Filters
On Sale
BendPak 10AP Series 2-post lifts offer the convenience of wide or narrow installation wrapped up into one configurable package. This durable, reliable car lift features an expandable top beam and Bi-Metric arms to suit virtually every vehicle lifting requirement—symmetric or asymmetric. The simple, yet highly sophisticated lift design of the BendPak 10AP Series 2-post lift keeps service and maintenance costs to a minimum, delivering lower operating expenses and higher productivity. Auto repair shops working on the latest technology need to be equipped with the latest and most advanced tools to service them properly; they need to evolve alongside the vehicles they service. BendPak's all-new AP series of two-post lifts feature a revolutionary design that factors the best qualities of today's two-post lift types into a completely new concept in car lift engineering. The result is a vehicle lift unlike any other two-post lift on the market, purposefully designed for extreme use, high loads and operator safety and efficiency. Specifications for the BendPak 10AP Series 2-post lifts: * Durable powdercoat finish * Expandable top beam accommodates wide or narrow drive-thru configurations * Double-telescoping screw pads offer increased versatility * Padded overhead safety shutoff bar * Exclusive Bi-Metric arm design for more versatile arm positioning * Single-point safety release * Drop-end arms provide a lower pad height * Dual hydraulic direct-drive cylinders * Oversized 53 in. and 59 in. tall carriages for superior strength and durability * Electric/hydraulic HVLP power system * Self-lubricating dura-glide UHMW polyethylene bearing system * Safety locks in each column spaced every 3 inches * Automatic arm restraints withstand over 2000 lbs. of side force * Heavy-duty 1/2 in. aircraft-quality equalizer cables * Oversized cable sheave diameter reduces cable fatigue * Four triple-telescoping arms * ALI certified
Not Yet Reviewed
$5,895.00
$5,595.00
On Sale
Ranger truck spray wash cabinets with skimmer can degrease even your filthiest car parts in no time flat. They're powerful, versatile, and feature a 53 gallon capacity. If your shop handles a lot of larger vehicles, then you'll definitely appreciate the extra-large capacity. With an inside compartment height of 54 in., the spray wash cabinets can handle anything from engine parts to tractor parts. Each unit is equipped with a large, 30 in. diameter turntable that can carry a payload up to 1,000 lbs. These cabinets are built to last, with gasket-free doors constructed of heavy 12-gauge steel, then coated in industrial 2-step primer and a powdercoat finish. Stainless steel nozzles and a 70 gpm pump add to the quality. Choose the easy-to-use spray wash cabinet to clean up your heaviest, dirtiest auto parts: Ranger!
Not Yet Reviewed
$7,895.00
$7,495.00
On Sale
Shorter, wider, taller--BendPak HD-7W car lifts provide extra for your smaller space! These shorter, extra-wide, extra-tall 4-post lifts offer the ultimate in compact convenience with BendPak lifting power. The lifts feature a heavy-duty, high-quality design with large base plates for a good foundation, stainless steel lifting cables for maximum lifting strength, and hydraulic power systems for the utmost dependability. HD lifts are finished with a durable powdercoated finish to withstand the harshest environmental or chemical conditions. Maximize your floor space by moving up with BendPak HD-7W car lifts. Other BendPak HD-7W car lift features include: * 7,000 lb. maximum lifting capacity * Wide drive-through with tall lifting height and short runways * Runways include rail-kit for optional accessories * Electric/hydraulic power system * Single hydraulic cylinder mounted underneath runway * Internal anti-sway slider blocks in each column * Oversized self-lubricating cable rollers * Heavy-duty 3/8 in. aircraft cable * Rugged 1 1/4 in. roller axles * Multi-position safety locks in each column * Adjustable lock ladders * Ramps have nonskid surfaces * Push-button pneumatic safety release
Not Yet Reviewed
$5,595.00
$5,150.00
On Sale
BendPak 10APX Series 2-post lifts are the next generation of lifts with an increased height. These tall-rise lifts are built with the future in mind, and have all the features you'll need to service vehicles as effectively as possible. The revolutionary 10APX lift can handle Electric Vehicles effortlessly and can adapt to both symmetrical and asymmetrical configurations. BendPak's 10APXs have been designed to accommodate mechanics that are constantly in uncomfortable positions while on the job. They offer a lifting height of 79.5 in. and an overhead beam of 157 in., giving you plenty of room to work comfortably with the best equipment available. Features and benefits: * Durable powdercoat finish * Expandable top beam accommodates wide or narrow drive-thru configurations * Double-telescoping screw pads offer increased versatility * Padded overhead safety shut-off bar * Exclusive Bi-Metric swing arm design for more versatile arm positioning * Single-point safety release * Drop-end arms provide a lower pad height * Dual hydraulic direct-drive cylinders * Oversized 53 in. and 59 in. tall carriages for superior strength and durability * Electric/hydraulic HVLP power system * Self-lubricating dura-glide UHMW polyethylene bearing system * Safety locks in each column spaced every 3 in. * Automatic arm restraints withstand over 2,000 lbs. of side force * Heavy-duty 1/2 in. aircraft-quality equalizer cables * Oversized cable sheave diameter reduces cable fatigue * 14-piece standard adapter set * Four triple-telescoping arms * ALI certified
Not Yet Reviewed
$6,195.00
$5,700.00
On Sale
BendPak 4-post lift packages are a deal when working on your car, truck or SUV. These packages vary on what they include in order for you to get the job done. All packages include a 4-post lift with a lifting capacity of 14,000 lbs. and either an alignment kit, rolling bridge jacks, and/or airline kits. Dig in deeper to see what each package includes and get one in your garage or shop today.
Not Yet Reviewed
$17,795.00
$16,895.00
On Sale
BendPak's RBJ25000 rolling bridge jacks offer 25,000 lbs. of muscle meant to service some of the biggest commercial fleets on earth. This jack can be used on your HDS40 four-post truck lift to perform wheel service on almost any heavy-duty vehicle on wheels. The RBJ25000 rolling bridge jacks are over-engineered to handle offset centers of gravity on extremely heavy vehicles. Who might need bridge jacks of this caliber? For one, heavy-duty trucks and buses tend to require a bridge jack rated for more than half of the overall vehicle weight. Generally speaking, if you can safely lift a vehicle with the HDS-40 four-post lift, you can safely perform wheel service with the RBJ-25000 rolling bridge jack. BendPak bridge jacks feature steel contact pads that are built to withstand heavy use. The four steel contact pads on each rolling bridge jack are in place to support both the axel and the lifting points of your vehicle. The jack is low-profile, so the pads fit comfortably underneath low-stance cars. Additional product features: * 25,000-lb. lifting capacity for full wheel service capability * Steel contact pads standard—the jack is low-profile, so the pads fit comfortably underneath low-stance vehicles * Lift to three lock positions for your convenience—the higher the jack, the more undercarriage clearance you get on your HDS-40 four-post lift * Easy-roll wheels * High-pressure hydraulic power unit * Optional airline kit available
Not Yet Reviewed
$5,595.00
$5,150.00
On Sale
Reducing unsprung weight and improving your BMW's grip on the road is what the Dinan Forgeline SE1 Performance wheel sets are all about. They are built to Dinan offsets and sizes to accommodate substantially larger tires without any rubbing or modification of the wheel well. Each wheel is cut from a single solid block of aluminum creating a very strong wheel that is also light in weight. Add to these features the slender spokes of a Motorsport-inspired design gracing each wheel, and you have a winner all the way around. Features and benefits: * Wheels accommodate substantially larger tires for maximum grip and reduction of understeer by bringing the front and rear tire sizes closer together * Aerospace-grade 6061 T-6 forged aluminum for high strength-to-weight ratio * Extreme stiffness and fatigue strength * OE TPMS and lug hardware compatible for ease of installation * Dinan center caps
Not Yet Reviewed
$7,999.95
—
$8,499.95
$7,198.95
—
$7,648.95
On Sale
Ranger professional spray wash cabinets with skimmer will degrease even your filthiest car parts in no time flat. They feature a 50 gallon tank capacity, with larger solution tank to make them even more versatile and productive. An octagonal full-opening door increases access to the turntable to enhance the operator's loading capabilities. Simple operating controls, stainless steel nozzles, a gasket-free door, and a large 70 gpm pump demonstrates Ranger's commitment to enhanced performance and productivity without a single sacrifice in quality. Like all Ranger spray wash cabinets, these professional units with skimmers are built to last. Cabinets and doors are constructed with heavy-duty 12-gauge steel and then coated with an industrial two-step primer and polyurethane finish.
Not Yet Reviewed
$7,395.00
$7,020.00
On Sale
The revolutionary Ranger RL-8500 combination brake lathes use independent DC servo motors to control the cross feed and spindle feed drives, eliminating the need for complex mechanical gear boxes and transmissions typically found on mechanically-driven lathes. The ruggedly built RL-8500 brake lathes are capable of faster, easier, and more accurate rotor/flywheel and drum/flywheel resurfacing than any other brake lathe in its class. Infinitely adjustable feed rates allow you to easily modify cut speeds with the simple turn of a dial. Now you can reduce or increase the cut time for the best finish results, whether you're speeding through an initial rough cut or a single-pass micro-finish. These Ranger lathe packages include the lathe, a sturdy bench and large tool storage backboards, so you can hang all your adapters within close reach. One of the common problems that plague other brake lathes is the vibration and chatter transfer that directly affects the tool-tip and leaves an imperfect cut on the machined surface. The RL-8500 brake lathes by Ranger are specifically designed to address this issue by eliminating the need for gear-driven mechanical drives and variable-speed transmission devices.
Not Yet Reviewed
$9,195.00
$8,720.00
On Sale
The powerful BendPak RBK18000 rolling bridge jacks are made for use with your HD-35 4-post series lift. Sometimes a vehicle's center of gravity isn't in the exact middle of the vehicle. While the 18,000-lb. capacity RBJ18000 jack is capable of handling the weight of many heavy-duty vehicles, some larger trucks, buses, and commercial drivers have significantly offset centers of gravity. Therefore, it's extremely important to ensure your bridge jack is rated for the entire weight of both the front and back axles of the vehicle. The extra lift capacity of this RBJ18000 rolling bridge jack will compensate for a shifted center of gravity in heavy-duty vehicles being raised on the HDS-35 or HDS-40 four-post lift Series. BendPak bridge jacks feature steel contact pads that are built to withstand heavy use. The four steel contact pads on each rolling bridge jack are in place to support both the axle and the lifting points of your vehicle. The jack is low-profile, so the pads fit comfortably underneath low-stance cars. The power unit on the RBJ18000 is strong enough to lift those massive city buses and farm equipment you're raising on your HD-35 four-post lift. A simple foot pedal controls the jack, which reaches its max extension in seconds flat. Additional product features: * 18,000-lb. lifting capacity * Steel contact pads standard—the jack is low-profile, so the pads fit comfortably underneath low-stance vehicles * Different factors change your working height: operator preference, operator height, vehicle clearance, ceiling height and more, with three lock level positions on the jack, your ultimate working height is much more versatile * Easy-roll wheels * High-pressure hydraulic power unit * Optional airline kit available
Not Yet Reviewed
$5,495.00
$5,060.00
On Sale
BendPak HD-973P tri-level parking lifts are a cost-effective way to triple the capacity of typical parking areas, if you have the height available. Used indoors or outdoors, these lifts allow three parking spaces for a single spot. The unique units lack cumbersome mechanisms that project high over the top of the lift, allowing them to be used in more places than a traditional triple-stacker. Several feet of lift structure are eliminated, while maintaining a safe, stable, and revolutionary design. Additional facts and specs: * 7,000 lb. lift capacity for top platform, and 9,000 lb. lift capacity for center platform * Perfect for parking, storage, and service * Ideal for cars, trucks, and SUVs * Platforms feature full-length aluminum decking * Powerful hydraulic cylinders * Heavy-duty 3/8 in. lifting cable * Wide base-plate for maximum stability * Multi-position safety locks in each column * Adjustable lock ladders
Not Yet Reviewed
$21,395.00
$19,685.00
On Sale
Ranger R76ATR tire changers are versatile time-savers. They have tilt-back towers that allow you to work different tire-and-wheel combos without adjusting the duck head, and the swing-arm design with tower assist ensures stiff sidewalls are never a problem. They are easy to operate and rugged enough to stand up to demanding workloads. The large 30 in. capacity turntable features adjustable, hardened-steel RimGuard wheel clamps, providing an internal clamping capacity of 9 in. to 28 in. and external clamping capacity of 10 in. to 30 in. Features: * Traveling drop-center hold-down device * Inflation system * Inflation gauge and air dump valve * Inflation pressure regulator/limiter * Oiler/lubricator * Air regulator * Bead tool/tire iron * Alloy steel mount/demount head * Nylon mount/demount head * Large soap bucket * Soap brush
Not Yet Reviewed
$6,195.00
$5,870.00
On Sale
APR K04.3 GTS turbocharger system converts your 991.2 911 3.0T to the larger factory GTS turbochargers and includes APR's Stage 3 ECU upgrade, making the conversion plug-and-play. Up-to 615 hp and 549 lb.-ft. of torque is available with no other modifications--a substantial increase in power and torque. Expect up to an additional +263 hp and +266 lb.-ft. over stock on the base engine, and +244 hp and +223 lb.-ft. on the S engine. APR K04.3 GTS turbocharger systems features include: * Massive power and torque increase eclipsing GTS model power figures * Direct, bolt-on turbocharger upgrade using genuine and OEM parts * Compatible with all factory hardware including all emissions and fueling * Compatible with most bolt-on upgrades * Up to 649 hp with additional cooling * Genuine Borg Warner turbochargers * Genuine Porsche gaskets and O-rings * Backed by APR's industry leading support
Not Yet Reviewed
$7,199.95
$6,478.95
On Sale
Kooks Headers COMP systems include heavy-duty, crack-resistant headers. They are complete exhaust systems that feature large diameter stainless steel construction with smooth-flowing mandrel-bent tubing. These systems typically include X-pipes, over axle pipes, mufflers, polished or black exhaust tips (some may utilize factory tips), and installation hardware. Kooks Headers COMP systems are offered in three versions: * Off-road (non-catted) for full track use with no horsepower loss and the loudest exhaust tone * Tuner-catted with high-flow catalytic converters with little or no horsepower loss and a deeper exhaust tone * With Kooks ultra-high performance GREENCATS catalytic converters; designed for naturally aspirated and forced induction engines up to 900 hp, they eliminate 90 percent of "Check Engine Light" warnings Note: Kooks Headers COMP systems may not be legal for sale, installation, or use in some locales. Check your state and local laws.
( 1 )
$7,661.06
—
$9,432.41
$7,278.01
—
$8,960.79
On Sale
Reducing unsprung weight and improving your BMW's grip on the road is what the Dinan Forgeline GA1R Performance wheel sets are all about. They are built to Dinan offsets and sizes to accommodate substantially larger tires without any rubbing or modification of the wheel well. Each wheel is cut from a single solid block of aluminum creating a very strong wheel that is also light in weight. Add to these features the great look of slender spokes gracing each wheel, and you have a winner all the way around. Features and benefits: * Forged 6061 T-6 aluminum (aerospace grade) for an incredibly high strength-to-weight ratio and yielding extreme stiffness and fatigue strength ratings * I-beamed Spoke Technology reduces weight and applies additional strength and rigidity within the spokes of the wheel * reduction of nearly 10 lbs. per wheel on most applications * Optimized offsets and sizes accommodate substantially larger tires for maximum grip and reduction of understeer by bringing the front and rear tire sizes closer together * Minimized unsprung mass and rotational inertia for maximum performance and handling * OE TPMS and lug hardware compatible for ease of installation * Utilizes BMW alignment system for easy fitting and alignment when applicable * TUV, JWL, and DOT approved * Generous brake clearance so no matter what big brake kit you may have chances are the forged wheels will support it. * Dinan aluminum center cap
Not Yet Reviewed
$7,999.95
—
$8,499.95
$7,198.95
—
$7,648.95
Modal Header
Truck / SUV
Jeep®
Gifts, Clothing, & More
Restoration
Stock Replacement
Late Model Muscle
Tools
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
