Filters
Clearance
ACDelco Gold turbocharger hoses are specially compounded for use as short, flexible connectors between the turbocharger and components. The hoses are temperature rated from -60 degrees F to 500 degrees F (-51 to 260 degrees C) and are approved for marine applications. These premium aftermarket replacement turbocharger hoses are manufactured to meet your expectations for fit, form, and function.
( 1 )
$644.99
$429.50
Clearance
TurboXS front mount intercoolers give you the massive flow and cooling that you need for your turbo to achieve peak performance. They dwarf the factory intercooler core, offering more than 3 times the volume. Not only is their bar and plate core larger, they're also less restrictive at high-flow rates, resulting in superior cooling and performance. Unlike other aftermarket front mount intercoolers, they allow you to keep factory features and fitment. If you're in the market to increase the performance of your turbo, there's no better way to do it than with TurboXS front mount intercoolers!
Not Yet Reviewed
$1,478.87
$1,109.50
Clearance
Pure Energy remanufactured turbochargers are built to the strictest quality standards, implementing design enhancements that improve durability, efficiency, and power. These stringent testing and evaluation processes assure proper performance and reliability standards are met. Pure Energy turbochargers are supported by a free tech support hotline, staffed by ASE certified master technicians with access to extensive vehicle-specific repair data. Quality enhancements include: * Precise dual plane balancing of turbine shaft and compressor wheel eliminates high-speed vibrations, premature shaft and bushing/bearing failures, and assures quick spool up * New OEM design or upgraded CHRA (Center Housing Rotating Assembly) internal components assure reliability and durability * Thrust plates, seating rings, and journal bearings are strategically designed to withstand internal oil pressure and improve lubrication * Electronic and pneumatic actuator function is tested, calibrated, and adjusted for proper pressure relief and boost functions * Mechanical fastener and tolerance verification—all critical points are measured, gauges, torques, and witness marked * Assembly line and end-of-line testing--multi-computer and mechanical test operations monitor the turbo performance
Not Yet Reviewed
$658.99
—
$1,144.99
$479.50
—
$699.50
Clearance
Adding a blow-off valve to your Can-Am Maverick or Polaris RZR turbo system is a great way to improve throttle response and hear that awesome blow-off valve turbo sound. The purpose of a BOV is not just to sound cool, but it is designed to release the pressure that is built up in the charge side of the system. With nowhere to go, the pressure can cause turbulence to the impeller slowing the spool of the turbo down and causing premature wear. By installing a blow-off valve, you can improve boost response, prolong the life of the turbo, and of course, get that cool swoosh sound! The blow-off valves can be used in conjunction with the stock turbo inlet pipe or any aftermarket turbo hose pipe that has a 1 in. BOV flange. Since the factory valve is a diverter valve and this new valve is designed to be 100 percent vent to atmosphere, a high-temp push-on plug cover is included for the eliminated return hose. The valves are machined from 6061 billet aluminum then anodized in a stealth black finish, and the top is laser engraved with the Agency Power cursive logo and directions for adjusting. When the top of the valve rotates, this allows you to adjust the spring tension for your application. You can set the valve to easily vent off pressure or be stiffer to only vent at maximum psi. Key product features: * CNC-machined aluminum constructions * Anodized black * The top is laser engraved with the Agency Power cursive logo and directions for adjusting * With an ECU tune and higher boost levels, the BOV's can gain 10 to 15 percent more power over stock * Prolongs Turbocharge life * Great blow-off valve sound!
Not Yet Reviewed
$100.00
$69.50
Clearance
These Turbonetics single port wastegate actuators are designed to be bolted up to the T3 swing valve assembly to control an internal wastegate. These actuators are only to be used for 5-10 psi and cannot be controlled upwards of that with a manual boost controller.
Not Yet Reviewed
$118.39
$89.50
Clearance
Turbosmart wastegate replacement components are designed to help you rebuild your wastegate. Over time, your wastegate takes a lot of abuse from heat and pressure and can begin to show wear and lose performance. When this happens, you do not have to replace it--you can rebuild it to work like new again. These Turbosmart replacement components are built to the same standards and specs as your original parts so that your fit and function will be like new again.
( 5 )
$76.95
—
$104.95
$34.50
—
$49.50
Clearance
Garrett turbine housings can restore the efficiency of your turbo. When your housing shows signs of wear and tear, to avoid damage to other turbocharger components and loss of performance, replace it. Garrett offers a considerable selection of turbine housings in different volute types, materials—and in a variety of A/R and flange configurations to effectively direct exhaust gases into the wheel to gain the performance you desire. Whether you're replacing or upgrading, switching inlet/outlet options or changing A/R sizing, you can count of Garrett turbine housings to assist with your engine-boosting power project.
Not Yet Reviewed
$1,156.99
$699.50
Clearance
Garrett GTX Gen 1 Series turbochargers are the posterchild of the company's turbo lineup. These dual ball bearing units have an oil and water-cooled center cartridge. The original GT3582R model paved the way for many performance enthusiasts, earning its place as the best all-around turbo on the market for most peoples' needs. The new billet version makes more power, spools faster, and delivers even better performance. Garrett's ball bearing cartridge has proven its worth in the highest level of motorsports—where it's been the bearing system of choice in CART FEDEX ChampCar Series, 24 Hours of Le Mans, Pikes Peak International Hill Climb, World Rally Championship, and most recently drag racing. These premier racing customers demand no less than the best in durability, reliability, and power-on-demand. One key contributor to this performance lies in the ball bearing cartridge where it is, by design, surrounded by a thin film of oil. The oil film damps out destructive vibrations that would otherwise compromise turbo durability. Turbocharger tech features: * Horsepower: 450 – 700 hp * Displacement: 2.0 - 4.5L * Forged, fully-machined 11-blade compressor wheel * New 8mm ceramic ball bearing cartridge * Ported shroud compressor housing to increase surge resistance * Compressor side: TRIM 58 A/R 0.70 * Compressor air inlet: 4.00 in. * Compressor air outlet: 2.50 in. * Turbine side: TRIM 84 * Bearing housing: Oil and water-cooled system * Turbine housing and actuator not included Note: Garrett has changed the part number on this turbo. The old part number is 803715-5001S and the new part number is 836047-5002S.
Not Yet Reviewed
$2,509.99
$1,899.50
Clearance
ACDelco offers a wide range of Genuine GM parts, including this lineup of intercoolers. A turbocharger intercooler is a mechanical device used to cool the intake air on engines fitted with a forced induction system. These replacement parts deliver the same fit, finish, and performance you would expect from factory originals. The ACDelco intercoolers are available in a full array of sizes for fitment on countless vehicles from the early 2000s and up.
Not Yet Reviewed
$252.99
$108.50
Clearance
ACDelco Gold turbocharger intercooler hoses will fit directly onto your intercooler and engine without any modifications. They connect the piping or turbocharger to the intercooler or engine. These replacement hoses are available in a variety of sizes, configurations, materials, and finishes. Order the model that best suits your application.
( 4 )
$46.99
$17.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
