Filters
TCI Super StreetFighter transmissions bridge the gap between the StreetFighters and full Competition series transmissions. Like the StreetFighter units, these are equipped with 100 percent tested, manual/automatic valve bodies. That means that most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a racetrack shift that bangs through the gears and shaves time off your ETs. When you use the manual gear selection feature, the Super StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, the transmissions retain positive automatic shifts, for the ease of driving you look for in an automatic transmission.
( 50 )
$2,082.95
—
$3,478.95
Bring out the performance of your 4x4 with these Maximizer transmissions from the folks at TCI. Four-wheel drive vehicles are tough on automatics, especially with the addition of a lift kit and larger tires. Maximizer transmissions are built with that in mind. Each one is assembled with the strongest components available and designed to provide crisp shifts, time and time again. They give you all of that, and they'll deliver long and dependable service, too.
( 28 )
$2,280.95
—
$2,345.95
For hauling heavy loads or for taking a trip across the country, TCI heavy-duty RV transmissions were designed with you in mind. They're built for strength, and they'll provide long, dependable service, as well as delivering maximum fuel economy. They have special valve-body modifications that increase fluid flow and improve shift characteristics, without the harsh feel of racing transmissions; and they include a low-gear package for pulling heavy loads.
( 3 )
$2,216.95
—
$2,551.95
TCI StreetFighter transmissions are durable enough to withstand the rigors of even the toughest street machines. Equipped with a manual/automatic valve body, most units allow you to manually shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a race track shift that bangs through the gears and shaves time off of your ETs. When you use the manual gear selection feature, the StreetFighters upshift and downshift right when you move the lever, with no lag or governor override. When you select the normal drive position, they retain positive automatic shifts for the ease of driving you look for in an automatic transmission.
( 148 )
$2,024.95
—
$3,375.95
Racing is for pros--FTI Pro Series Powerglides! Their Level 3 units, like all the Pro Series transmissions, house the greatest advances in racing technology. They are fitted with FTI engineered valve bodies and spiral springs--they will not creep when the brake is set. And they are in-house CNC-machined and hand assembled to ensure every clearance is set to exacting tolerances. Level 3 Powerglides are designed and built for racers on a budget that need an unbreakable unit that can handle the rigors of their high performance engine in any extreme environment. Every transmission is dyno-tested to confirm they are race-ready and bulletproof. No wonder they are the choice of champions, shouldn't they be yours, as well? FTI Performance Pro Powerglide Level 3 transmissions feature: * 1.80 straight-cut gear planetary * 300m input shaft * Lightened steel clutch hub * 6-clutch drum * Race-prepped stock case * High-flow pump * Deep aluminum pan * Pro Tree transbrake * Billet dual ring servo * 4340 output shaft * 2-piece shift lever
( 4 )
$2,779.00
—
$3,159.00
Think you have to drain every last penny from your bank account to get a quality transmission? Think again. Our Summit Racing™ performance transmissions have been manufactured with all-new, high performance components. Features include a high-volume pump, performance clutches and steels, a recalibrated full manual trans-brake valve body, heavy-duty sun shell, deep aluminum pan, and high-quality seals and gaskets. You get all these quality upgrades, plus reliable performance from Summit Racing™ performance transmissions.
( 1 )
$2,708.99
—
$4,999.99
FTI Performance TH400 Level 4.5 transmissions begin with a race-prepped factory Chevy case—and end up rated up to 1,100 hp. Each professionally hand-built case includes a short shaft, a billet aluminum drum and forward clutch hub, a 34-element sprague, and race material clutches. An FTI billet aluminum trans-brake with a full manual reverse valve body is stout enough to handle major power and keeps reverse and first gears closely knit. The included deep aluminum pan allows more fluid capacity for increased cooling, while the 300M input shaft provides amazing strength. Whether you're racing off-road, on the street, or at the track, FTI Performance TH400 Level 4.5 transmissions fit the bill. Order the model best suited for your application.
Not Yet Reviewed
$3,319.00
Silver Sport EasyFit transmission kits are designed to be the perfect start to your TREMEC TKX installation. The kits are tailored with a vehicle-specific shifter position and components to make your installation easy and less costly. Features and specs: * STX Shifter--short throw shifter (depending on kit) * Transmission mount, reverse light harness, pilot bushing, and required hardware * 5-speed pattern shifter ball or 5-speed shift pattern console plate (depending on kit) * EDP coated, steel crossmember (depending on kit) * Gear ratios--2.87, 1.89, 1.28, 1.00, 0.68, 2.56R * 600 lb.-ft. torque rating * 26-spline count input shaft * Quality-tested with a 12-month factory warranty
( 3 )
$4,095.00
—
$4,495.00
American Powertrain ProFit Tremec TKX manual transmissions and installation kits put the power to the pavement with unmatched durability and versatility. Tremec has normally sourced their aftermarket transmissions from the OE side, such as the Magnum T-56 and the T-5, but this new design is made from the ground up as a strictly aftermarket transmission. Designed to fit classic muscle cars and customs, the TKX has a tighter, more streamlined case, and features 600 lbs.-ft. of torque capacity and are capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. The compact design provides clearance in most transmission tunnels without floor modifications, while case strength has increased from previous models with the new 3-piece aluminum housing and gaskets at all flanges simplifies installation and eliminates fluid leaks. Additional features include: * Designed with your specific vehicle application in mind * Available with multiple gear ratio configurations for compatibility for multiple applications with three shifter locations * Multi-cone synchronizers and synchronizer rings are made of sintered bronze and carbon for superior shifts * All gears are supported by caged needle bearings to reduce end play * Gears and shafts are made from ASTM 4615 grade steel and provide increased torque carrying capacity * TKX manual transmissions have 31-spline output shafts for added strength, built-in reverse light switches, and cruise control safety switches * The TKX also has separate GM and Ford case patterns and input configurations—with integrated GM and Ford transmission mount patterns * Installation kits include a driveshaft slip yoke made from cryogenically hardened steel, a polyurethane transmission mount, a steel roller pilot bearing, and a reverse light wiring harness
( 1 )
$4,095.95
—
$4,559.95
Currie 9 in. crate rear end assemblies offer a direct-fit, bolt-in solution for most common car, truck, and Jeep platforms. They feature larger spline axles, heavy-duty components, and internals from leading manufacturers. These axle assemblies are built to exacting standards matching factory specifications for suspension mounting points, pinion location, overall axle width, and wheel bolt pattern for hassle-free installation. Prior to shipping, skilled craftsman meticulously assemble essential parts to deliver years of trouble-free operation for your vehicle. They offer a broad range of gear ratios, performance differentials, or even a spool—if that's your thing. You'll be ready in no time for cruising, racing, off-roading, or just daily driving with Currie 9 in. crate rear end assemblies. Order the kit designed to fit your specific model.
( 4 )
$4,000.00
—
$5,300.00
Detroit Speed Ford 9 in. QUADRALink axle housings are great beginnings to a strong finish. Detroit Speed housing features and benefits: * Heavy-duty round back housing * TIG-welded 3 in. tubes with .218 wall thickness * Billet Torino ends * QUADRALink brackets are TIG-welded * Axle vent * Fill and drain plugs included * Available in bare finish or satin black powdercoat * Accepts 2.5 in. offset rear brake packages from AP, Baer, or Wilwood
Not Yet Reviewed
$2,099.95
FTI Performance TH400 Level 4 transmissions feature a full manual valve body equipped with a transbrake for the ultimate drag racer. They make an excellent choice for weekend bracket racers, high-powered street cars, and mud trucks. The transmissions have: a 34-element intermediate sprag, performance clutches and steels, high-flow pump, race-prepped stock case, deep aluminum pan, billet forward clutch hub, heavy-duty intermediate retainer, and a 4-clutch intermediate pack. Some models are compatible with Ultra Bell bellhousings.
( 12 )
$2,779.00
Whether you drive a sand dragger, hill climber, or tractor puller, TCI has the transmission for you. The competition line of full manual 4x4 transmissions is built following the same specifications TCI uses in building thousands of drag race units. Applications are also available with trans-brake valve bodies.
( 1 )
$2,297.95
Hughes Performance Street and Strip transmissions are made tough enough to deliver tire-spinning shifts race after race. They include internal and external racing components, which increase strength, reliability, and torque capacity. Plus, they feature Hughes' manual/automatic valve body to provide precise manual or fully automatic shifting. Choose the transmission type best suited for your vehicle.
( 30 )
$2,339.99
—
$2,874.99
TCI 4x Four-Speed GM automatic transmission packages for externally balanced small block Fords allow you to bolt up your Ford engine to TCI's 4x Four-Speed electronically controlled 4L80E-based transmission or their non-electronic 700R4-based transmission. Bolting right up to your engine like a stock transmission, they make it easy to adapt either of these proven transmissions to any compatible engine by including the exact bellhousing, a special adapter flexplate, pilot adapter, dipstick, and other accessories in a complete package. The 700R4-based transmission uses a Constant Pressure Valve Body to eliminate the need for careful TV cable tuning, the most common cause of 700R4 transmission failure. If you choose the 4L80E-based 4x transmission, these controls are handled electronically by your choice of the TCI EZ-TCU, TCU 2.0, or a factory GM transmission controller. All 4x Four-Speed transmissions are automatic overdrive 4-speeds with lock-up, so simply choose the one that fits your power level.
Not Yet Reviewed
$4,254.95
—
$5,488.95
TCI Competition transmissions are designed to take the abuse of drag-racing competition. They're available with full-manual and trans-brake setups and retain no automatic shift features. They feature special heat-treated races and sprags, high-performance clutches and bands, and improved lubrication. TCI blueprints and modifies these transmissions for maximum performance, then dyno tests and pressure tests them. So you can concentrate on winning the race!
( 31 )
$2,024.95
—
$3,542.95
Advance Adapters offers an AX15 5-speed transmission retrofit adapter kit for 1966-77 Bronco Dana 20 applications. The adapter kit comes complete with the conversion components required to retrofit your early Ford Bronco with the Aisin AX15. Kit includes: * New AX15 transmission * Transfer case adapter and transfer case shifter linkage bracket (T-style shifter only) * Transmission to engine adapter * Clutch disc * Crossmember mount kit * Shifter handle * The Transmission: This transmission is manufactured by Aisin Warner. The overall transmission case length is 24.000 in. The output shaft on this transmission is 23-spline and protrudes approximately .400 in. This transmission is normally found coupled to the AMC 4.0L 6-cylinder engine and seems to be one of the better transmissions Jeep used—very capable of handling the horsepower and torque of a V8 engine. * The Vehicle background and specs: The early Ford Broncos have always been a popular vehicle for conversions. These vehicles were normally equipped with a 6-cylinder or V8 engine up to a 3-speed transmission. On this transmission, Ford used two different lengths of adapter housings when coupling this 3-speed to the stock transfer case. The adapter housing is either 6 1/2 in. or 9 3/8 in. Vehicles equipped with a V8 had a 9 3/8 in. tailhousing which set the bellhousing further into the engine compartment. Vehicles with the 6-cylinder had a 6 1/2 in. tailhousing. This shorter adapter compensated for the longer engine. In 1973, Ford began offering the C4 automatic. A special tailhousing and output shaft was manufactured to couple this transmission to the stock transfer case. Ford no longer makes the C4 adapter. The 1966-77 vehicles were equipped to a Bronco Dana 20 transfer case. This transfer case, unlike the Jeep Dana 20, has the front driveshaft on the driver's side of the vehicle. The input gear of this transfer case is 6-spline. Ford always used a spud shaft that coupled this 6-spline transfer case to the transmission 28-spline. The transmission-to-transfer case adapters used both a dowel pin and alignment retainer. The spud shaft is supported in this retainer with a bearing. Advance Adapter adapter kits utilize this type of design. In some applications, the stock spud shaft is also retained. This transfer case has a 2.46:1 low gear ratio. In early 1973, Ford switched to a 2.34:1 low gear ratio. These transfer cases used two different shifter designs known as either the "J" pattern or "T" handle. The "T" handle was used from 1966 to 1972, and the "J" pattern from 1973 to 1977. The "T" handle shifter is a fairly simple shifting mechanism; and to retain it with an adapter only requires a pivot point for mounting. The "J" shifter requires the shift handle to be mounted in a location relatively close to its stock position. Retaining this shifter is hard to accomplish when adapting the various transmissions to the Dana 20. Vehicle owners with a "J" shifter are advised to either change the transfer case shifter rods and go to a "T" style shifter, or to contact one of the Bronco specialty shops that offer a twin stick replacement for the "J" shifter. A twin stick shifter replacing the "J" style should work with most of Advance adapters. Advance Adapter housings normally utilize the stock Bronco crossmember with the stock rubber supports. On new transmission assemblies longer than stock, this crossmember may need to be relocated. There are a few adapters that require this crossmember to be modified. These modifications are noted in detail on the specific adapter instruction sheet.
Not Yet Reviewed
$3,136.35
TCI Circlematic automatic transmissions are great for oval track use. However, despite the sound of their name, they also can be used for performance marine applications. All transmissions feature high performance clutches, a steel clutch hub, and a modified planetary gear set that will work with the latest rear suspensions. Many specialty combinations are available.
Not Yet Reviewed
$2,177.95
—
$3,013.95
McLeod 4400 Series truck pull clutch kits are ideal for truck puller and high-horsepower sand drag applications. These discs are specifically designed for non-shifting motorsports and not intended for street use. To dominate the competition, you need performance engineered driveline components like the McLeod 4400 Series clutch system designed for your specific application. Product features include: * Borg & Beck pressure plates with counterweights * High-rpm lock-up capacity * Steel flywheel and sintered iron discs
Not Yet Reviewed
$2,055.04
—
$2,255.00
RAM Pro Street dual disc clutch kits are precision-balanced for smooth operation—and come equipped with a billet cover for optimum release length, a comfortable pedal effort, and a high diaphragm finger position for excellent high-RPM shifting capability. The sprung hub top disc absorbs shock and reduces driveline noise. Pro Street kits are available with your choice of an organic friction disc or a metallic disc. Organic disc models are capable of handling 500 to 800 hp; the metallic disc models can handle between 600 and 1,200 hp. RAM Pro Street dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the clutch recommended for your vehicle and engine application.
( 1 )
$2,159.00
These Quarter Master Optimum-V clutch and bellhousing kits have everything you need to get your car rolling at the track. They use an Optimum-V clutch unit featuring a 6-leg design with gas slots for maximum cooling, integrated wear pins that hold clearances for longer cover life, and an innovative, one-piece aluminum open cover for maximum durability. They also offer the industry's lowest moment of inertia for a metallic-style clutch. The clutch includes bronze sintered metallic frictions for maximum heat and wear resistance. Quarter Master Optimum-V clutch and bellhousing kits are available in your choice of 5.5 in. or 7.25 in. diameters, in either 2-disc or 3-disc configurations, and are racer-rebuildable. The kits also include: * Quartermaster Ultra-Duty reverse rotation starter * Steel ring gear * Fixed mount hydraulic release bearing * Flywheel bolts * Starter bolts with clutch inlet * Bleed line kit * Available with aluminum or magnesium bellhousing
Not Yet Reviewed
$3,151.56
Summit Racing™ combines quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands—plus a hardened sunshell. Other features include a rebuilt front pump, a street performance valve body, and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.
( 49 )
$2,999.99
—
$5,299.99
XClutch Stage 1 clutch kits offer a variety of performance upgrades for both street and track applications. They are designed in-house and normally utilize a single plate organic, ceramic, or carbon friction disc along with an upgraded factory-style pressure plate. XClutch kits utilize a similar mechanism to the factory clutch, making them ideal enhancements for most vehicles with low to mid-level performance modifications. Stage 1 clutch kits are available in three distinct performance clutch packages—sprung, rigid solid, and steel-backed organic. Features and benefits of each: * 1A sprung organic—this range has been specifically designed for street vehicles that have minor engine and general performance modifications. These kits offer a sprung organic friction disc that allows for great drivability, while offering improved clamping force through the use of a performance pressure plate. * 1G rigid solid organic—with a rigid center version of the organic disc, this range is ideal for street vehicles and light track use. These kits are often available with a lightweight alloy pressure plate and performance flywheel. * 1T steel-backed organic--this range offers a higher burst strength by bonding the organic friction material directly to a steel backing plate. These kits are ideal for high performance vehicles used on the street with occasional track use.
( 5 )
$2,041.43
American Powertrain Tremec T-56 Magnum manual transmissions and installation kits are designed to withstand up to 700 lbs.-ft. of torque. Their gears feature substantially increased face widths and 2-piece laser-beam welded construction, allowing for greater control of the tooth angles, pitch, and alignment. The transmissions also include a bolstered one-piece countershaft to resist distortion, and a stronger input shaft. Magnum's new synchronizers are built with fine-tooth angles, redesigned shift forks—and an extensively modified transmission case to prevent leaks under high-stress conditions and increase overall power-handling capabilities. Nearly two dozen models are available; choose the kit recommended for your vehicle application. Kits include: * Cryo-hardened steel driveshaft slip yoke with 1330 style U-joint * Mechanical speedometer conversion * VSS wiring harness for electronic speedometer of EFI ECU * Reverse light wiring, weather seal harness, non-polar * Reverse lockout wiring harness * ISO-X ballistic, low-profile transmission mount * Steel roller pilot bearing * White shift knob with black 6-speed shift pattern
Not Yet Reviewed
$4,750.95
—
$4,895.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
