Filters
Summit Racing™ engine stand adapters are a better way to mount your engine block to your stand. Built from billet aluminum, these plates eliminate the adjustable arms and use all of the available bellhousing bolt holes. The result is a more rigid, secure mount that will eliminate most of the sagging that occurs as you add more weight to the engine assembly.
( 2 )
$109.99
Remove old cam bearings and install new ones like a professional with our Summit Racing™ cam bearing installation tools. These kits contain an arbor with the drive mount, drive spools, spool stabilizers, and a drive cap. Even if it's your first time installing cam bearings, the instructions will walk you through the process with success.
( 184 )
$65.99
COMP Cams crankshaft sockets are the perfect addition to your engine-building toolbox. They accept 1/2 in. drive ratchets for versatility and easy engine rotation. They're precision-machined for an accurate fit over the crank snout, and their knurled retaining nut threads-on to sandwich a degree wheel in place. The nut can be loosened, while on the crank snout, so that the wheel can be turned independently of the engine when finding top dead center.
( 185 )
$52.95
If you need to install cam bearings in a small block Chevy, then you definitely want Allstar Performance cam bearing installation tools. These tools are must-haves for installing or removing your cam bearings quickly and easily without damage. The tools are crafted with a steel shaft and an aluminum pilot and driver.
( 159 )
$43.99
Our Summit Racing™ crank-turning sockets will make turning your crank a snap. Made from non-marring aluminum, these sockets allow you to turn your engine over by hand to check clearance, degree your cam, or whatever else you may need to do. They accept a 1/2 in. drive ratchet or breaker bar.
( 78 )
$22.79
RAM billet steel alignment tools are precision-machined for perfect alignment of clutch discs. These specialty tools feature an open backside that allows the clutch pack to be progressively loaded without having to juggle all of the parts when performing the clutch install. Tool models are available to service a variety of pilot and shaft diameters, as well as input spline quantities. This is a must for installing any dual disc clutch unit.
( 46 )
$49.00
Make it easy to turn your engine's rotating assembly with one of Proform's crankshaft-turning sockets. They're made of non-marring aluminum and accept a 1/2 in. drive breaker bar or drive ratchet. The sockets enable you to rotate the crankshaft in the proper direction when the balancer is off, making your engine assembly much quicker and easier.
( 62 )
$20.99
—
$29.99
Performance Tool keeps it simple. Their harmonic balancer puller kits give you what you need to easily remove harmonic balancers from a variety of engines. They are made from quality alloy steels and include an assortment of bolts. Additionally, their design helps prevent damage to the pulley and shaft. Regardless of your vehicle type or budget, Performance Tools has the perfect harmonic balancer puller for you.
( 46 )
$39.99
Melling oil pump screen installation tools are designed to install and remove the oil screen without risking damage. They are made from steel and feature a black oxide finish.
( 27 )
$88.99
—
$96.99
On Sale
Summit Racing™ engine lift plates allow you to lift your engine up by its intake manifold for easier maneuvering. You can also use them as manifold covers when you store your engine.
( 168 )
$111.99
Even out your tire tread wear with these SPC Performance camber tools. They are designed to easily adjust the camber on your vehicle. The tools are application-specific, so you can be sure that they will work on your vehicle. Make fast, easy, accurate camber changes with one of these SPC Performance camber tools.
( 3 )
$69.99
Sunex Tools crankshaft turning sockets are a necessity for engine building. These non-marring aluminum metal sockets are available for several applications to assist you in turning the crank while adjusting valve lash and piston-to-valve clearance. Give your engine build a good turn with help from Sunex Tools crankshaft turning sockets.
( 56 )
$21.99
Remove pressed-in rocker studs and tap for screw-in studs with these rocker stud puller and tap guides from COMP Cams. To remove pressed-in rocker studs, slide the rocker stud puller over two side-by-side studs, and then crank down on the retaining nut to force out the stud. Use the tool with the included tap guide to ensure proper alignment when tapping the stud boss for screw-in studs.
( 9 )
$44.95
RideTech AirPod covers keep your system under cover and your trunk looking good. These heavy-duty covers provide a professional, aesthetic look for your 3 or 5-gallon RideTech AirPod compressor. The covers are easy to install for a clean, sleek appearance.
( 1 )
$155.00
—
$165.00
Centerforce clutch alignment tools are designed to align the flywheel and clutch disc for the trouble-free insertion of the input shaft. They're available for a wide variety of applications.
( 75 )
$6.95
Moroso degree wheel crankshaft sockets easily turn over your engine and degree-in the camshaft. These sockets have a 1/2 in. drive and make it easier to locate TDC and BDC. They feature a knurled jam nut that is used to position a degree wheel, and can be loosened and turned separately from the socket. A broached keyway allows the socket to slide over the crankshaft snout for positive engagement.
( 8 )
$93.99
Allstar Performance rear main seal adapter alignment tools are used to install adapters in order to convert a one-piece rear main seal on 1986 or later Chevy small blocks to the old-style, 2-piece rear main seal so that a pre-1986 crankshaft can be used. These alignment tools allow for a quick and easy adapter installation.
( 4 )
$74.99
Proform rocker stud remover and tap alignment kits can easily remove those pesky factory-installed, pressed-in rocker studs before installing the heavy-duty screw-in studs required for high-performance valvetrain components.
( 7 )
$23.99
Make it easy to turn your engine's rotating assembly with one of Milodon's crankshaft sockets. They're made of high-quality steel, accept a 1/2 in. drive breaker bar or drive ratchet, and feature a gold iridited finish for durability. These sockets enable you to rotate the crankshaft in the proper direction when the balancer is off, making your engine assembly much quicker and easier.
( 24 )
$31.99
Powerhouse Products rocker stud puller and tap guides provide an easy way to remove pressed-in rocker studs. Simply slide the tool over two side-by-side studs and crank down on the retaining nut to extract the stud. Then use the tool, with the supplied arbor, to ensure proper alignment when tapping the boss for screw-in studs.
Not Yet Reviewed
$42.95
Proform heavy-duty crankshaft turning nuts easily install through the harmonic balancer and into the end of the crankshaft with the included Grade 8 bolt. Once that's done, your balancer is held securely, and you have a turning nut that is ready to rotate whenever necessary.
( 4 )
$29.99
You know what a chore it can be to remove high-pressure valve springs with shaft mounted rocker arms. Remove and install valve springs the safe and correct way with COMP Cams shaft mount valve spring compressors. They are designed to facilitate valve spring removal on heads with shaft mounted rockers while the cylinder heads are still on the engine.
( 23 )
$151.95
Proform rod balancers make it easy to determine whether your connecting rods are balanced. Just install two connecting rods on the balancer's roller, even them out, and set the roller on the base. In a matter of seconds, you will see if one is heavier than the other, or if they are a matched set.
Not Yet Reviewed
$105.99
Dorman offers a broad spectrum of specialty tools for repair and maintenance on your vehicle, including these precision-made clutch alignment tools. These alignment tools properly align the clutch disk between the pressure plate and the flywheel, before pressure plate is bolted down, for trouble-free clutch alignment and installation.
( 5 )
$2.99
Modal Header
Truck / SUV
Jeep®
Gifts, Clothing, & More
Restoration
Stock Replacement
Late Model Muscle
Tools
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
