Filters
Clearance
Stock clutches are made for stock horsepower. Mantic Clutch USA 9000 Series twin disc clutch kits are direct replacement upgrades that can handle 1,010 lb.-ft. of torque capacity at the crank and roughly up to 820 to 850 lb.-ft. at the wheels (capacity will vary with use and type of power adder being utilized). Engineered for serious performance builds, Mantic 9000 clutch kits are the proven answer to transfer all power to the ground and driving your vehicle with a Mantic Twin is easy, pedal effort remains relatively low, with approximately 12 to 15 percent increase over the OE clutch pedal feel. Available for many applications, Mantic Clutch 9000 Series twin disc clutch kits with their ceremetallic friction material and all billet construction make them the best for severe duty yet street friendly. Features and benefits: * SFI approved 1.1 * All billet construction * No Flex at high rpms * High-torque capacity * Lightened flywheel revs quicker compared to heavier OE flywheels * Completely rebuildable—modular construction makes service easy * 9 in. twin disc clutches reduce Moment of Inertia (MOI) for quicker more precise shifts * Ceremetalic friction material offers more heat resistance * OE hydraulic release bearing * All necessary hardware * Cover and components machined from billet stock adding strength and durability
( 2 )
$2,245.00
—
$2,285.00
$1,854.50
—
$1,887.50
Clearance
Built from racing traditions, Performance Automatic's 11 in. converters are built to take the punishment. Fully furnace-brazed with extra bearings and balanced to provide years of dependable service, these are the famous 11 in. converters that are Performance Automatic's hottest selling street/strip converters. Designed to give approximately 1,000 rpm stall over a stock converter, these units will provide greater launch and low-end power. They are designed to withstand the punishment of full-throttle starts. Features include: * Balanced * Needle bearings * Approximately 2,000-2,800 rpm stall * Bolt-In * Fully streetable * Super launches
Not Yet Reviewed
$603.89
$449.50
Clearance
American Powertrain manual transmission bellhousings are designed to properly mate your transmission to the engine block. They feature all-new CNC-machined aluminum castings for tight tolerances and a precision fit. The bellhousings are available for different engines and transmission styles. Order the model recommended for your application.
( 25 )
$347.99
$261.50
Clearance
Motive Gear is the leading manufacturer of driveline products for just about any vehicle, whether it is a stock daily driver or a full-competition 4x4 or race car. They are proud to offer an unmatched selection of quality components engineered and manufactured for the vehicle and for the way it is driven. Motive Gear ring and pinion sets are engineered to meet or exceed OEM specifications at a price that won't break your budget. Their broad selection of ring and pinion ratios is available for just about every vehicle made from the 1940s through the present. All Motive Gear products meet strict quality standards through advanced manufacturing techniques and are backed by their strong warranty. Their in-house quality control lab utilizes state-of-the-art equipment to continuously check Motive Gear products for strength, tolerance, and hardness. Only after meeting stringent quality standards are Motive Gear products packaged and ready for delivery.
( 281 )
$271.99
$182.50
Clearance
ACDelco GM Genuine Partst automatic transmission wiring harnesses are a GM recommended replacement for your vehicles failing component. They are manufactured to provide you with the same performance, durability, and service life you expect from General Motors.
( 1 )
$156.99
$140.50
Clearance
ACDelco GM Genuine Parts CV joint boots protect your CV joints from destructive dirt and moisture. A common cause of CV joint failure is cracks in the CV boot. When the boot is cracked, it allows dirt and grit to mix in with the grease and wear down the parts of the joint. CV boots should be replaced as soon as cracking is visible in their rubber folds. These factory-recommended replacements will provide the same performance, durability, and service life you expect from General Motors. Order the boots designed for your application.
Not Yet Reviewed
$106.99
$95.50
Clearance
Nitro Gear and Axle ring and pinion gear sets are manufactured from 8620 steel gear forgings, with a specialized process making them the toughest, quietest gears on- or off-road. By using better materials, better CNC precision-machining, and better lapping/heat-treating processes, they can ensure excellent contact patterns, plus a strong, long-lasting setup. Each new product is subjected to multi-point inspections and then actually installed and set up by Nitro's own in-house differential experts to assure excellent fitment and easy setup. Order the Nitro Gear and Axle ring and pinion set recommended for your application.
( 1 )
$240.00
—
$419.99
$149.50
—
$299.50
Clearance
BCA Bearing by NTN wheel bearing and hub assemblies are premium OE-quality units with application-specific design and engineering for reduced noise, vibration, and harshness, as well as extended life. BCA Bearing by NTN wheel bearing and hub assemblies will include one of their superior Gen 1, Gen 2, and Gen 3 hubs—high-quality wheel end replacement parts for domestic and import vehicles.
( 10 )
$66.99
—
$430.99
$42.50
—
$351.50
Clearance
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
Not Yet Reviewed
$1,168.99
$879.50
Clearance
Turbo Action gate plates are a bolt-on option to convert your standard-pattern Cheetah shifter. They will allow the use of reverse-style transmission valve bodies.
( 2 )
$71.99
$49.50
Clearance
If you wheel hard or are involved in competition, Nitro Gear and Axle Excalibur Competition U-joints are must-haves. Constructed of a heavy-duty forged cross joint and hardened caps, these axle joints are greasable and include full circle retaining clips for positive engagement of the caps. Instead of conventional needle bearings, which can be crushed or break under extreme loads, Excalibur Competition joints feature a proprietary bushing material that can survive under extreme pressure. Because of their design, they are not recommended for highway speed and should only be used on applications that are equipped with locking hubs if the vehicle is driven on the street. Available for popular front axle shaft joints, the Excalibur joints replace conventional 297X and 760X Spicer joints, as well as larger 806X and 733X joints. If your method of four-wheeling is considered extreme, then Nitro Excalibur should be your U-joint choice! They are available individually or in pairs. Features: * Precision-machined from proprietary billet material * No needle bearings to crush * Full circle snap rings * State-of-the-art heat-treating process, surface-hardened trunnion to prevent galling * Serviceable
Not Yet Reviewed
$270.00
$203.50
Clearance
Ace Racing PowerForce dual-disc clutch kits utilize a patented technology that offers drivers increased clutch performance without increasing clutch pedal effort. These assemblies draw upon nearly two decades of experience designing and producing ultra-high performance drag racing clutches for NHRA racers. The street/strip kits are available for a wide variety of specific vehicle and engine applications. Additional details: * Flywheel included in kit * Patented lever-assist technology available * 2 disc setup * Ceramic friction capable of 1,500 lbs.-ft. of torque * 2 sprung hubs * Lightweight design and low MOI unlock potential HP * No break-in period required * Near stock pedal feel * Noise/vibration reduction components What's in the box? * Clutch assembly * Aluminum flywheel * Alignment tool * Shim kit (if applicable) * Pilot bearing * Release bearing (if applicable) * Mounting hardware * Installation instructions
Not Yet Reviewed
$1,783.95
$1,299.50
Clearance
Nitro Gear and Axle realized the difficulty and time involved in trying to compile a list of individual parts required for a gear change. To make it easier for everyone—from the DIY gearhead to the pros—the experts at Nitro introduce an industry first: front and rear gear package sets! Each combo package is comprised of the necessary components for your vehicle to reduce wear on the transmission, and provide more power and fuel economy for those over land trips with all your stuff. So, if your vehicle is suffering from poor performance and reduced fuel economy resulting from over-sized tires, a Nitro gear change will help restore the attributes you desire! Order the front and rear gear package designed to fit your vehicle, case design, and axle application.
( 2 )
$1,250.00
—
$1,475.00
$999.50
—
$1,109.50
Clearance
BCA Bearing by NTN tapered roller bearings are for light- and medium-duty applications. These bearings go through a case carburization process that creates bearings with a hard, wear-resistant outer shell and a tough ductile core. BCA Bearing by NTN bearings are precision-engineered from quality materials to provide optimal performance and durability. Tapered roller bearings feature: * Carburized surface layer (case carburization) on rings and rollers * Excellent shock resistant properties * 40 percent longer life compared to through hardened product offerings * High-capacity for radial, axial, and combined loads * Common applications: Transmissions, engines, differentials, wheel end, and transfer cases
Not Yet Reviewed
$12.99
—
$39.99
$7.50
—
$30.50
Clearance
Turbo Action offers all of the replacement parts that you need for your automatic shifter. From gate plates to installation kits to decals, Turbo Action has you covered.
( 3 )
$16.99
$11.50
Clearance
Nitro Gear and Axle Pro Gear ring and pinion gear sets are manufactured from 9310 forgings for maximum strength in competition/race vehicles. They are not intended for daily use as they have a shorter life span relating to their wear characteristics. The cut on these gears is engineered for maximum strength, often resulting in significant noise compared to traditional gear sets. Further enhancements and specialty parts may be required. Order the Nitro Gear and Axle Pro Gear ring and pinion set recommended for your competition/racing application.
Not Yet Reviewed
$1,449.99
$999.50
Clearance
ACDelco Gold automatic transmission fluid filters can help to ensure the reliability and performance of your automatic transmission. These filters trap impurities that may be present in the fluid before they get pumped through to the moving components of your transmission, thus avoiding damage. On-time maintenance can extend your transmission's life and keep it operating efficiently. Perform service with ACDelco Gold automatic transmission fluid filters.
( 46 )
$5.99
—
$36.99
$5.50
—
$29.50
Clearance
Timken needle bearings offer the best in friction management. They're machined and ground from premium materials to present high-strength and long-lasting service in your project. Hundreds of needle bearing options are available for fitment on countless vehicles. Choose top-quality bearings from a name you can trust—Timken.
( 2 )
$36.99
$25.50
Clearance
ACDelco GM Genuine Parts includes all the automatic transmission rebuild components you need to return your tranny to optimum performance. They are designed, engineered, and tested to rigorous standards, and are backed by General Motors. From the smallest to the biggest pieces, you can trust reliable ACDelco parts to restore, repair, and renew your GM.
( 13 )
$3.99
—
$17.99
$3.50
—
$11.50
Clearance
Hengst offers automatic transmission filters for a wide range of vehicles, including European models from Audi, VW, Mini Cooper, BMW, Porsche, Mercedes-Benz, Lexus, Toyota, and Mazda. The direct-fit replacements are made from factory materials and specifications to ensure proper fit and performance. These filters collect any contaminants in the lubricating fluids, such as dirt and debris, preventing them from being sent into the transmission. As the transmission grows older, general wear and tear may cause metal shavings to invade the transmission fluid, as well. Most filters come with a gasket or O-ring seal. Order the model recommended for your application.
Not Yet Reviewed
$13.99
—
$51.99
$8.50
—
$44.50
Clearance
AutoExtra pinion bearings are low-cost quality replacements to fit your OE needs. Bearings wear out, and that noise coming from your differential is warning you of possible failure. Heed the warning and change out your worn pinion bearings with updated models from AutoExtra—the right fit your ride and your wallet. They're available for an exhaustive list of car, truck, and van applications.
Not Yet Reviewed
$13.99
$11.50
Clearance
Nitro gear and axle solid pinion preload spacers increase the durability and integrity of your setup by eliminating the use of a crush sleeve. Once you set the preload, it will not change—allowing you to swap yokes or seals in the future without worry of over-torqueing the factory crush sleeve. With one of the widest selections of solid preload spacer kits around, Nitro is sure to have something to fit your application.
( 4 )
$40.50
Clearance
Keep your FWD/AWD front axles perfectly aligned with ACDelco replacement axle housings. Cracked or warped housings can lead to excessive transmission or wheel bearing wear, as well as damage the axle splines. Order the model recommended for your application.
( 1 )
$328.99
$214.50
Clearance
Sonnax flanged yokes will complete your driveshaft connection. These high performance 6061-T6 aluminum parts are precision-machined to be stronger than the original cast steel yokes, as well as being lighter in weight. Sonnax builds these yokes for exceptional balance and superior craftsmanship, for a show-quality driveline.
( 20 )
$79.06
$39.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
