Filters
Clearance
Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended life in each application. The compression rings feature a barrel-faced contact area for more efficient compression and CNC-controlled gap chamfer to optimize compression and reduce blow-by. Intermediate rings have a reverse twist design for better groove side sealing, and taper race machining to enhance contact. The CP-20 oil ring assemblies feature a 20 degree ear angle, an exclusive feature that provides the best possible side seal against the cylinder wall, and a special chemical polish on the oil ring expander offers enhanced oil drain back. Mahle Original piston ring sets provide unmatched quality and ease of installation, making them the rings of choice for today's engine builders.
( 51 )
$238.99
$119.50
Clearance
Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.
( 122 )
$21.99
—
$100.99
$9.50
—
$79.50
Clearance
These small block Chevy 350/400 inverted dome top pistons by SRP are made from 4032 low-expansion, high-silicon aluminum alloy that's heat-treated to SRP specifications. The ring land and crown thickness have been specifically engineered for mild turbo, supercharged, and nitrous applications. Their forced pin oiler provides increased wrist pin lubrication. A pin fitting, double Spiro locks, and a wall wrist pin are included. The CNC-machined ring grooves accept 1/16, 1/16, 3/16 rings, which are sold separately.
Not Yet Reviewed
$149.99
—
$699.99
$69.50
—
$489.50
Clearance
These CP Pistons Project X piston kits have expanded from custom racing applications to off-the-shelf, fully boxed-style pistons that fit a variety of street bikes and powersports applications. These kits include the piston, pin, locks, rings, and gasket. CP's fully boxed forgings are designed to minimize friction and reduce weight without compromising piston strength. CP Pistons Project X piston kits offer near-unbeatable strength by incorporating braces and ribs to adjust the weight balance between high and low areas. All Project X pistons come standard with a skirt coating that reduces friction, which in turn reduces heat. CP pistons Project X piston kits offer external bracing to minimize piston deformation and maintain maximum ring support, while delivering more power. All CP Project X wrist pins have Diamond-Like Coating (DLC) and are manufactured from steel with a metal-free carbon coating that is harder than steel, ensuring durability unsurpassed by any other pin on the market today!
Not Yet Reviewed
$404.94
—
$419.43
$99.50
—
$149.50
Clearance
Mahle Original individual Fire-Power piston rings are engineered to withstand the punishment of today's high-powered, nitrous oxide-injected, turbocharged and supercharged race applications. PC479 compression rings will provide superior ring durability, stable radial tension, superior combustion sealing and oil control, while protecting the cylinder walls.
Not Yet Reviewed
$814.99
—
$1,139.99
$4.50
Clearance
Total Seal CS AP Advanced Profiling ring sets feature conventional top rings, conventional second rings, and standard-tension oil rings. Total Seal CS AP Advanced Profiling ring sets are ideal for street, race, mild nitrous, and mild forced induction applications.
( 12 )
$38.16
$22.50
Clearance
Ross Racing Type 2 tool steel wrist pins are the ultimate high-strength wrist pins you've been looking for. They are 20 percent stronger than common H-11 tool steel and their lightweight design makes them perfect for high-revving engines. Specifically designed for full-floating pistons, Ross Racing Type 2 tool wrist pins are sure to provide reliability and durability for your high performance engine.
Not Yet Reviewed
$44.99
$11.50
Clearance
For budget or stock-style rebuilds, it's hard to beat the value of Sealed Power cast pistons. They're made from high-quality aluminum alloys and feature a carefully controlled casting, heat-treating, and CNC-machining process. And, because they're designed and manufactured to exceed OEM specs, these pistons provide improved reliability, performance, and a long service life. Hundreds of models are available—find the size and style designed for your engine application.
( 45 )
$1,030.99
$899.50
Clearance
Total Seal Classic street and race piston ring sets are ideal for street and mild racing applications with 10.5:1 and lower compression ratios. Each set starts with Total Seal's cast iron conventional top rings, and features cast iron second rings and 3-piece standard-tension stainless steel oil rings. Order the Classic street and race piston set to meet your application needs.
( 1 )
$60.53
—
$508.28
$19.50
—
$127.50
Clearance
Total Seal Maxseal ring sets feature premium ductile iron gapless top rings, conventional second rings, and standard-tension oil rings. Total Seal Maxseal ring sets are ideal for street, race, mild nitrous, and mild forced induction applications.
( 7 )
$216.98
$54.50
Clearance
Sierra Marine offers high-quality replacement pistons for a variety of watercraft engine applications. The forged aluminum pistons with rings are available in different bore sizes. For rebuild or maintenance, restore the performance you expect with the piston model recommended for your boat.
Not Yet Reviewed
$113.99
$68.50
Clearance
Ross Racing makes a complete line of rings for all of their stocking pistons. These regular stocking ring sets include a special high-density moly surface top ring that seats quickly and holds its seal. The second ring is a reverse-twist, taper-face cast iron design, and the oil ring is a standard-tension, 3-piece type. Choose the set designed for fitment with your engine application.
( 2 )
$109.99
$27.50
Clearance
Total Seal's Claimer ring sets feature cast iron conventional top rings, gapless second rings, and Gold Power low-tension oil rings. They're ideal for dirt track applications with 11:1 or lower compression ratios.
Not Yet Reviewed
$256.14
$64.50
Clearance
JE Pistons Pro Seal piston rings feature barrel-faced top rings made from premium ductile iron. They also have a special high-tech, friction-reducing, plasma-moly inlay on the face that combines molybdenum, nickel, chrome, and trace elements. The results are higher temperature resistance, reduced wear, better ring sealing, and reduced flaking. The second rings are a taper-faced, reverse-torsional design with a special phosphate coating. The oil-control rings are available in your choice of either low or standard-tension types. Choose the set designed for fitment on your engine application.
( 4 )
$24.99
$9.50
Clearance
Are people not looking twice at your sport compact? Give them more than a little surprise by installing a set of Wiseco sport compact pistons. These pistons are forged from either 4032 or 2168 aluminum alloy and are precisely CNC-machined to their final configuration. Where appropriate, designs incorporate the strength to deal with nitrous, turbos, or blowers. Chromoly wrist pins and Spirolox retainers are included. Order the size designed for fitment on your vehicle.
Not Yet Reviewed
$195.99
$79.50
Clearance
Carrillo 9310 Steel Series wrist pins are ISO9000 and QS9000 certified. Statistical process control (SPC) is fully implemented throughout the course of manufacturing. Wrist pins are the critical links between your pistons and connecting rods. Trust your setup to high-quality Carrillo wrist pins. 9310 Steel Series wrist pins feature: * 100 percent Rockwell tested * Case hardened (computerized gas process) * Gun-drilled I.D.s with 3 stages of I.D. honing * Weight tolerance +/- 1 gram * Precision-ground ends with I.D. radius * Straight wall design to reduce pin galling on ends * Available with or wihout chamfered ends for wire locks * Cryogenically treated (subzero heat-treating process) for improved material strength and grain structure
Not Yet Reviewed
$36.75
$24.50
Clearance
CP Pistons CPK piston kits come complete with a piston, wrist pin, locks, rings, and gasket. The anti-detonation grooves, also known as contact reduction grooves, protect the top ring by disrupting detonation waves. These grooves also limit the piston/cylinder contact during high temperatures and rpm. The featured accumulator groove is a V-shape machined into the second ring to collect excess blowby between the top and second rings. The accumulator groove also collects residual gasses during combustion and alleviates top ring flutter, while increasing ring seal. Other features, such as double pin oilers, in conjunction with their dual fed reservoir, add twice the amount of oil from the cylinder wall to the wrist pin. CP wrist pins have fine grooves that are intrinsically engraved into the product surface at the time of machining. These grooves are transformed into micro-dimple indentations to act as oil reservoirs, and the oil that would normally drain away through the grooves on an untreated product still remains in the dimples. X-forgings minimize friction and reduce weight without compromising strength. CPK piston kits go above and beyond in both quality and dependability.
Not Yet Reviewed
$290.00
$99.50
Clearance
Whether it's a car, truck, motorcycle, marine, or performance racing—properly sealing the piston to the engine block is a requirement. Hastings Piston ring sets do just that, while being offered in many different options to fit virtually any piston out there. If the engine your working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. Hasting piston ring sets are great for rebuilds or new builds. Hastings has been manufacturing piston rings since 1915 and they have not spent a second developing anything but piston rings. Trust the professionals at Hastings and use them on your next job.
( 108 )
$66.99
—
$236.99
$19.50
—
$149.50
Clearance
Wiseco 2-stroke piston rings improve the overall function of your pistons and powerplant to maximize performance and keep you firing on all cylinders. Manufactured to optimize piston lubrication and reduce friction, ensuring longer performance from the heart of your engine, these rings are crafted from various metals and with specific finishes for both street and track. The 2-stroke rings are intended for use in cast iron, NikaSil, boron composite, and electrofusion bores; certain rings are designed for limited coatings, such as CSM and CDM model rings with chrome bores. Just match up the specs from your motorcycle with the size and type piston ring replacements you need. You can always depend on race-proven technology from Wiseco!
( 6 )
$61.99
$29.50
Clearance
JE Pistons sport compact pistons are specifically engineered for extreme applications, up to and including professional competition. In this environment, the higher compression ratios, highest boost, or heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy. Their dome/dish requires no deburring or preparation and features smooth-flowing radii for excellent flame travel. A pin fitting, wire locks, and rings are included.
Not Yet Reviewed
$196.99
$49.50
Clearance
SRP small block Chevy 350/400 flat-top pistons are ideal for everything from oval track to street/strip applications. They're forged from 4032 low-expansion, high-silicon aluminum alloy that's heat-treated to SRP specifications. Each piston includes a pin fitting, double Spiro locks, and wall wrist pins. (Rings are sold separately.) These flat-tops are available in a variety size specs for fitment on specific year/model and engine applications.
Not Yet Reviewed
$124.99
$87.50
Clearance
SRP Ford small block flat top pistons fit Ford, TFS, GT40, Canfield, Brodix Track I, OE, and Dart Windsor cylinder heads. They're made from 4032 low-expansion, high-silicon aluminum alloy that's heat-treated to SRP specifications. Their CNC-machined ring grooves accept 1/16, 1/16, 3/16 in. piston rings that are sold separately, and a wrist pin is included. These flat top models are available with two or three valve reliefs, as well as a variety of bores, strokes, and rod lengths. Choose the factory-style replacements designed for fitment in your vehicle application—sold individually or in a set of 8.
( 1 )
$149.99
$69.50
—
$104.50
Clearance
SRP Ford small block dish top pistons fit Ford, TFS, GT40, Canfield, Brodix Track I, OE, and Dart Windsor cylinder head applications. They're made from 4032 low-expansion, high-silicon aluminum alloy that's heat-treated to SRP specifications. A wrist pin is included and their CNC-machined ring grooves accept 1/16, 1/16, 3/16 in. piston rings, which are sold separately. These dish top models are available in a variety of bores, strokes, and rod lengths for fitment on specific vehicles--sold individually or in a set of 8.
Not Yet Reviewed
$149.99
$69.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
