Filters
These Mallory Unilite distributors give you accurate, maintenance-free ignition timing. Instead of old-fashioned points systems, they have photo-optic, LED-triggering systems that never vary or wear out. You get increased rpm potential, improved combustion, longer spark plug life, and better cold-weather starting. Hooking one up is a simple 3-wire connection, and they come with your choice of adjustable mechanical and/or vacuum advance, self-lubricating bushings, and a Super-Duty cap and rotor.
( 52 )
$437.95
—
$574.95
Mallory Comp Pump Series electric fuel pumps are ideal for high performance street or race applications. They have a high-quality, permanent-magnet 12 V electric motor and feature factory-set base pressure. Intended for gasoline use, each pump assembly features a quiet, high-efficiency Gerotor design that provides stable output. The housings are fully machined and have a special design that allows for some adjustment of the output pressure. All Comp Pump Series fuel pumps must be used with a fuel pressure regulator. The pumps are available in many different ratings, from 60 to 500 gph, with fuel pressure ranging from 4 to 100 psi. They're perfect for any carbureted or fuel injected engine.
( 32 )
$331.95
—
$637.95
These Promaster Classic series ignition coils from Mallory are designed to meet today's specialized ignition requirements. These coils feature a faster rise time and increased spark duration (compared to stock) to increase performance. They have a glass-filled polyester case and oil-filled construction to ensure a long life and no energy loss from arcing. This series also offers better wire retention with a spark plug type secondary post, and brass contact terminals.
( 42 )
$186.95
On Sale
Mallory Pro Sidewinder spark plug wire sets are the company's most advanced wires. Their special construction provides the RFI suppression needed for electronic ignition, radio, and computer operation without interference—and at the same time allows the type of ignition system performance previously available only with Mallory Pro wires. The high-temperature silicone jackets can withstand more than 500 degrees F. Pro Sidewinders are available in ready-to-use sets cut for specific applications, or extra-long universal sets. Features: * Low 300 ohm resistance spiral core delivers high energy output for maximum spark at the plug * Great RFI suppression meets the demands of today's on-board electronics, such as electronic ignition, sound systems, and computer controls * 8mm ozone-resistant red silicone jacket repels water, oil, grease, and fuel—and withstands temperatures up to 500 degrees * Available in ready to install kits for various applications or universal V8 kits
( 31 )
$153.95
$113.86
—
$188.95
When using high-pressure fuel pumps, a fuel pressure regulator must be installed to prevent carburetor flooding. Mallory fuel pressure regulators feature housings fully machined from 6061 T-6 billet aluminum, and specially designed high-flow fuel passages. Combined with a quick-acting diaphragm assemblies, it makes them extremely efficient. A mounting bracket is provided to allow quick and easy mounting.
( 8 )
$220.95
Mallory circuit guards combine the protection of the Mallory active power filter from power spikes and surges and other electrical "noise," with the negative spike protection offered by the Mallory power cell. They are designed to plug right in and can even be mounted directly on most distributors. These circuit guards offer great protection for all Mallory UniLite, MBI, and E-Spark modules.
( 12 )
$117.95
Mallory Replacement Ignition Modules are designed to replace the malfunctioning module. They are direct replacements for the modules provided in Mallory distributors and conversion kits. With an easy three-wire hookup, these modules will have your vehicle's ignition working great in no time.
( 112 )
$127.95
These Mallory E-Spark conversion kits are just what you needed to replace those old points and update your ignition system. They eliminate the pesky problem of constantly having to change and adjust points. These kits include all parts that fit inside the stock distributor cap, so everything is self-contained and looks original from the outside.
( 25 )
$147.95
Now you can retrofit your earlier distributor-equipped Big Twin or Sportster for the modern world with ACCEL Mallory E-Spark distributors. With E-Spark distributors, you'll have faster, easier starting with drop-in installation and no removal of the stock heads. These machined billet aluminum E-Sparks have a fully adjustable mechanical advance and can be used with kick-start applications. Update your ride and enjoy the benefits of these ACCEL Mallory E-Spark distributors.
( 1 )
$677.95
Mallory HyFire V ignitions offer a modern twist on a familiar name! Needing no introduction, the HyFire ignitions feature modern electronics ready to deliver a powerful punch packed inside retro-style cases. These capacitive discharge ignitions supply multiple sparks at low rpm for a clean idle and quick throttle response. And since the HyFires provide powerful spark through redline, a built-in adjustable rev limiter will help tame your beast in case of a missed shift or driveline failure. The rev limiter is adjustable in 100 rpm increments with easily adjustable rotary dials. Features include: * Modern capacitive discharge ignition technology * Retro design for classic good looks * Connects easily to points, amplifiers, and magnetic pickup distributors * Adjustable rev limiter for over-rev protection * Multiple sparks at low rpm for improved starting, clean idle, and snappy throttle response
( 11 )
$263.95
On Sale
Convert your OEM-style breaker points and condenser to the more reliable Unilite ignition from Mallory. These self-contained units have no moving parts to wear out, so they provide many years of trouble-free service. Simply replace the points with the Unilite module, which consists of a photo coupler, signal processor, and power switch. Each time the shutter wheel stops the infrared light from reaching the photo coupler, the electronic circuitry energizes the ignition coil. When the shutter wheel allows the light to reach the photo coupler, the stored energy in the coil discharges. These kits can drive both OEM and high-performance ignition coils, and are designed for 12 V negative ground systems.
( 5 )
$176.95
$134.95
—
$155.72
Bring your Comp Pump back to life with genuine Mallory fuel pump service part kits. From seal and repair kits to brush kits, Mallory has the parts that you need to put your fuel pump back into action.
( 13 )
$145.95
Mallory Marine electric fuel pumps deliver a constant flow of gasoline to the engine to help prevent vapor lock. They are manufactured from quality materials and components to ensure increased durability and longer life. The fuel pumps are available in a variety of configurations to fit your specific marine engine application.
( 1 )
$278.95
Mallory universal fuel pressure regulators for fuel injection feature CNC-machined billet aluminum construction and a special quick-action diaphragm design. Flow-matched inlet and outlets provide perfect pump matching, and enable you to fine-tune the fuel injection for maximum performance. These units also offer a built-in fuel pressure port, and built-in pressure compensating for supercharged or turbocharged engines. Fully serviceable, Mallory regulators are available for high- and low-pressure applications, for use with gasoline or alcohol/methanol.
( 5 )
$269.95
On Sale
Mallory constructed these distributor caps from innovative, space-age plastic. Mallory distributor caps combine the high dielectric strength required for today's high-energy ignition systems with highly impact-resistant qualities to prevent damage.
( 101 )
$77.85
$73.96
—
$109.95
These bronze distributor gears from Mallory are recommended for steel billet mechanical roller tappet cams and slot hard-faced steel billet mechanical flat tappet cams. Bronze gears absorb the increased wear in special cams and magnetos and are easily replaced before costly damage to the camshaft gear occurs. The gears are precision-machined from the highest quality aluminum silicon bronze alloy for maximum durability. Bronze distributor gears must be checked often and replaced as needed.
( 1 )
$117.95
Now you can retrofit your earlier distributor-equipped Big Twin or Sportster for the modern world with Mallory E-Spark distributors. With E-Spark distributors, you'll have faster, easier starting with drop-in installation and without any engine disassembly when used with stock cylinders and heads. These machined billet aluminum E-Spark distributors have a fully adjustable mechanical advance and can be used with kick-start applications. Update your ride and enjoy the benefits of these E-Spark distributors from Mallory.
Not Yet Reviewed
$677.95
Mallory designed, engineered, and race-tested the original point distributor over 65 years ago. New materials and technologies have enabled Mallory to improve the performance and reliability of its basic design for performance engines. Their distributors incorporate features not found in conventional, remanufactured, or replacement distributors, with the added benefit of stabilized contact point sets that increase coil output by 50 percent. They have adjustable mechanical and/or vacuum advance, heavy-duty points for an increased rpm range, self-lubricating bushings, and Mallory's Super-Duty cap and rotor with brass terminals. The result is maximum performance at any rpm.
( 2 )
$499.95
Modal Header
Truck / SUV
Jeep®
Gifts, Clothing, & More
Restoration
Stock Replacement
Late Model Muscle
Tools
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
