Filters
Flaming River manual rack and pinions are built from lightweight aluminum castings—and feature chrome plated center tubes and two mounting holes. Designed to meet the standards of professional street rod and race car chassis builders, they weigh less than 15 lbs. each. These rack and pinions are a great way to streamline the engine compartment while maintaining smooth, responsive steering.
( 48 )
$304.99
—
$460.99
Summit Racing™ Racing manual rack and pinions have stock mounting locations, a chromed center tube and a polished housing.
( 34 )
$312.99
Helix Mustang II and Pinto spindles are engineered to retain the original stock factory Ford geometry and require no modifications for OE brake parts and related components. The original rotors, bearings, calipers, and hardware are a direct fit into these spindles, making installation simple and trouble-free. Order the pair recommended for your vehicle. Additional features of Helix Mustang II and Pinto spindles: * Constructed from heat-treated 1045 ANSI forged steel * Accepts stock brake/front-end components * Spindles are sold in pairs
( 7 )
$159.95
—
$399.95
Moog replacement tie rod ends are designed as OE replacements for your stock units. Moog replacement tie rod ends feature durable, all-metal construction that is not prone to failure like OE plastic tie rod ends. Since Moog replacement tie rod ends are greasable (except where noted), friction is reduced and contaminants are flushed out. Plus, they have an easy-access wrench flat that allows for the use of a socket for easy installation.
( 783 )
$23.99
—
$37.79
Edelmann Elite power steering filters solves the shortcomings of P/S filters that came before them. They raise the bar on filtering performance to protect the power steering system from contaminates while providing coverage for over 99 percent of vehicles with hydraulic power steering. Incorporating materials such as aircraft-grade anodized aluminum, these universal power steering filters encapsulate Edelmann's Elite philosophy of delivering first-class quality problem-solving products. Connectors and hose clamps are included. Features and benefits: * High capacity stainless steel mesh filter * Larger, more powerful magnet captures additional metal fragments * Dual filtration technology captures metal and non-metallic debris * Built-in safety bypass ensure flow is not inhibited * Aircraft-grade, anodized aluminum body * Serviceable body for a lifetime of use * Easy to clean * Engineered to fight against premature power steering pump and rack failure * Works great in automatic transmission cooler lines, tool * Interchangeable connectors for 3/8 in., 1/2 in., and 5/8 in. hoses
( 3 )
$39.99
KYB Excel-G gas shocks and struts restore original handling and control capabilities. These nitrogen, gas-charged, twin-tube designs have earned an OEA (Original Equipment for the Aftermarket) classification, and KYB offers a huge selection of Excel-G gas shocks to service or upgrade thousands of popular cars, trucks, SUVs, and CUVs applications. Comfort is important, but ride control, as well as stability, stopping, and lane change responsiveness is critical. KYB Excel-G shocks and struts are designed to cover all these performance purposes. Features and benefits: * Vehicle specific, hand assembled in-house damping valves * Ultra-smooth triple chrome plated chrome piston rods reduce seal wear * Multi-lip, synthetic oil seal and wiper engineered to keep fluid in and contaminants out * Seamless, extruded steel tubing in the inner cylinders, and PTFE band around the piston for a positive seal * Restores designed stability * ESC (Electronic Stability Control) and electronic safety systems ready * Helps prolong tire life * Improves stopping distance * Helps maintain wheel alignment
( 778 )
$32.69
—
$33.05
Cardone new rack and pinion units are built better from the start. Cardone uses what they've learned from remanufacturing, as to where--and why--original parts fail. Their engineers then incorporate improvements into the Select rack and pinions, making them better than the originals. Cardone new rack and pinion units feature: * 100 percent computerized testing at load to ensure reliable performance * All rotating and actuating components are properly hardened, ground, and polished to ensure longevity of the components and their respective seals * Cardone Select Engineered (CSE) Technology ensures that all rack and pinion/gearbox units meet or exceed OE-form, fit, and function * Computerized spool valve balancing ensures exceptional feel and return-ability * Environmentally-friendly coating provides a clean appearance and prevents rust * Supplied with OE-grade seals, O-rings, and boots to provide optimal sealing performance and longevity
( 33 )
$237.99
Energy Suspension tie rod end dust boots resist damage from dirt, rocks, sand, water, road salt, and oils, while adding a colorful touch to your steering linkage. Each boot has an important 5-point sealing action that prevents contamination and loss of lubricant—the major cause of rod wear. Your factory originals are likely molded rubber, which will dry rot, crack, and split over time. Energy Suspension bushings are constructed from durable polyurethane in a variety of shapes and sizes to fit countless vehicles. Order them by the pair, the dozen, or in larger quantities!
( 130 )
$5.44
—
$5.60
Moog has a problem-solving heritage. Their focus has always been on improving OE products, designing easy-to-install parts, and developing leading-edge technology. Moog ball joints are no exception, helping to restore your chassis to like-new condition. Performance and durability are traits required to reach the winner's circle, and Moog offers these top-quality steering linkage components for hundreds of applications--front, rear, upper, and lower. Choose the ball joints that match your drivetrain and make/model.
( 1052 )
$46.99
—
$50.99
Lares new (not remanufactured) power steering pumps are engineered to OE specifications to ensure proper fit, form, and function. They're manufactured from the same high-quality materials as your original components to provide long-lasting performance. Over a hundred models are available, with or without an included reservoir, for vehicle and engine applications from 1960 and up. Order the replacement pump recommended for your ride.
( 104 )
$133.99
—
$149.99
QA1 ultimate ball joints feature a patented adjustable design that's strong and extremely wear-resistant. They're available in bolt-in, press-in, and screw-in styles for most popular racing applications. Order the model recommended for your vehicle. Features include: * Ultimate low-friction operation * Infinite preload adjustment allows breakaway torque to be set as low as 0 ft.-lbs. * Completely smooth, bind-free operation * Most wear-resistant design available * Precision tolerance ball-to-race conformity results in even load distribution for unsurpassed wear resistance * Precision-ground 52100 bearing steel race ensures long life and ultra-smooth operation * Steel-reinforced, self-lubricating race * Designed to handle severe impact and high-load applications without sacrificing performance * On-the-car adjustability * Fully greasable, enhanced by self-lubricating components to ensure smooth operation * Various ball studs are available for easy geometry changes * Fine-tune your roll center
( 20 )
$86.95
Cardone remanufactured power steering pumps are among the highest quality remanufactured parts in the aftermarket. That's because they don't just replace components as needed. Through reverse engineering, their technicians pinpoint original equipment design weaknesses by examining failed cores. You'll benefit from the Cardone expertise when you order the remanufactured power steering pump designed to fit your application. Features include: * All critical components are triple-tested to ensure reliability * All units are built with 100 percent new O-rings and premium-grade Viton® seals to prevent leaks and avoid high-temperature breakdown * Every pump is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort, and noise * Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life * Units are supplied with 100 percent tested and calibrated pressure relief valves * Cardone remanufactured parts are business and environmentally friendly
( 130 )
$39.99
—
$71.99
Monroe Monro-Matic Plus shocks and struts are nitrogen gas charged and feature velocity-proportional valving with all-weather fluid. Their twin-tube design offers improved comfort for your vehicle at an economical price. These suspension components are available in many lengths for fitment on a wide range of cars, trucks, vans, and SUVs.
( 240 )
$29.99
Dorman Premium Chassis tie rod ends deliver quality engineering, manufacturing, and performance—at a fraction of the original equipment cost. Their Premium and Premium XL chassis parts cover a comprehensive list of applications and go beyond the quality of OE components to provide extended service life on your vehicle. Replacement tie rod ends may look alike, but they differ in the way they're manufactured and the materials that are used. Dorman Premium Chassis tie rod ends are built to supply you with parts that are stronger, more durable, and more efficient. Order the model recommended for fitment on your specific vehicle.
( 16 )
$25.99
—
$26.99
Cardone new rack and pinion bushings enhance road feel and provide greater durability than typical rubber bushings. These urethane replacements are also supplied with steel inserts. They're available for a wide range of vehicles, including Ford, Lincoln, and Mercury applications from 1974 and up. For premium-quality, brand-new parts you can rely on, trust the experts at Cardone.
( 5 )
$26.99
Moog sway bar bushings are designed to replace your existing bushings without any modifications. They're made of high-grade materials to provide a comfortable ride and resist breaking down over time.
( 139 )
$14.99
Flaming River rack and pinion bellows are designed to keep dirt, dust, and other contaminants out of your steering components. Manufactured from high-density rubber, they stretch and move as the steering wheel is turned. Perfect for your street rod or daily driver, the bellows are available in universal and vehicle-specific applications. Order them individually or in a kit.
( 18 )
$40.99
—
$71.99
KYB Gas-a-Just shocks use higher gas pressure to keep your tires glued to the road. The velocity-sensitive valving system adjusts quickly to changing road conditions for maximum comfort in any situation. Their monotube configuration eliminates aeration and foaming, while micro-smooth, hard-chromed pistons extend their life. Seamless cylinders and eye-rings completely eliminate seam failures. These replacement shock absorbers are available for vehicles as far back as the 1940s. Order the model recommended for your application.
( 1033 )
$41.31
—
$56.37
These Competition Engineering adjustable drag shocks offer a 3-way valving system to dial-in the extension/compression ratio needed for any track condition. The front shocks have three adjustable ratios of 90/10, 80/20, and 60/40. The ratios for the rear shocks are 70/30, 60/40, and 50/50. These numbers represent the percentage of force required to extend (first number) and compress (second number) the shock. By changing the settings on the front and rear shocks, you can dial-in the car to raise the front on initial launch for weight transfer, and then settle smoothly for a final charge to the finish line.
( 237 )
$87.99
Flaming River inner tie rods are available for multiple applications—such as those with the cradle kit, factory racks, or Omni manual rack. They're made of superior-quality materials to ensure long-lasting durability and performance. Order the model recommended for your vehicle and engine family.
( 6 )
$82.99
Cardone engineers have meticulously designed and tested their new power steering pumps to fit and perform like the original. Building on decades of experience, each unit is supplied with premium high-temperature seals and reservoirs for easy installation and reliability you can count on. Build it better; order the Cardone new power steering pump designed to fit your application. Features and benefits: * 100 percent computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle * Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration * Units are supplied with reservoir and cap (when applicable) to reduce installation time and prevent contamination from trapped debris
( 108 )
$111.99
Helix control arm bolts are T-bolt sets offered for Mustang II upper control arms. They are especially designed as stock replacements for the hard-to-find OE specialty bolts. Helix control arm bolts provide easy installation, and each set includes corrosion-resistant coated T-bolts and matching nuts.
( 1 )
$29.95
Edelmann's power steering pumps are the result of pairing modern engineering with high-quality materials. These stock replacements are available in different attachment styles, with or without serpentine pulley, and with or without integral reservoir. Every unit has a unique Designated Numeric Asset (DNA) number permanently etched on the part and includes a matching individual test report, ensuring high standards for durability and performance. Order the model recommended for fitment on your application.
( 1 )
$179.99
These Summit Racing™ inner tie rods were designed as replacements for the Summit Mustang II rack and pinion units.
( 2 )
$51.99
Modal Header
Truck / SUV
Jeep®
Gifts, Clothing, & More
Restoration
Stock Replacement
Late Model Muscle
Tools
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
