly used in the Deluxe version but without the extra bolt-on parts. Perfect for when you want to upgrade your big block to the 502 but want to use some of your current parts.
( 1 )
$11,340.38
This Chevrolet Performance 5.7L 350 c.i.d. HO turnkey long block crate engine is assembled with brand new components from General Motors. Starting with a new GM 4-bolt main block, it includes the cast iron high-flow Vortec heads, dual-plane aluminum intake manifold, 9.0:1 compression ratio, and a hydraulic flat tappet camshaft that provides you 333 hp and 381 lbs.-ft. of torque. It includes a GM HEI distributor, a 670 cfm Holley carburetor, and is shipped with a 153-tooth small diameter flexplate. Engine specs: * Block: Cast Iron, 4-bolt main caps, 1-piece rear seal * Compression Ratio: 9.1:1 * Crankshaft: Cast Nodular, 3.480 in. Stroke * Duration at 0.050 I/E: 212 / 222 * Camshaft Lift: 0.435 in. / 0.460 in. Hydraulic Flat Tappet * Heads, Chamber Size: Vortec iron, 64cc * Horsepower: 330 hp at 5,000 rpm * Intake Manifold: Aluminum Dual Plane * Torque: 380 lbs.-ft. at 3,800 rpm * Valves (I/E) (in.): 1.940 / 1.600 * Condition: New
Not Yet Reviewed
$7,311.29
Modal Header
Truck / SUV
Jeep®
Gifts, Clothing, & More
Restoration
Stock Replacement
Late Model Muscle
Tools
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
