Filters
On Sale
Rock your rig with Trail-Gear Rock Assault 9 axle housings. Tested on some of the most extreme off-road race courses, these axle housings are built to tackle the toughest terrain you can find! They start with 1/4 in. formed shell for the center section, and then attach 1/2 in. face plates. The housings finally connect the DOM axle tubes to the center section with their 3-point attachment system, giving the tubes superior support and engagement into the center section. Inner axle seal and seal housings are also included. Rock Assault 9 rear axle housings are designed for wheel mount surfaces—and are complete with flanges and unit bearing pockets, as well as inner housing seals. The strength you need to climb over anything starts with Trail-Gear!
( 3 )
$989.67
—
$1,650.41
$861.01
—
$1,419.35
On Sale
Trail-Gear high-pressure power steering hose kits are great for your custom-length setups. The hoses are made from black oil-resistant high-temperature NBR rubber that's reinforced with high-tensile steel wire over a polyester braid. The outer coverings are neoprene-impregnated oil-resistant polyester braid. Features and kit contents include: * No. 6 SAE 100R5/SAE J1402 high-pressure power steering hose * Rated working pressure of 2,250 psi * Minimum bursting pressure of 9,000 psi * Suitable for use in temperatures of -40 degrees F to +275 degrees F * 120 in. of No. 6 high-pressure hose, two straight No. 6 JIC fittings, and two 90 degree No. 6 JIC fittings
( 11 )
$107.78
$91.61
On Sale
Has it been a while since you serviced your knuckles? Trail-Gear knuckle rebuild kits contain all standard replacement parts, including gaskets, felts, seals, washers, and shims to do the job done right. They even include outer felt covers--a Trail-Gear exclusive! If you're using your truck in the rocks you will want to replace these covers when you service the knuckles. Kits are offered with or without wheel bearings. Service your knuckles with Trail-Gear knuckle rebuild kits.
( 4 )
$171.53
—
$327.13
$145.80
—
$278.06
On Sale
Need the flexibility to remove a motor, transmission, or even a seat? Trail-Gear chromoly interlocking tube clamps are an ideal solution for placing a support tube across your truggy (truck-buggy) or buggy. They include a 2-piece tube clamp, two countersunk Allen head screws for installation, and are machined from 100 percent 4130 chromoly in various O.D. sizes and wall thicknesses. Step up your customization game with the Trail-Gear chromoly interlocking tube clamps designed to fit your application.
( 37 )
$48.58
—
$56.17
$41.29
—
$48.31
On Sale
After years of development and testing, Trail-Gear fully loaded Six Shooter kits have set a new standard for Toyota knuckle strength and reliability. They totally eliminate the problem of broken steering knuckles and studs. The addition of two studs in each arm effectively prevents the steering arm from becoming loose or shearing off the studs under extreme loads. The knuckle housing was designed with thicker-than-stock material, and larger gussets have been added around the outside of the knuckle for extra strength. Precision CNC-machined, each set of knuckles and steering arms are inspected and tested for the highest quality of products that Trail-Gear can deliver. These kits include a special 6-hole shim pack for use between the top of the knuckle and the steering arm assembly. A minimum of four additional steering arm studs are required for installation.
( 3 )
$494.11
—
$777.22
$474.35
—
$660.64
On Sale
Trail-Gear Super Metal knuckle stud kits are stronger and longer than stock! Constructed from a proprietary metal made exclusively for Trail Gear, these studs are manufactured to strict specifications to be 1/4 in. longer than stock and feature integrated 8mm hex heads for easy removal. Repair or upgrade your high-steer system with the great strength of Trail-Gear Super Metal knuckle stud kits.
( 4 )
$164.70
$140.00
On Sale
Trail-Gear FJ-80 knuckle rebuild kits are available with or without wheel bearings. The kits contain all of the replacement parts you need to service your steering knuckles. Trail-Gear FJ80 knuckle kits will service both left and right knuckles. Trail-Gear FJ-80 knuckle rebuild kits typically include: * Gaskets, felts, seals, washers and shims * Inner axle seals and outer felt covers
( 5 )
$137.38
—
$218.21
$116.77
—
$185.48
On Sale
Truck owners are very impressed by the lineup of Trail-Gear Rock Assault Ram steering assist kits. For example, the Toyota kits feature a selection of various-sized stroke hydraulic rams--with high-temperature inner and outer seals for long life and no leaks. Each ram includes a 3/4 in. rod that's a full 50 percent stronger than other rods on the market. The specially formed 1/4 in. heavy-duty plate steel brackets make installation a snap. Here are the parts included in most Trail-Gear Rock Assault Ram steering assist kits: * Ram with high-temperature inner and outer seals * Rod ends with jam nut * Ram bracket for axle housing * Ram bracket for tie rod * Two hoses * Two JIC 90 degree elbows * Two 1/4 in. NPT x #6 JIC steering box fittings * Mounting hardware * Instructions with photos These kits do require: * Trail-Gear High Steer crossover steering with 1.25 in. tie rod * Tapped steering box
( 3 )
$465.65
—
$517.64
$395.80
—
$439.99
On Sale
Trail-Gear Power Flow power steering pump upgrade kits remedy a common flaw in Toyota trucks. The stock pump is just barely able to supply the volume and pressure needed to run hydraulic-assist steering—putting out 1,300 psi at only one gallon per minute. The original pump is not able to provide enough fluid to run both the stock steering and the demands of a ram, especially at low rpm. Drilling out the restrictor plates in a stock pump for more volume often leads to pump failure. The answer is a replacement "TC" style pump. This provides the full fluid volume your steering box and ram are looking for, even at idle. These kits include a 1,650 psi pump, pump bracket, reservoir, reservoir bracket, belt, fittings, hoses, and hardware. The pump kits are designed to work with stock or ram drilled IFS power steering boxes. Additional notes: * The pump and bracket are designed to fit all Toyota 4-cylinder 4WD motors from 1979-95 * A large power steering fluid cooler (included) is required on the low-pressure side of the system * Pump bracket works in conjunction with stock idler bracket * If your truck is not currently equipped with power steering, you will need to purchase the idler bracket and replace the steering gearbox with one designed for use with power steering * The stock fan belt will not work with this pump and will need to be replaced with a Napa 9430 belt. Belt is included with kit. * Note: Never use ATF fluid or a semi-synthetic blend. This will void the warranty. It's okay to use standard power steering fluid or a full synthetic.
( 2 )
$857.45
—
$923.74
$754.56
—
$812.89
On Sale
So, you like to play on the rocks? Trail-Gear Rock Defense bumpers protect your rig while you're having fun! They are built strong from 1020 DOM tubing, making them more dent-resistant, as well as relinquishing any worries of split seams. Rock Defense bumpers are true bolt-on bumpers that come raw and ready to customize with whatever surface treatment you choose. For your next play date, dress your rig in Trail-Gear signature armor--Rock Defense bumpers--and enjoy roughhousing on the rocks!
( 34 )
$627.06
—
$907.07
$533.00
—
$816.36
On Sale
Looking for a steering box for your Toyota's steering system? Trail-Gear IFS remanufactured steering boxes are thoroughly flushed and rebuilt. All boxes are completely tested before shipping.
( 3 )
$690.69
$587.09
On Sale
Whether you are hitting the trail, or ripping through the desert, Trail-Gear Performance bump stops will allow you to get the most out of your vehicles suspension by eliminating harsh bottom outs. Offered in 2 in. and 2.5 in. body diameters, the 2.5 in. models will absorb more impact energy and are recommended by Trail Gear for vehicles over 5,000 lbs. or trucks with highly leveraged A-arms or trailing arms. Of course, both sizes are sure to improve your overall off-road experience. Trail-Gear Hydraulic smooth body bump stops are fully rebuildable, easily tunable through the Schrader valve on top, and TG's unique automatic velocity sensitive valving technology saves you time by eliminating the need to adjust shim packs. The bump stops also help prevent damage from occurring to expensive shocks and suspension components by absorbing impacts at full suspension compression. Trail-Gear smooth body, pin top bump stops are available in 2 in., 3 in., and 4 in. travel options, and can be purchased individually or in sets that will also include four 1/4 in. thick ASTM A36 steel weld-on universal mounting brackets. Choose the size, stroke, and quantity desired for your vehicle. Hydraulic bump stop details and benefits: * Zinc-Plated SAE 1020 steel body * Hard chromed SAE 1045 steel rod * 6061 T-6 aluminum seal housing with dual PTFE coated bronze rod guides * Viton® O-ring with U-cup seal * 6061 T-6 aluminum piston * Automatic velocity sensing valve * Anodized 6061 T-6 aluminum end cap with polyurethane wiper seal * Replaceable Delrin® contact pad for smooth and quiet operation * Tunable by adjusting the nitrogen pressure and or oil volume * Schrader valve with machined aluminum cap for quick and easy pressure adjustment * Zinc-plated steel locking nut * Adjustable from 75 to 300 psi; ships pre-charged to 200 psi--a great starting point for tuning your suspension
Not Yet Reviewed
$205.85
—
$516.35
$174.97
—
$438.90
On Sale
Trail-Gear Samurai high steer kits are specifically engineered to work with stock Samurai axles--and they're a must-have for a "spring over axle" setup. They include solid-forged 8620 steel steering arms, a heavy-duty 1 1/4 in. x .250 in. wall DOM drag link and tie rod, FJ80 tie rod ends, and all necessary hardware. There's even a hard-to-find 1:10 taper reamer for reaming out your stock pitman arm. As with all Trail-Gear products, installation is easy, and these high steer kits fit all Suzuki Samurai engines.
( 4 )
$604.16
$513.54
On Sale
Twin transfer cases not only open up new avenues for off-roading, but make the long scary descents of the past feel like child's play. Now it's time to protect your investment with Trail Gear skid plates. These crossmember skids use 3/8 in. thick steel plate with tapered bolts to fight off the most serious abusers. They work with 4 or 5-speed manual transmissions, but are not intended for automatic transmission applications. With the extra torque of twin cases Trail Gear built these crossmembers with slotted mounting holes pre-drilled allowing a total of four mounting points instead of just two. Twin transfer cases provide ranges of reduction for everything from mud to the most extreme trails. Keep them protected with Trail Gear skid plates.
( 5 )
$203.90
—
$517.64
$173.32
—
$439.99
On Sale
Trail-Gear wheel spacers are an inexpensive way to gain a little more width out of your axle housing or space your wheels for modifications and/or tire clearance. They're manufactured from 6061-T6 billet aluminum and packaged with studs and matching nuts for a proper fit. There's no need to change out your axle for a wider one when you order the pair(s) of Trail-Gear wheel spacers designed to fit your application.
( 117 )
$140.55
—
$234.53
$119.47
—
$199.35
On Sale
Trail-Gear Rock Ripper headers offer rip-roaring performance! They are made from thick stainless steel for strength, plus they will not rust, corrode, or need to be wrapped or ceramic coated. They feature 1/16 in. thick tubes going into a 1/2 in. thick header-to-head mounting flange and are TIG-welded and then polished to give them a clean look. Whether you're looking for off-road headers or 49-state legal ones, maybe you have to go 50-state legal--Trail-Gear Rock Ripper headers offer the style and performance you want and need.
( 15 )
$547.00
—
$692.27
$464.95
—
$588.43
On Sale
Anyone who wheels hard, rock crawls, or rock races has experienced blown-up trunnion bearings; no matter what size they are using, the bearing is always the point of failure. Trail-Gear Rock Assault trunnion bearing eliminator kits totally displace the bearings with a solid "king pin" style pin that sits in a hardened bushing. The pin and bushing are made from a material considered "bearing quality" because of its high carbon content, giving it extreme hardness. To make sure these pins provide you with smooth steering, Trail-Gear has added zerk grease fittings and machined the pins with grease passages and grooves--so they can be easily lubricated without any disassembly of the steering knuckle. Kits include: * Four steering pins * Four steering pin bushings * Four zerk grease fittings * Two trunnion bearing caps * One knuckle service kit
( 2 )
$586.71
$498.70
On Sale
Trail-Gear rock sliders are a great way to protect your rocker panels. They're designed for ultimate strength, starting with 1 3/4 in. O.D. x .120 in. wall 1035 DOM--the only rock sliders on the market that use 1035 DOM tubing. Their heavy-duty design can take a pounding from the rocks, while keeping body damage to a minimum--allowing you to slide over or between rocks on even the hardest trails without harm. Trail-Gear rock sliders are strong enough to hold the entire weight of the truck; a high-lift jack can be used anywhere along the sliders for repositioning the rig on the trail or simply high-lifting it up for repairs.
( 37 )
$379.12
—
$536.85
$322.25
—
$456.32
On Sale
Trail-Gear heavy-duty transfer case mounts can handle the abuse of rock crawling and the ultra-low torque of dual cases. Stamped out of 1/4 in. thick steel plate and then welded on a jig to ensure the best fit possible, these mounts are fitted with polyurethane bushings and coated with zinc for lasting performance and durability. Eliminate the worries of a busted T-case mount on the trails with the installation of bomb-proof Trail-Gear heavy-duty transfer case mounts.
( 5 )
$64.12
—
$147.25
$54.50
—
$125.16
On Sale
Trail-Gear pitman arms are designed from solid forged steel construction, and are ideal for use with crossover steering. Replacing your pitman arm is recommended if the original is worn-out or, in most cases, if your steering box is being changed out. These strong, extra-wide one-piece arms will allow the use of FJ80 tie rod ends. They're available in flat style or with the same drop as the factory pitman arm.
( 1 )
$154.08
$130.97
On Sale
Get rock-crawling control with the addition of Trail-Gear reduction gears. Lower case gears can provide the enhanced trail performance you want, and these reduction gears are precision-ground and micro-polished to do just that—at an affordable price. Gears, gaskets, seals, and possibly more (depending on the gear set chosen) are available, as well as a choice of spline configurations. Keep your rig in high performance with Trail-Gear low-range climbing reduction gears.
( 7 )
$550.62
—
$826.62
$468.03
—
$702.63
On Sale
Trail-Gear heavy-duty driveline kits will move you! The splines are 42 percent larger, and the spline section is nylon-coated to prolong many years of use on the trail. These kits come with a heavy-duty U-joint installed and full circle retaining rings to securely hold the U-joint in place. Whether you're on the track or trails, get things in motion with Trail-Gear heavy-duty driveline kits.
( 2 )
$552.17
$469.34
On Sale
Trail-Gear leaf spring shackle and hanger kits make it easy to install shackle tubes in your frame. Kit includes frame tubes, tube jigs, offset hanger with gussets, and offset shackles. Trail Gear specializes in suspension and off-road products.
( 5 )
$344.59
—
$461.87
$292.90
—
$401.83
On Sale
Trail-Gear Toyota high steer kits feature unbeatable quality at an attractive price. Crossover steering is critical for rock crawling. The stock steering just can't keep pace with today's super-flexible suspension systems. This results in broken stock steering arms and loss of steering. These kits include super-beefy, solid forged steering arms, a heavy-duty pitman arm, heavy-duty 0.250 in. wall steering rods, and rod ends. The kits are precision-fit for easy assembly.
( 3 )
$582.91
—
$950.27
$495.47
—
$807.73
Modal Header
Truck / SUV
Jeep®
Gifts, Clothing, & More
Restoration
Stock Replacement
Late Model Muscle
Tools
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
