Filters
The fuel additives used in today's vehicles can cause your conventional rubber hoses to breakdown over time. Earl's Performance EFI Vapor Guard hoses are a unique, 3-layer barrier to fuel penetration. Vapor Guard's secret is in its layers. The innermost primary barrier layer offers high resistance to heat and aggressive fuels. The middle barrier is a thermoplastic layer that provides superior fuel isolation and virtually eliminates vapors from escaping through the hose. The exterior over-barrier provides extreme tolerance to heat and ozone, giving Vapor Guard hoses a 3-way shield against hose deterioration. Make sure that your vehicles get the fuel they need to get you where you need to go.
( 34 )
$6.25
—
$139.95
Earl's Performance power steering hoses are triple-steel and fabric braid-reinforced high-pressure hoses. They were developed specifically to meet the demands of power steering systems. These flexible hoses are also suitable for hydraulic and air lines, and come with a blue fabric outer covering. When used with Earl's power steering hose ends, Earl's power steering hose is rated for up to 2,250 psi operating pressures. The use of other manufacturer's hose ends is not recommended.
( 25 )
$11.03
—
$254.95
Earl's Performance Speed-Flex brake lines are factory-assembled brake lines made from the same Speed-Flex stainless steel braid-protected hose of extruded PTFE that is the worldwide standard of the racing industry for flexible brake, clutch, and instrument hoses. They're assembled with Earl's Speed-Flex crimp or swaged permanently-installed hose ends. Speed-Flex brake lines provide a firmer brake pedal, improved brake pedal feel, and better brake modulation. Each hose is pressure tested to 4,000 psi.
( 112 )
$13.50
—
$57.91
Earl's Performance annealed stainless steel tubing will assist you in creating precision hardline systems. The straight lengths of 304 stainless steel are easily formed with tools and can be flared. Plus, they can be polished for a custom look. Earl's tubing is available in several diameters and lengths to fulfill your application needs.
( 10 )
$34.10
—
$111.95
These high-temperature elastomeric auto-flex hoses are ideal for almost all street and marine applications, and many non-critical competition uses. These high-quality hoses have a nice looking stainless braided outer cover that protects the synthetic rubber inner liner, allowing continuous operating temperatures of -40 degrees to 300 degrees F. These auto-flex hoses are good for fuel, oil, water, and many other fluids.
( 30 )
$11.33
—
$488.95
Earl's Performance billet fuel logs are compatible with pump gas, race gas, and E85. Crafted from billet aluminum and black anodized, these feed lines are designed for use with most dual inlet Holley carburetors with 7/8 in.-20 threads on the fuel bowls. The bowl extension adapters pivot at the fuel log end to provide extra-clearance and easier assembly. Features and benefits: * Adjustable billet aluminum fuel log—8 1/2 in. to 11 3/4 in. * Swivel extensions allow adjustment and easier assembly * Fuel log inlets and outlets: -10 AN O-ring female on each end * Fuel inlet fitting: -8 AN male to -10 AN O-ring port * Fuel log outlet: -10 O-ring port plug * Plug can be removed for use with return-style fuel pressure regulator * Two 1/8 in. NPT ports for fuel pressure gauge * Fits Holley 4150, 4160, and 4500 carburetors * Adapters, O-rings, plugs, and sealing washers for the fuel bowls are included
( 7 )
$155.95
Earl's Performance Pro-Lite 350 hose is constructed from a tough, abrasion-resistant nylon sheathing banded to the textile inner braid that's embedded in the synthetic rubber liner. This gives the hose incredible flexibility, while maintaining the ability to withstand high vacuum and hot oil temperatures. The hoses are rated to withstand a maximum pressure of 350 psi and an operating temperature range of -40 to +300 degrees F. Pro-Lite 350 hose can take the most demanding conditions and still deliver you to the winner's circle.
( 25 )
$13.40
—
$999.95
Available in both dedicated and universal styles, these swivel-seal fuel lines from Earl's Performance will solve the fuel delivery problems for anybody using dual-feed Holley carburetors. Dozens of fitment and material options are available, including various fuel line and braided flex line construction choices. The AN and NPT fittings are made from aluminum with an anodized finish for durability. These swivel-seal fuel lines couldn't be any easier to install. Order the part that matches your carburetor specs and keep the fuel flowing efficiently.
( 31 )
$151.95
—
$214.95
Earl's Performance Pro-Lite Ultra hose is the premier choice for your hot rod or race car. It features advanced designs that make the hose ideal for high-pressure applications up to 500 psi. Their inner tube of oil-resistant "PKR" synthetic rubber won't degrade or leak when exposed to most fluids, and it's reinforced with a stainless steel braid that greatly increases the hoop strength—keeping the hose from bulging or separating from its fittings. Finally, the braided nylon fiber cover is resistant to oil, abrasion, and extreme weather, keeping Pro-Lite Ultra hose looking great and functioning the way it's meant to.
( 3 )
$12.14
—
$586.95
Earl's Performance Speed-Flex hose is used with the Speed-Seal reusable hose ends and can handle pressure of up to 3,000 psi. Earl's considers it their highest-pressure hose, and it's lightweight and resistant to almost everything. Speed-Flex is most commonly used for brake lines, fuel/oil gauge lines, hydraulic clutches, power steering, and fuel and oil lines. It's constructed from synthetic rubber or PTFE, with a braided stainless steel covering. Some hoses are PCV coated, as well. Your options include operating psi, size, length, and color. Order the Speed-Flex hose needed for your applications.
( 22 )
$7.27
—
$268.95
Earl's Performance Speed-Flex extension hoses are ideal for remote mounting sensors away from your engine to reduce heat and vibration. All Speed-Flex hoses are compatible with gasoline, hydrocarbon fuels, alcohols, nitro-methane, mineral and synthetic lubricants, and high-density fuel additives—thanks to their stainless steel braid protected PTFE inner liner. Each hose is factory-assembled with Earl's Speed-Flex crimp or swaged permanently installed hose ends, and is pressure-tested up to 4,000 psi.
( 3 )
$32.55
Earl's Performance Vapor Guard submersible hoses are ideal for use inside fuel tanks to attach the in-tank fuel pump or pickup. Most other fuel hoses are designed to handle fuel only on the inside and can be damaged if submersed in fuel. These suffer no problem with submersion and can be used with race gas, pump gas, alcohol and ethanol-blend gasoline, biodiesel, and diesel fuel. They're available in 5/16 in. or 3/8 in. sizes and 2 ft. lengths. Dive in to the submersible world with Earl's Performance Vapor Guard submersible hoses. Features and specs: * Exceeds SAE 30R10 standards * 100 psi maximum working pressure * -40 degrees to 302 degrees F temperature range * 10 in. Hg (inch of mercury) maximum vacuum * 2.5 in. minimum bend radius * Actual O.D. sizes: 0.585 in. (5/16 in. size) / 0.625 in. (3/8 in. size)
Not Yet Reviewed
$73.89
—
$76.05
Earl's Performance carburetor Vapor Guard hoses combat modern fuel's deterioration and eliminate the safety hazards associated with fuel vapors and the leakage that occurs as the traditional rubber hoses deteriorate. Earl's Vapor Guard hoses are multi-layered and designed to withstand the corrosive properties of modern fuels. The initial layer offers high resistance to heat and aggressive fuels, and they save one gallon of gas each year as compared to traditional rubber hoses from permeation alone. Earl's Vapor Guard hoses are your long-lasting hose solution!
( 4 )
$6.04
—
$111.95
Earl's Super Stock hose is high-quality synthetic rubber tubing, reinforced by a full-coverage interior braided fabric sheath. This superior replacement hose for original equipment applications has recently found favor with professional racing teams. Available in blue or black, Super Stock is rated at 250 psi and 250 degrees F continuous service. To prevent collapse in suction service or for very tight bends, Earl's supplies an internal spiral reinforcing wire. It's suitable for fuel, oil, and water. Order the hose size, length, and diameter needed for your applications.
( 13 )
$6.10
—
$205.95
When it comes to running brake, fuel, or transmission cooler lines, you'll need Earl's Performance steel tubing. They use double-wall low carbon steel, as well as copper brazed tubing that comes with either zinc plating or an olive poly-vinyl-fluorine (PVF) coating ideal to use on vehicles exposed to snow, road salt, gravel, salty air, or other extreme environments. Earl's Performance steel tubing is DOT-approved for hydraulic systems, available individually or with tube nuts, and comes in 3/16, 1/4, 5/16, and 3/8 in. diameters.
( 5 )
$40.51
—
$58.25
Earl's Performance hose inner support springs will keep your hoses flowing at optimum levels no matter what the position. They are manufactured from high-grade stainless steel for maximum durability. Earl's Performance hose inner support springs can be used when tight bends are the only option, and they will not sacrifice flow.
( 17 )
$18.25
Top racing teams depend on Earl's Perform-O-Flex hose. It features an inner liner of Temprel synthetic rubber, a partial-coverage protective sheath of stainless steel braid embedded in the liner during manufacturing, and a full-coverage outer protective sheath of high-tensile stainless steel wire braid. It can withstand an operating temperature range of -40 degrees F to +300 degrees F, and still deliver you to the winner's circle. Perform-O-Flex hose is compatible with most fuel, oil, and water; and it's available in a wide variety of AN sizes, lengths, and diameters.
Not Yet Reviewed
$104.95
—
$739.95
Earl's Performance Easy-Form tubing is made from copper-nickel alloy that is strong as steel, but much easier to bend and flare. This alloy is approximately 90 percent copper and 10 percent nickel, and should not be confused with typical copper tubing found at hardware stores. The alloy is much easier to form (can be bent and formed with just your hands). Easy-Form doesn't rust or corrode and is DOT-approved for use on hydraulic brake systems. Features include: * Ideal for use on all automotive hardline applications * Can be polished to shiny, copper finish
( 5 )
$48.85
—
$88.05
Earl's Performance UltraPro hoses go way beyond "good enough." Why would you plumb your high performance, high-powered vehicle with traditional rubber hose, even if it's steel braided? Earl's UltraPro Series of stainless steel and polyester braided hoses are designed to withstand today's modern fluids, harsh environments, brutal vibration, flow requirements, and extreme pressures. You no longer need worry about frequent replacement, deterioration from fuels, and the safety hazards of vapors and leaks. And, UltraPro hoses are much lighter, more rugged, more flexible, and offer more flow. All of this, plus great looks, peace of mind, and a price that's hard to argue with—why wouldn't you choose Earl's UltraPro hoses for performance plumbing? Features of superior Earl's UltraPro hoses: * PTFE inner liner impervious to all known fuels, oils, and coolants used in automotive applications, is carbon-infused for static dissipation, and has ultra-low coefficient of friction to promote maximum flow * Double-helix ribbed inner hose liner offers extreme flexibility and full-flow, making tough plumbing jobs a snap with fewer hard connections * Liner is reinforced with an outside glass-fiber wrap for additional strength and integrity * Polyester braid hoses are up to 67 percent lighter, and the stainless steel braid hoses are up to 37 percent lighter than traditional rubber hose with stainless steel braid * Available in popular -6, -8, -10, -12, -16, and -20 AN sizes * Available in specific lengths and bulk to meet your application needs
Not Yet Reviewed
$27.11
—
$804.95
Earl's Tube-Braid is easy to install and is the most cost-efficient way to customize any engine modification. Tube-Braid is available in stainless steel and colored nylon to match any engine compartment. These hose covers simply slip over existing hoses and wires, giving them an expensive, professional look. Tube-Braid is sold 1 ft., 2 ft., 3 ft., 4 ft., 6 ft., and 10 ft. lengths.
( 9 )
$7.27
—
$82.49
The packaging envelopes of the modern racing car become tighter each year, leaving less room for auxiliaries such as plumbing. At the same time, it becomes more and more difficult to get the cars down to minimum weight. Earl's Performance Ultra-Flex 650 hose solves these issues. Earl's finest and lightest hose combines a woven, ultra-light KEVLAR® braid with smooth-bore PTFE tubing for increased flow and convoluted outside for incredible flexibility. It also has significantly higher flow and pressure ratings than conventional convoluted PTFE hose. Earl's Performance Ultra-Flex 650 hose is 60 percent lighter than their stainless braid-protected synthetic rubber hose. You have spent a lot of time, energy, and money on your race engine, and you should bring life-sustaining fluid to it with the best hose on the market today--Earl's Performance Ultra-Flex 650 hose.
Not Yet Reviewed
$32.55
—
$663.95
Earl's Performance Speed-Flex hose assemblies are constructed from PTFE-lined synthetic rubber and covered with a braided stainless steel. The hoses are assembled with high-quality AN swivel-end fittings—and are available in a dozen or more lengths. Speed-Flex hose is commonly used for brake lines, fuel/oil gauge lines, hydraulic clutches, and power steering. It can handle up to 4,000 psi and is considered the standard of the racing industry.
Not Yet Reviewed
$41.79
Earl's Performance Ultra-Flex 660 hose uses the same inner tubing as Earl's KEVLAR®-covered Ultra-Flex 650 hose, but it is covered with high tensile strength 304 stainless steel braid. You get the same flow rate and flexibility advantages as their KEVLAR®-covered hose, but with additional protection. The carbon-lined inner tubing (for static dissipation) is smooth bore with a large ID for maximum flow; the convoluted exterior provides incredible flexibility. Ultra-Flex 660 hose is 40 percent lighter and has an average ID 14 percent larger than Earl's premium stainless braided rubber hose. Additional features of Earl's Performance Ultra-Flex 660 hose include: * Inner tubing made of PTFE for a large range of applications including fuel (including exotics and E-based), oil, water, methanol, and air * Very high vacuum rating of – 29Hg * Remains flexible at temperatures between -94 degrees F and +510 degrees F * Clean and fast flowing * Sold by the foot * Accepts the same hose ends and crimp collars made for KEVLAR® Ultra-Flex 660 hose—using the same crimper and dies Note: For use with Earl's Ultra-Flex crimp-style hose ends only. No other Earl's hose ends are intended for use with this hose. The use of other manufacturers' hose ends is not recommended and may compromise the pressure capabilities and durability of the hose.
Not Yet Reviewed
$244.95
—
$434.95
At 80 mph, Earl's says that their Hyperfirm U-Spec-It individual brake lines reduce stopping distance by as much as 18 ft. As if that weren't a good enough reason to use Hyperfirm brake lines, they also give you a firmer pedal feel and reduce brake pulsation. The PTFE/stainless steel hose used in these assemblies is pressure-tested at 4,000 psi and is DOT-approved. More than that, though, each brake line set is individually inspected and tested before Earl's ships it. Get the stopping power you need with these Earl's Performance Hyperfirm U-Spec-It individual brake lines.
Not Yet Reviewed
$46.33
Modal Header
Truck / SUV
Jeep®
Gifts, Clothing, & More
Restoration
Stock Replacement
Late Model Muscle
Tools
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
