Filters
The El Camino of the Jeep family, the CJ-8—more affectionately known as the Scrambler—was produced from 1981 to 1986, combining Jeep and pickup truck in...
The El Camino of the Jeep family, the CJ-8—more affectionately known as the Scrambler—was produced from 1981 to 1986, combining Jeep and pickup truck in ways that escape most mortal understanding. Featuring an extended wheelbase and pickup truck bed, the CJ-8 Scrambler combined the best performance capabilities of Jeep’s CJ line with the utility and head-turning looks of a truck. Summit Racing is your low price leader for Jeep CJ-8 Scramber OEM and aftermarket parts, including parts for your engine, drivetrain, exhaust, steering, brake system, suspension, interior, and exterior, as well as towing equipment,...
The El Camino of the Jeep family, the CJ-8—more affectionately known as the Scrambler—was produced from 1981 to 1986, combining Jeep and pickup truck in ways that escape most mortal understanding. Featuring an extended wheelbase and pickup truck bed, the CJ-8 Scrambler combined the best performance capabilities of Jeep’s CJ line with the utility and head-turning looks of a truck. Summit Racing is your low price leader for Jeep CJ-8 Scramber OEM and aftermarket parts, including parts for your engine, drivetrain, exhaust, steering, brake system, suspension, interior, and exterior, as well as towing equipment, wheels, and tires. Share the joy of Summit Racing with your Scrambler today.
Painless Performance 21-circuit direct-fit Jeep CJ harnesses are fully grounded for use with fiberglass Jeep bodies. Almost every circuit on these 3-section harnesses are pre-terminated at both ends. Painless uses an OEM-style bulkhead connector that attaches to the bulkhead without any special brackets or modifications. The blade-type fuse block wiring is factory terminated and machine crimped. Each wire is custom printed with the circuit identification as well as using factory color codes for easy installation. These harnesses are not equipped for computer controls, nor is it engine specific. Water temperature sender, oil gauge sender, alternator, starter solenoid, tach lead, ballast resistor, and fuel tank sender are not pre-terminated. Includes circuits for: * Air conditioning/heat * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Dome light * Electric choke * Emergency flashers * Fan relay * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and trailer lights * Turn signals * Under hood light * Wipers and washer pump
( 25 )
$899.99
Powermaster street alternators feature all of the quality construction and dependability the company is famous for. The "electrical generators" are available in a variety of amperages and styles, allowing you to choose the best model for your specific ride and the accessories you run. So whether you need an alternator for your truck, hot rod, musclecar, sport compact, or audio competition vehicle, Powermaster gives you the power you need to get it started and keep it going.
( 1684 )
$135.99
—
$390.99
If you're looking to convert over to LED headlights in your classic car or truck, Summit Racing™ direct-fit LED Headlights bulbs will help you see the light. Available with options that include sealed or unsealed, round or rectangular, and single or dual-beam capabilities, you're sure to find what you're looking for. Add some modern capabilities to your favorite ride with the Summit Racing™ direct-fit LED headlights best suited for your application.
( 29 )
$99.99
Red Line created the industry of pushing bubbles out of the way to ensure cooling with their Water Wetter cooling system treatment. It's a unique agent for cooling systems that doubles the wetting ability of water. It offers rust and corrosion protection that allows for use of straight water in racing or reduced antifreeze levels in warm climates. It also improves heat transfer and reduces cylinder head temperature. Help your engine keep its cool with Red Line Water Wetter cooling system treatment. Instructions and specs: * Use 1 bottle for most passenger cars and light trucks—treats 3 to 5 gallons or 13.2 to 15.9 liters * Use 2 bottles with larger cooling systems * Use 1 oz. (3 to 4 capfuls) per quart for small cooling systems * Compatible with new or used antifreeze (including those with DEX-COOL and long-life versions) to improve the heat transfer of ethylene and propylene glycol systems * Satisfies ASTM D2570 and ASTM D1384 corrosion tests for glycol-based antifreezes * Contains no ethylene glycol
( 159 )
$13.89
Summit Racing offers replacement thermostats for thousands of vehicles. They're offered in a variety of styles, materials, flow rates, temperature ratings, and more. A reliable thermostat is essential to your cooling system and overall performance—kicking in precisely when your engine needs it. Order the model best suited for your application.
( 342 )
$8.99
—
$9.99
Summit Racing™ classic OEM radiators are designed to give you top performance cooling, while fitting your vehicle's mounts, so your ride can have a new radiator without having to modify brackets and fittings. The radiators are available in various styles and sizes to best fit your application or engine bay design.
( 400 )
$340.99
—
$400.99
Coker Classic Star Series tires are modern radials with best-in-class speed, load and traction ratings. They feature stylish whitewalls, which are built into the tires from Day One—delivering the perfect look for your classic car. The whitewalls fit many American and European classic cars from the 1960 and earlier. Star Series tire ratings help them to provide excellent treadwear, traction, and temperature control. Another best-in-class rating is the T speed rating (118 mph), as well as XL load rating, thanks to a reinforced sidewall. The low-noise tread looks and performs nicely; and these tires are DOT approved and E-marked for the European market. You won't find a better whitewall radial tire on the market! * Best-in-class traction: Star Series tires feature Grade-A traction and temperature ratings, meaning you can expect excellent handling and traction on wet and dry roads. They're engineered to outperform all other whitewall tires, and feature a 480 AA UTQG rating for long-lasting tread life and unbeatable traction. This makes your classic car safer to drive in all weather conditions and improves your driving experience. * Star Series tires are engineered with a reinforced sidewall to better support the weight of classic cars. This reinforcement gives the tire Extra Load (XL) rating, meaning added safety and a long-lasting sidewall that won't break down over time. * Star Series tires feature a genuine wide whitewall sidewall style. This means that the bright white rubber is added directly to the tire sidewall during initial construction of the carcass, resulting in a truly integrated, high-quality product after vulcanization. Wide whitewall tires were a very popular choice from the 1930s through the end of the 1950s, and were eventually phased out of mainstream production by 1962. Originally, wide whitewall tires featured a bias ply construction, but now Coker Tire offers them in original style bias ply and modern radial construction. * T Speed rated: Up to 118 mph (190 km/h). Often required OE for higher performance trim level classic automobiles. * Available in a wide range of sizes
( 7 )
$209.00
—
$282.00
Do you want a cool looking steering wheel instead of the original-equipment wheel that everyone else has? These kits are where you start. Grant steering wheel installation kits can be used to install all Classic, Challenger, Signature, and Banjo series steering wheels. Each kit contains easy-to-follow, step-by-step instructions, a die-cast hub, Grade 5 hardware, and matte black trim pieces. Installation kits are available for most passenger cars, light-duty trucks, and SUVs, as well as for sport boats and even golf carts.
( 824 )
$29.99
—
$97.99
These Summit Racing™ remote oil filter kits include a bypass adapter, filter mount, 8 ft. of oil hose, barb fittings, stainless steel hose clamps, mounting hardware, and instructions. These kits require a Fram PH8A or equivalent oil filter, which is not included.
( 184 )
$45.79
—
$60.99
Melling replacement hydraulic lifters are perfect for when you're ready to freshen up your engine. Melling has designed these lifters to be within factory tolerances for the perfect fit. They are affordable and available as flat or roller lifters.
( 35 )
$10.99
Red Line MTL transmission gear oil is a 75W80 GL-4 gear oil (SAE 5W30/10W30 engine oil viscosity) designed for use in manual transmissions and transaxles. MTL is a low 75W at very low temperatures, and a high 80W, nearly an 85W, at elevated temperatures, providing adequate viscosity to prevent wear and deaden gear noise. Overall, this gear oil offers excellent protection of gears and synchronizers, and its balanced slipperiness provides a perfect coefficient of friction, allowing easier shifting.
( 69 )
$23.10
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 471 )
$567.52
—
$899.99
Replace weak-type tie rod sleeves that are prone to failure under performance and racing use with new billet aluminum tie rod sleeves from Proforged. These billet aluminum tie rod sleeves can put the ultimate finishing touch on your front-end rebuild. Featuring machined-out solid 6061-T6 aluminum that's MIL-Spec black anodized, these heavy-duty tie rod sleeves are lightweight and look great. Best of all, Proforged thread-matches their tie rod sleeves to their mating tie rod ends to offer the perfect fit.
( 53 )
$78.61
PSC Big Bore XD steering gears are direct replacements for your inadequate steering gear. They feature larger piston diameters, which increase the torque output of the steering gear—allowing your rig to overcome steering issues due to larger tires and/or locking differentials that you've installed. PSC Big Bore XD units are assembled using all new components and featuring their exclusive new gear housing--not reworked core housings, but 100 percent new cast and machined housings. PSC also offers cylinder-assist versions for vehicles that have 38 in. and bigger tires and larger drivelines. Order the steering gears designed for fitment with your make and model.
( 21 )
$1,050.00
McGard lug nuts are designed to last for life. These wheel fasteners are made of restricted chemistry steel for structural integrity, then triple nickel chrome plated in silver or black for lasting beauty. All McGard lug nuts are through-hardened and tempered, reaching the depth of hardness needed for their unsurpassed level of safety (unlike case-hardening, which is only a surface treatment). They're available in a variety of thread sizes, shank lengths and diameters, and seat and conical styles. McGard lug nuts also offer a lifetime guarantee against rust!
( 568 )
$15.99
—
$614.99
Prothane transmission mounts take the sloppiness out of your original rubber-mounted drivetrain. They're designed to control torque, eliminate breakage, and retain their shape. These mounts incorporate a metal run-safe interlock feature, increasing strength and durability of each unit. Don't take unnecessary chances with your vehicle's drivetrain; install Prothane transmission mounts, available in a variety of styles for fitment on specific vehicle applications.
( 164 )
$44.06
Performance Distributors has built D.U.I. distributors for AMC engine owners. Whether you're on the street, off-road, or racing, AMC Street/Strip D.U.I. distributors are ready with 50,000 V of pure energy. The combination high performance coil and Dyna-Module allows you to open up the plug gap for a powerful explosion of fuel mixture and extended dwell time to produce a hotter spark. A better spark means more power, a cleaner burn, and cleaner spark plugs. These one-piece drop-in units eliminate all the wiring of stock systems so that your engine compartment is cleaner, too! They are water, mud, and vibration-proof. Plus, they're built tough with two bushings for shaft stability, and all key pieces are polished and lubed, as they are hand-assembled. All distributors are curved by machine to eliminate pre-detonation and provide instant throttle response. D.U.I. distributors crank up to 7,000 rpm. No matter what type of driving you do, Performance Distributors have AMC D.U.I. distributors to suit your application.
( 64 )
$365.00
—
$429.00
Energy, efficiency, and ecology--that's the E3 equation! The unique patented electrode configuration of the E3 spark plugs increases the amount of combustion pressure created during each power stroke of an engine. This, of course, results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines.
( 698 )
$6.49
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 854 )
$249.99
—
$322.99
Red Line GL-5 gear oil has been engineered to provide the highest degree of protection and improvement of your differential efficiency. Formerly Lightweight gear oil, this new formula contains additional friction modifiers for suitability with clutch-type limited slip differentials, and for most, no additional friction modifiers would be required. This gear oil offers excellent lubrication, a high viscosity index, and the ability to lower operating temperatures, as well as exceeding API GL-5 specifications. Reduce friction for better performance--add the improved formula of Red Line GL-5 gear oil.
( 88 )
$23.53
Perform a suspension upgrade with Rancho RS5000X shock absorbers—to elevate the overall handling and performance of your ride, both on and off-road. The core of these innovative shocks is their unique and patented rebound valving system, and the advanced compression phase of the shock absorber. These shocks are built to last, with double-welded loops, high-capacity twin-tube construction, and a nitro-carburized rod. So, it doesn't matter if your road warrior sticks to the pavement or kicks up some dust—RS5000X shock absorbers will improve your ride all around. Additional features and benefits include: * Progressive engagement valving (compression cycle) * Tuned compression control valve * Gas pressurization of shock * Black natural rubber bushings * Glass-filled Fluon banded piston * Rebound bumper * Protective boot * Low-friction, self-lubricating seal
( 378 )
$60.99
—
$77.99
Whether you drive a Willys, YJ, or something in between, Crown Automotive has the right carburetors to keep your vehicle going. These new carbs are available for classic engines, from the 4-134 L-head through many AMC motors, and up to the 1990 Jeep 4.2. Many are available in individual or kit form to make installation a breeze. Finding OE-style parts can be tough at times. Make your search simple with Crown Automotive carburetors.
( 21 )
$294.99
—
$1,499.99
Bring back the classic slotted look with a set of U.S. Mags Indy U101 polished wheels installed on your ride. They are made from 1-piece cast aluminum and feature the venerable five oval slot design for a great retro look. The wheels are available in different sizes and bolt patterns, so you can put a little of the Indy mojo on each axle!
( 186 )
$210.00
—
$217.00
Mr. Gasket high-performance thermostats are designed to resist large variations in coolant pressures that can occur at high rpms. Under these conditions, coolant temperature and pressure fight for control of the thermostat, keeping it from opening at its designed temperature. These balanced high-performance thermostats have brass-and-copper construction, and open at the right temperature regardless of engine rpm.
( 227 )
$26.95
—
$27.36
Modal Header